CreatBot/CreatBotKlipper
CreatBot/CreatBotKlipper
7
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Merge branch 'develop'

Browse Source
This commit is contained in:
张开科 2024-10-18 16:33:44 +08:00
commit a012f4d942
4 changed files with 526 additions and 54 deletions
config
CreatBot_D1000
base.cfg
CreatBot_D600Pro2
base.cfgprinter.cfg
CreatBot_F430NX
base.cfg

194
config/CreatBot_D1000/base.cfg

@ -137,7 +137,7 @@ pwm_cycle_time: 0.3
[verify_heater chamber]
max_error: 120
hysteresis: 0
hysteresis: 100
check_gain_time: 3600
heating_gain: 0.01
@ -149,15 +149,15 @@ kick_start_time: 1.0
off_below: 0.10
[filament_switch_sensor extruder]
pause_on_runout: True
runout_gcode:
pause_on_runout: False
runout_gcode: _RUNOUT_HANDLE
event_delay: 3.0
pause_delay: 0.5
switch_pin: ^PC14
[filament_switch_sensor extruder1]
pause_on_runout: True
runout_gcode:
pause_on_runout: False
runout_gcode: _RUNOUT_HANDLE
event_delay: 3.0
pause_delay: 0.5
switch_pin: ^PC15
@ -347,13 +347,15 @@ initial_angle: 135
# initial_pulse_width:
[safe_z_home]
home_xy_position: 500,500
home_xy_position: 400,400
speed:100
z_hop:5
z_hop_speed: 10
[gcode_macro ENABLE_FORCE_MOVE]
gcode:
SET_STEPPER_ENABLE STEPPER=stepper_x ENABLE=1
SET_STEPPER_ENABLE STEPPER=stepper_y ENABLE=1
SET_KINEMATIC_POSITION X=500 Y=500 Z=500
[gcode_macro T0]
@ -365,6 +367,7 @@ gcode:
SET_GCODE_OFFSET X=0
SET_SERVO SERVO=switch_nozzle angle=45
ACTIVATE_EXTRUDER EXTRUDER=extruder
_RUNOUT_HANDLE
[gcode_macro T1]
gcode:
@ -379,6 +382,7 @@ gcode:
SET_GCODE_OFFSET X={x_offset}
SET_SERVO SERVO=switch_nozzle angle=225
ACTIVATE_EXTRUDER EXTRUDER=extruder1
_RUNOUT_HANDLE
[gcode_macro PROBE_SERVO_OPEN]
gcode:
@ -388,6 +392,10 @@ gcode:
[gcode_macro PROBE_SERVO_CLOSE]
gcode:
SET_SERVO SERVO=probe_servo angle=130
[gcode_macro _START_PRINT_BASE]
description: Call when starting to print
gcode:
_RUNOUT_HANDLE
[gcode_macro START_PRINT]
gcode:
@ -452,7 +460,7 @@ gcode:
RESTORE_GCODE_STATE NAME=load_state
[gcode_macro UNLOAD_FILAMENT]
variable_unload_distance: 120
variable_unload_distance: 140
variable_purge_distance: 25
gcode:
{% set speed = params.SPEED|default(200) %}
@ -490,6 +498,9 @@ gcode:
T1
{% endif %}
########################################
# GCODE
########################################
[gcode_macro G28]
rename_existing: C28
gcode:
@ -499,9 +510,13 @@ gcode:
{% set do_z = 'Z' in params|string %}
{% if do_x %}
SET_STEPPER_ENABLE STEPPER=stepper_x ENABLE=1
G4 P300
{% set homing_cmd = 'X ' %}
{% endif %}
{% if do_y %}
SET_STEPPER_ENABLE STEPPER=stepper_y ENABLE=1
G4 P300
{% set homing_cmd = homing_cmd + 'Y ' %}
{% endif %}
{% if do_z %}
@ -512,6 +527,9 @@ gcode:
{% endif %}
{% endif %}
{% if not homing_cmd %}
SET_STEPPER_ENABLE STEPPER=stepper_x ENABLE=1
SET_STEPPER_ENABLE STEPPER=stepper_y ENABLE=1
G4 P300
C28
_ACTIVATE_DEFAULT_EXTRUDER
{% else %}
@ -521,6 +539,22 @@ gcode:
{% endif %}
{% endif %}
[gcode_macro M109]
rename_existing: C109
gcode:
{% set hotend = "extruder" %}
{% set s = params.S|default(0)|float %}
{% set t = params.T|default(0)|int %}
{% if params.S is defined %}
{% if t != 0 %}
{% set hotend = hotend ~ t %}
{% endif %}
SET_HEATER_TEMPERATURE HEATER={hotend} TARGET={s}
{% if s != 0 %}
TEMPERATURE_WAIT SENSOR={hotend} MINIMUM={s-3} MAXIMUM={s+3}
