CreatBot/CreatBotKlipper
6
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

gcode: Remove support for "G4 S1" style commands

Browse Source 
The S parameter is not a standard and was not commonly used.  The P
parameter (delay specified in milliseconds) is the commonly accepted
g-code mechanism for dwelling.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor
2019-11-24 21:16:53 -05:00
parent 2d97e0e218
commit 8e87ab0939
2 changed files with 5 additions and 4 deletions
Download Patch File Download Diff File Expand all files Collapse all files

4
docs/Config_Changes.md
View File

@@ -6,6 +6,10 @@ All dates in this document are approximate.
# Changes
20191202: Support for the undocumented "S" parameter of the "G4"
command has been removed. Replace any occurrences of S with the
standard "P" parameter (the delay specified in milliseconds).
20191126: The USB names have changed on micro-controllers with native
USB support. They now use a unique chip id by default (where
available). If an "mcu" config section uses a "serial" setting that