/*---------------------------------------------------------------------*/
/* --- STC MCU Limited ------------------------------------------------*/
/* --- STC 1T Series MCU Demo Programme -------------------------------*/
/* --- Mobile: (86)13922805190 ----------------------------------------*/
/* --- Fax: 86-0513-55012956,55012947,55012969 ------------------------*/
/* --- Tel: 86-0513-55012928,55012929,55012966 ------------------------*/
/* --- Web: www.STCMCU.com --------------------------------------------*/
/* --- Web: www.STCMCUDATA.com  ---------------------------------------*/
/* --- QQ:  800003751 -------------------------------------------------*/
/* 如果要在程序中使用此代码,请在程序中注明使用了STC的资料及程序            */
/*---------------------------------------------------------------------*/

#ifndef __ADC_H
#define __ADC_H

#include "config.h"

#define ADC_RES_12BIT       0  // 0: MCU为10位ADC; 1: MCU为12位ADC

#define ADC_P10             0x01  // IO引脚 Px.0
#define ADC_P11             0x02  // IO引脚 Px.1
#define ADC_P12             0x04  // IO引脚 Px.2
#define ADC_P13             0x08  // IO引脚 Px.3
#define ADC_P14             0x10  // IO引脚 Px.4
#define ADC_P15             0x20  // IO引脚 Px.5
#define ADC_P16             0x40  // IO引脚 Px.6
#define ADC_P17             0x80  // IO引脚 Px.7
#define ADC_P1_All          0xFF  // IO所有引脚

#define ADC_POWER           (1 << 7)  // ADC 电源
#define ADC_START           (1 << 6)  // ADC 转换启动控制位。自动清0
#define ADC_FLAG            (1 << 5)  // ADC 转换结束标志位。软件清0
#define ADC_EPWMT           (1 << 4)  // 使能 PWM 同步触发 ADC 功能
#define ADC_CH0             0
#define ADC_CH1             1
#define ADC_CH2             2
#define ADC_CH3             3
#define ADC_CH4             4
#define ADC_CH5             5
#define ADC_CH6             6
#define ADC_CH7             7
#define ADC_CH8             8
#define ADC_CH9             9
#define ADC_CH10            10
#define ADC_CH11            11
#define ADC_CH12            12
#define ADC_CH13            13
#define ADC_CH14            14
#define ADC_CH15            15

#define ADC_SPEED_2X1T      0   // SYSclk/2/1
#define ADC_SPEED_2X2T      1   // SYSclk/2/2
#define ADC_SPEED_2X3T      2   // SYSclk/2/3
#define ADC_SPEED_2X4T      3   // SYSclk/2/4
#define ADC_SPEED_2X5T      4   // SYSclk/2/5
#define ADC_SPEED_2X6T      5   // SYSclk/2/6
#define ADC_SPEED_2X7T      6   // SYSclk/2/7
#define ADC_SPEED_2X8T      7   // SYSclk/2/8
#define ADC_SPEED_2X9T      8   // SYSclk/2/9
#define ADC_SPEED_2X10T     9   // SYSclk/2/10
#define ADC_SPEED_2X11T     10  // SYSclk/2/11
#define ADC_SPEED_2X12T     11  // SYSclk/2/12
#define ADC_SPEED_2X13T     12  // SYSclk/2/13
#define ADC_SPEED_2X14T     13  // SYSclk/2/14
#define ADC_SPEED_2X15T     14  // SYSclk/2/15
#define ADC_SPEED_2X16T     15  // SYSclk/2/16

#define ADC_LEFT_JUSTIFIED  0  // ADC Result left-justified
#define ADC_RIGHT_JUSTIFIED 1  // ADC Result right-justified

typedef struct {
  u8 ADC_SMPduty;    // ADC 模拟信号采样时间控制, 0~31（注意： SMPDUTY 一定不能设置小于 10）
  u8 ADC_Speed;      // 设置 ADC 工作时钟频率	ADC_SPEED_2X1T~ADC_SPEED_2X16T
  u8 ADC_Power;      // ADC功率允许/关闭	ENABLE,DISABLE
  u8 ADC_AdjResult;  // ADC结果调整,	ADC_LEFT_JUSTIFIED,ADC_RIGHT_JUSTIFIED
  u8 ADC_Priority;   // 优先级设置	Priority_0,Priority_1,Priority_2,Priority_3
  u8 ADC_Interrupt;  // 中断允许	ENABLE,DISABLE
  u8 ADC_CsSetup;    // ADC 通道选择时间控制 0(默认),1
  u8 ADC_CsHold;     // ADC 通道选择保持时间控制 0,1(默认),2,3
} ADC_InitTypeDef;

static void ADC_Inilize(ADC_InitTypeDef *ADCx);
void        ADC_PowerControl(u8 pwr);
u16         Get_ADCResult(u8 channel);  // channel = 0~15
void        ADC_config(void);
extern u16  adc_date;
#endif