{% endif %}
{% endif %}
[gcode_macro M141]
gcode:
{% set s = params.S|default(0)|float %}
@ -528,13 +562,24 @@ gcode:
SET_HEATER_TEMPERATURE HEATER=chamber target={s|int}
{% endif %}
[gcode_macro M190]
rename_existing: C190
gcode:
{% set s = params.S|default(0)|float %}
{% if params.S is defined %}
SET_HEATER_TEMPERATURE HEATER="heater_bed" TARGET={s}
{% if s != 0 %}
TEMPERATURE_WAIT SENSOR="heater_bed" MINIMUM={s-3} MAXIMUM={s+3}
{% endif %}
{% endif %}
[gcode_macro M191]
gcode:
{% set s = params.S|default(0)|float %}
{% if params.S is defined %}
M141 S{s}
{% if s != 0 %}
TEMPERATURE_WAIT SENSOR="heater_generic chamber" MINIMUM={s-2} MAXIMUM={s+2}
TEMPERATURE_WAIT SENSOR="heater_generic chamber" MINIMUM={s-3} MAXIMUM={s+3}
{% endif %}
{% endif %}
@ -544,6 +589,9 @@ gcode:
C84
SET_STEPPER_ENABLE STEPPER=stepper_z enable=1
########################################
# CANCEL_PRINT/PAUSE/RESUME/
########################################
[gcode_macro _CLIENT_VARIABLE]
variable_use_custom_pos : True
variable_custom_park_x : 500.0
@ -562,8 +610,11 @@ variable_park_at_cancel_y : None
variable_use_fw_retract : False
variable_idle_timeout : 600
variable_runout_sensor : ""
variable_filament_sensor : "filament_switch_sensor extruder"
variable_filament_sensor1 : "filament_switch_sensor extruder1"
variable_user_temp_resume : "_USER_TEMP_RESUME"
variable_user_pause_macro : "_USER_PAUSE"
variable_user_resume_macro: "_USER_RESUME"
variable_user_resume_macro: ""
variable_user_cancel_macro: "_USER_CANCEL"
gcode:
# Nothing
@ -579,11 +630,7 @@ gcode:
SET_GCODE_VARIABLE MACRO=RESUME VARIABLE={name} VALUE="{{'restore': restore, 'temp': temp}}"
{% endfor %}
[gcode_macro RESUME]
variable_last_extruder_temp: {'restore': False, 'temp': 0}
variable_last_extruder1_temp: {'restore': False, 'temp': 0}
[gcode_macro _USER_RESUME]
[gcode_macro _USER_TEMP_RESUME]
gcode:
{% set extruder_info = [
{'index': 0, 'name': 'last_extruder_temp'},
@ -608,4 +655,121 @@ gcode:
[gcode_macro _USER_CANCEL]
gcode:
M84
G91
G1 Z30 F600 ; lift nozzle
M84
[gcode_macro RESUME]
description: Resume the actual running print
rename_existing: RESUME_BASE
variable_last_extruder_temp: {'restore': False, 'temp': 0}
variable_last_extruder1_temp: {'restore': False, 'temp': 0}
variable_restore_idle_timeout: 0
variable_idle_state: False
variable_filament_state: False
gcode:
##### get user parameters or use default #####
{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
{% set can_extrude = True if printer.toolhead.extruder == '' # no extruder defined in config
else printer[printer.toolhead.extruder].can_extrude %} # status of active extruder
{% set do_resume = False %}
{% set prompt_txt = [] %}
{% set runout = True %}
##### end of definitions #####
_FILAMENT_UPDATE
#### Printer comming from timeout idle state ####
{% if printer.idle_timeout.state|upper == "IDLE" or idle_state %}
SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=idle_state VALUE=False
{% if last_extruder_temp.restore or last_extruder1_temp.restore %}
# we need to use the unicode (\u00B0) for the ° as py2 env's would throw an error otherwise
RESPOND TYPE=echo MSG='{"Restoring \"%s\" temperature to %3.1f\u00B0C, this may take some time" % (printer.toolhead.extruder, last_extruder_temp.temp) }'
