diff --git a/klippy/mcu.py b/klippy/mcu.py
index e7c28a037..256c15f21 100644
--- a/klippy/mcu.py
+++ b/klippy/mcu.py
@@ -341,7 +341,7 @@ class MCU_pwm:
                 or self._shutdown_value not in [0., 1.]):
                 raise pins.error(
                     "start and shutdown values must be 0.0 or 1.0 on soft pwm")
-            self._pwm_max = self._mcu.get_constant_float("SOFT_PWM_MAX")
+            self._pwm_max = float(cycle_ticks)
             if self._is_static:
                 self._mcu.add_config_cmd("set_digital_out pin=%s value=%d" % (
                     self._pin, self._start_value >= 0.5))
@@ -354,7 +354,8 @@ class MCU_pwm:
                     self._start_value >= 0.5, self._shutdown_value >= 0.5,
                     self._mcu.seconds_to_clock(self._max_duration)))
             self._set_cmd = self._mcu.lookup_command(
-                "schedule_soft_pwm_out oid=%c clock=%u value=%hu", cq=cmd_queue)
+                "schedule_soft_pwm_out oid=%c clock=%u on_ticks=%u",
+                cq=cmd_queue)
     def set_pwm(self, print_time, value):
         clock = self._mcu.print_time_to_clock(print_time)
         if self._invert:
diff --git a/src/gpiocmds.c b/src/gpiocmds.c
index 1d48a40e4..91d97b75c 100644
--- a/src/gpiocmds.c
+++ b/src/gpiocmds.c
@@ -106,9 +106,6 @@ DECL_COMMAND(command_set_digital_out, "set_digital_out pin=%u value=%c");
  * Soft PWM output pins
  ****************************************************************/
 
-#define MAX_SOFT_PWM 256
-DECL_CONSTANT("SOFT_PWM_MAX", MAX_SOFT_PWM);
-
 struct soft_pwm_s {
     struct timer timer;
     uint32_t on_duration, off_duration, end_time;
@@ -192,17 +189,14 @@ void
 command_schedule_soft_pwm_out(uint32_t *args)
 {
     struct soft_pwm_s *s = oid_lookup(args[0], command_config_soft_pwm_out);
-    uint32_t time = args[1];
-    uint16_t value = args[2];
+    uint32_t time = args[1], next_on_duration = args[2], next_off_duration;
     uint8_t next_flags = SPF_CHECK_END | SPF_HAVE_NEXT;
-    uint32_t next_on_duration, next_off_duration;
-    if (value == 0 || value >= MAX_SOFT_PWM) {
-        next_on_duration = next_off_duration = 0;
-        next_flags |= value ? SPF_NEXT_ON : 0;
-        if (!!value != s->default_value && s->max_duration)
+    if (next_on_duration == 0 || next_on_duration >= s->cycle_time) {
+        next_flags |= next_on_duration ? SPF_NEXT_ON : 0;
+        if (!!next_on_duration != s->default_value && s->max_duration)
             next_flags |= SPF_NEXT_CHECK_END;
+        next_on_duration = next_off_duration = 0;
     } else {
-        next_on_duration = (s->cycle_time / MAX_SOFT_PWM) * value;
         next_off_duration = s->cycle_time - next_on_duration;
         next_flags |= SPF_NEXT_ON | SPF_NEXT_TOGGLING;
         if (s->max_duration)
@@ -227,7 +221,7 @@ command_schedule_soft_pwm_out(uint32_t *args)
     irq_enable();
 }
 DECL_COMMAND(command_schedule_soft_pwm_out,
-             "schedule_soft_pwm_out oid=%c clock=%u value=%hu");
+             "schedule_soft_pwm_out oid=%c clock=%u on_ticks=%u");
 
 void
 soft_pwm_shutdown(void)