CreatBot/CreatBotKlipper
6
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

extruder: Treat extrude with Z only movement to be an "extrude only" move

Browse Source 
Do not apply max_extrude_cross_section check, and do apply
extrude_only_xxx checks to Z only moves that also extrude.  Some
printer start scripts will prime the extruder while moving the Z.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor
2019-11-07 09:45:36 -05:00
parent 86121ff79e
commit 2981bd601b
2 changed files with 2 additions and 2 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
config/example.cfg
View File

@@ -121,7 +121,7 @@ filament_diameter: 3.500
#max_extrude_only_accel:
# Maximum velocity (in mm/s) and acceleration (in mm/s^2) of the
# extruder motor for retractions and extrude-only moves. These
# settings do not place any limit on normal printing moves. If not
# settings do not have any impact on normal printing moves. If not
# specified then they are calculated to match the limit an XY
# printing move with a cross section of 4.0*nozzle_diameter^2 would
# have.