{client.user_temputer_macro|default("")}
{% set do_resume = True %}
{% elif can_extrude %}
{% set do_resume = True %}
{% else %}
RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder}'
{% set _d = prompt_txt.append("\"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder) %}
{% endif %}
#### Printer comming out of regular PAUSE state ####
{% elif can_extrude %}
{% set do_resume = True %}
{% else %}
RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder}'
{% set _d = prompt_txt.append("\"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder) %}
{% endif %}
_ACT_RESUME DO_RESUME={do_resume}
[gcode_macro _ACT_RESUME]
gcode:
##### get user parameters or use default #####
{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
{% set sp_move = client.speed_move|default(velocity) %}
{% set do_resume = true if params.DO_RESUME|default(False)|lower == 'true' else false %}
{% set filament_state = printer['gcode_macro RESUME'].filament_state|default(False) %}
{% set restore_idle_timeout = printer['gcode_macro RESUME'].restore_idle_timeout|default(0) %}
{% set prompt_txt = [] %}
{% if filament_state %}
{% if do_resume %}
{% if restore_idle_timeout > 0 %} SET_IDLE_TIMEOUT TIMEOUT={restore_idle_timeout} {% endif %} # restore idle_timeout time
{client.user_resume_macro|default("")}
_CLIENT_EXTRUDE
RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}
{% endif %}
{% else %}
RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" detects no filament, please load filament and press RESUME" % printer.toolhead.extruder}'
{% set _d = prompt_txt.append("\"%s\" detects no filament, please load filament and press RESUME" % printer.toolhead.extruder) %}
{% endif %}
##### Generate User Information box in case of abort #####
{% if not (filament_state and do_resume) %}
RESPOND TYPE=command MSG="action:prompt_begin RESUME aborted !!!"
{% for element in prompt_txt %}
RESPOND TYPE=command MSG='{"action:prompt_text %s" % element}'
{% endfor %}
RESPOND TYPE=command MSG="action:prompt_footer_button Ok|RESPOND TYPE=command MSG=action:prompt_end|info"
RESPOND TYPE=command MSG="action:prompt_show"
{% endif %}
########################################
# filament_runout
########################################
[gcode_macro _FILAMENT_UPDATE]
gcode:
{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
{% set runout_resume = True if client.filament_sensor|default("") == "" # no runout
else True if not printer[client.filament_sensor].enabled # sensor is disabled
else printer[client.filament_sensor].filament_detected %} # sensor status
{% set runout_resume1 = True if client.filament_sensor1|default("") == "" # no runout
else True if not printer[client.filament_sensor1].enabled # sensor1 is disabled
else printer[client.filament_sensor1].filament_detected %} # sensor1 status
##### filament check #####
{% if printer["dual_carriage"] is not defined %}
{% set runout = runout_resume if printer.toolhead.extruder == "extruder" else runout_resume1 %}
{% else %}
{% set current_idex_mode = printer["dual_carriage"].carriage_1|lower %}
{% if current_idex_mode == 'copy' or current_idex_mode == 'mirror' %}
{% set runout = (runout_resume == false or runout_resume1 == false) %}
