diff --git a/config/CreatBot_D1000/base.cfg b/config/CreatBot_D1000/base.cfg
index aa8bd63f7..3a4b2b846 100644
--- a/config/CreatBot_D1000/base.cfg
+++ b/config/CreatBot_D1000/base.cfg
@@ -501,24 +501,6 @@ gcode:
     G1 E-{unload_distance} F{max_velocity} # fast-unload
     RESTORE_GCODE_STATE NAME=unload_state
 
-[gcode_macro SET_X_OFFSET]
-gcode:
-    {% set svv = printer.save_variables.variables %}
-    {% set dual_x_offset=params.S|default(-60)|float %}
-    SAVE_VARIABLE VARIABLE=dual_x_offset VALUE={dual_x_offset}
-
-[gcode_macro SET_Y_OFFSET]
-gcode:
-    {% set svv = printer.save_variables.variables %}
-    {% set dual_y_offset=params.S|default(0)|float %}
-    SAVE_VARIABLE VARIABLE=dual_y_offset VALUE={dual_y_offset}
-
-[gcode_macro SET_Z_OFFSET]
-gcode:
-    {% set svv = printer.save_variables.variables %}
-    {% set dual_z_offset=params.S|default(0)|float %}
-    SAVE_VARIABLE VARIABLE=dual_z_offset VALUE={dual_z_offset}
-
 [gcode_macro _ACTIVATE_DEFAULT_EXTRUDER]
   gcode:
     {% if printer.toolhead.extruder == 'extruder' %}
diff --git a/config/CreatBot_D1000_V0/base.cfg b/config/CreatBot_D1000_V0/base.cfg
index 8a80cce06..058208929 100644
--- a/config/CreatBot_D1000_V0/base.cfg
+++ b/config/CreatBot_D1000_V0/base.cfg
@@ -437,24 +437,6 @@ gcode:
     G1 E-{unload_distance} F{max_velocity} # fast-unload
     RESTORE_GCODE_STATE NAME=unload_state
 
-[gcode_macro SET_X_OFFSET]
-gcode:
-    {% set svv = printer.save_variables.variables %}
-    {% set dual_x_offset=params.S|default(-60)|float %}
-    SAVE_VARIABLE VARIABLE=dual_x_offset VALUE={dual_x_offset}
-
-[gcode_macro SET_Y_OFFSET]
-gcode:
-    {% set svv = printer.save_variables.variables %}
-    {% set dual_y_offset=params.S|default(0)|float %}
-    SAVE_VARIABLE VARIABLE=dual_y_offset VALUE={dual_y_offset}
-
-[gcode_macro SET_Z_OFFSET]
-gcode:
-    {% set svv = printer.save_variables.variables %}
-    {% set dual_z_offset=params.S|default(0)|float %}
-    SAVE_VARIABLE VARIABLE=dual_z_offset VALUE={dual_z_offset}
-
 [gcode_macro _ACTIVATE_DEFAULT_EXTRUDER]
   gcode:
     {% if printer.toolhead.extruder == 'extruder' %}
diff --git a/config/CreatBot_D600Pro2/base.cfg b/config/CreatBot_D600Pro2/base.cfg
index ab03e3348..8d9fc7c34 100644
--- a/config/CreatBot_D600Pro2/base.cfg
+++ b/config/CreatBot_D600Pro2/base.cfg
@@ -501,24 +501,6 @@ gcode:
     G1 E-{unload_distance} F{max_velocity} # fast-unload
     RESTORE_GCODE_STATE NAME=unload_state
 
-[gcode_macro SET_X_OFFSET]
-gcode:
-    {% set svv = printer.save_variables.variables %}
-    {% set dual_x_offset=params.S|default(-60)|float %}
-    SAVE_VARIABLE VARIABLE=dual_x_offset VALUE={dual_x_offset}
-
-[gcode_macro SET_Y_OFFSET]
-gcode:
-    {% set svv = printer.save_variables.variables %}
-    {% set dual_y_offset=params.S|default(0)|float %}
-    SAVE_VARIABLE VARIABLE=dual_y_offset VALUE={dual_y_offset}
-
-[gcode_macro SET_Z_OFFSET]
-gcode:
-    {% set svv = printer.save_variables.variables %}
-    {% set dual_z_offset=params.S|default(0)|float %}
-    SAVE_VARIABLE VARIABLE=dual_z_offset VALUE={dual_z_offset}
-
 [gcode_macro _ACTIVATE_DEFAULT_EXTRUDER]
   gcode:
     {% if printer.toolhead.extruder == 'extruder' %}
diff --git a/config/CreatBot_D600Pro2_V0/base.cfg b/config/CreatBot_D600Pro2_V0/base.cfg
index fc8513401..3a2b8e3d6 100644
--- a/config/CreatBot_D600Pro2_V0/base.cfg
+++ b/config/CreatBot_D600Pro2_V0/base.cfg
@@ -437,24 +437,6 @@ gcode:
     G1 E-{unload_distance} F{max_velocity} # fast-unload
     RESTORE_GCODE_STATE NAME=unload_state
 
-[gcode_macro SET_X_OFFSET]
-gcode:
-    {% set svv = printer.save_variables.variables %}
-    {% set dual_x_offset=params.S|default(-60)|float %}
-    SAVE_VARIABLE VARIABLE=dual_x_offset VALUE={dual_x_offset}
-
-[gcode_macro SET_Y_OFFSET]
-gcode:
-    {% set svv = printer.save_variables.variables %}
-    {% set dual_y_offset=params.S|default(0)|float %}
-    SAVE_VARIABLE VARIABLE=dual_y_offset VALUE={dual_y_offset}
-
-[gcode_macro SET_Z_OFFSET]
-gcode:
-    {% set svv = printer.save_variables.variables %}
-    {% set dual_z_offset=params.S|default(0)|float %}
-    SAVE_VARIABLE VARIABLE=dual_z_offset VALUE={dual_z_offset}
-
 [gcode_macro _ACTIVATE_DEFAULT_EXTRUDER]
   gcode:
     {% if printer.toolhead.extruder == 'extruder' %}
diff --git a/config/CreatBot_F430NX/base.cfg b/config/CreatBot_F430NX/base.cfg
index 951f2ee92..f2790f6de 100644
--- a/config/CreatBot_F430NX/base.cfg
+++ b/config/CreatBot_F430NX/base.cfg
@@ -633,24 +633,6 @@ gcode:
     LED_SET LED={led_name} RED={red} GREEN={green} BLUE={blue} WHITE={white} INDEX={index} TRANSMIT={transmit} SYNC={sync}
   {% endif %}
 
-[gcode_macro SET_X_OFFSET]
-gcode:
-    {% set svv = printer.save_variables.variables %}
-    {% set dual_x_offset=params.S|default(0)|float %}
-    SAVE_VARIABLE VARIABLE=dual_x_offset VALUE={dual_x_offset}
-
-[gcode_macro SET_Y_OFFSET]
-gcode:
-    {% set svv = printer.save_variables.variables %}
-    {% set dual_y_offset=params.S|default(0)|float %}
-    SAVE_VARIABLE VARIABLE=dual_y_offset VALUE={dual_y_offset}
-
-[gcode_macro SET_Z_OFFSET]
-gcode:
-    {% set svv = printer.save_variables.variables %}
-    {% set dual_z_offset=params.S|default(0)|float %}
-    SAVE_VARIABLE VARIABLE=dual_z_offset VALUE={dual_z_offset}
-
 [gcode_macro LOAD_FILAMENT]
 variable_load_distance:  90
 variable_purge_distance:  20