{% else %}
{% set runout = runout_resume if printer.toolhead.extruder == "extruder" else runout_resume1 %}
{% endif %}
{% endif %}
SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=filament_state VALUE={ runout }
[gcode_macro _RUNOUT_HANDLE]
description: filament state update
gcode:
_FILAMENT_UPDATE
{% if printer.print_stats.state == "printing" %}
_RUNOUT_PAUSE
{% endif %}
[gcode_macro _RUNOUT_PAUSE]
gcode:
{% set filament_state = printer['gcode_macro RESUME'].filament_state|default(False) %}
{% if not filament_state %}
{% set msg_extruder = "extruder" if printer.toolhead.extruder == "extruder" else "extruder1" %}
RESPOND TYPE=echo MSG='{"Noting! \"%s\" filament has been pulled out." % msg_extruder}'
PAUSE
{% endif %}

202
config/CreatBot_D600Pro2/base.cfg

@ -94,7 +94,7 @@ step_pin: PD7
dir_pin: PD6
enable_pin: !PD5
rotation_distance: 5
gear_ratio: 3:1
gear_ratio: 2.5:1
microsteps: 16
full_steps_per_rotation: 200
endstop_pin: probe:z_virtual_endstop
@ -137,7 +137,7 @@ pwm_cycle_time: 0.3
[verify_heater chamber]
max_error: 120
# hysteresis: 0
hysteresis: 100
check_gain_time: 3600
heating_gain: 0.01
@ -149,15 +149,15 @@ kick_start_time: 1.0
off_below: 0.10
[filament_switch_sensor extruder]
pause_on_runout: True
runout_gcode:
pause_on_runout: False
runout_gcode: _RUNOUT_HANDLE
event_delay: 3.0
pause_delay: 0.5
switch_pin: ^PC14
[filament_switch_sensor extruder1]
pause_on_runout: True
runout_gcode:
pause_on_runout: False
runout_gcode: _RUNOUT_HANDLE
event_delay: 3.0
pause_delay: 0.5
switch_pin: ^PC15
@ -252,9 +252,9 @@ min_extrude_temp: 180
pressure_advance: 0.03
pressure_advance_smooth_time:0.040
# control = pid
# pid_kp = 24.737
# pid_ki = 1.137
# pid_kd = 134.508
# pid_kp = 21.950
# pid_ki = 0.887
# pid_kd = 135.815
[tmc5160 extruder]
cs_pin:tool:PB7
@ -301,9 +301,9 @@ min_extrude_temp: 180
pressure_advance: 0.032
pressure_advance_smooth_time:0.040
# control = pid
# pid_kp = 24.737
# pid_ki = 1.137
# pid_kd = 134.508
# pid_kp = 21.950
# pid_ki = 0.887
# pid_kd = 135.815
[tmc5160 extruder1]
cs_pin:tool:PC11
@ -354,6 +354,8 @@ z_hop_speed: 10
[gcode_macro ENABLE_FORCE_MOVE]
gcode:
SET_STEPPER_ENABLE STEPPER=stepper_x ENABLE=1
SET_STEPPER_ENABLE STEPPER=stepper_y ENABLE=1
SET_KINEMATIC_POSITION X=300 Y=300 Z=300
[gcode_macro T0]
@ -365,6 +367,7 @@ gcode:
SET_GCODE_OFFSET X=0
SET_SERVO SERVO=switch_nozzle angle=45
ACTIVATE_EXTRUDER EXTRUDER=extruder
_RUNOUT_HANDLE
[gcode_macro T1]
gcode:
@ -379,6 +382,7 @@ gcode:
SET_GCODE_OFFSET X={x_offset}
SET_SERVO SERVO=switch_nozzle angle=225
ACTIVATE_EXTRUDER EXTRUDER=extruder1
_RUNOUT_HANDLE
[gcode_macro PROBE_SERVO_OPEN]
gcode:
@ -389,6 +393,11 @@ gcode:
gcode:
SET_SERVO SERVO=probe_servo angle=130
[gcode_macro _START_PRINT_BASE]
description: Call when starting to print
gcode:
_RUNOUT_HANDLE
[gcode_macro START_PRINT]
gcode:
{% set BED_TEMP = params.BED|default(0)|float %}
@ -452,7 +461,7 @@ gcode:
RESTORE_GCODE_STATE NAME=load_state
[gcode_macro UNLOAD_FILAMENT]
variable_unload_distance: 120
variable_unload_distance: 140
variable_purge_distance: 25
gcode:
{% set speed = params.SPEED|default(200) %}
@ -490,6 +499,10 @@ gcode:
T1
{% endif %}
########################################
# GCODE
########################################
[gcode_macro G28]
rename_existing: C28
gcode:
@ -521,6 +534,22 @@ gcode:
{% endif %}
{% endif %}
[gcode_macro M109]
rename_existing: C109
gcode:
{% set hotend = "extruder" %}
{% set s = params.S|default(0)|float %}
{% set t = params.T|default(0)|int %}
{% if params.S is defined %}
{% if t != 0 %}
{% set hotend = hotend ~ t %}
{% endif %}
SET_HEATER_TEMPERATURE HEATER={hotend} TARGET={s}
{% if s != 0 %}
TEMPERATURE_WAIT SENSOR={hotend} MINIMUM={s-3} MAXIMUM={s+3}
{% endif %}
{% endif %}
[gcode_macro M141]
gcode:
{% set s = params.S|default(0)|float %}
@ -528,13 +557,24 @@ gcode:
SET_HEATER_TEMPERATURE HEATER=chamber target={s|int}
{% endif %}
[gcode_macro M190]
rename_existing: C190
gcode:
{% set s = params.S|default(0)|float %}
{% if params.S is defined %}
SET_HEATER_TEMPERATURE HEATER="heater_bed" TARGET={s}
{% if s != 0 %}
TEMPERATURE_WAIT SENSOR="heater_bed" MINIMUM={s-3} MAXIMUM={s+3}
{% endif %}
{% endif %}
[gcode_macro M191]
gcode:
{% set s = params.S|default(0)|float %}
{% if params.S is defined %}
M141 S{s}
{% if s != 0 %}
TEMPERATURE_WAIT SENSOR="heater_generic chamber" MINIMUM={s-2} MAXIMUM={s+2}
TEMPERATURE_WAIT SENSOR="heater_generic chamber" MINIMUM={s-3} MAXIMUM={s+3}
{% endif %}
{% endif %}
@ -544,6 +584,10 @@ gcode:
C84
SET_STEPPER_ENABLE STEPPER=stepper_z enable=1
########################################
# CANCEL_PRINT/PAUSE/RESUME/
########################################
[gcode_macro _CLIENT_VARIABLE]
variable_use_custom_pos : True
variable_custom_park_x : 300.0
@ -562,8 +606,11 @@ variable_park_at_cancel_y : None
variable_use_fw_retract : False
variable_idle_timeout : 600
variable_runout_sensor : ""
variable_filament_sensor : "filament_switch_sensor extruder"
variable_filament_sensor1 : "filament_switch_sensor extruder1"
variable_user_temp_resume : "_USER_TEMP_RESUME"
variable_user_pause_macro : "_USER_PAUSE"
variable_user_resume_macro: "_USER_RESUME"
variable_user_resume_macro: ""
variable_user_cancel_macro: "_USER_CANCEL"
gcode:
# Nothing
@ -579,11 +626,7 @@ gcode:
SET_GCODE_VARIABLE MACRO=RESUME VARIABLE={name} VALUE="{{'restore': restore, 'temp': temp}}"
{% endfor %}
[gcode_macro RESUME]
variable_last_extruder_temp: {'restore': False, 'temp': 0}
variable_last_extruder1_temp: {'restore': False, 'temp': 0}
[gcode_macro _USER_RESUME]
[gcode_macro _USER_TEMP_RESUME]
gcode:
{% set extruder_info = [
{'index': 0, 'name': 'last_extruder_temp'},
@ -608,4 +651,121 @@ gcode:
[gcode_macro _USER_CANCEL]
gcode:
M84
G91
G1 Z30 F600 ; lift nozzle
M84
[gcode_macro RESUME]
description: Resume the actual running print
rename_existing: RESUME_BASE
variable_last_extruder_temp: {'restore': False, 'temp': 0}
variable_last_extruder1_temp: {'restore': False, 'temp': 0}
variable_restore_idle_timeout: 0
variable_idle_state: False
variable_filament_state: False
gcode:
##### get user parameters or use default #####
{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
{% set can_extrude = True if printer.toolhead.extruder == '' # no extruder defined in config
else printer[printer.toolhead.extruder].can_extrude %} # status of active extruder
{% set do_resume = False %}
{% set prompt_txt = [] %}
{% set runout = True %}
##### end of definitions #####
_FILAMENT_UPDATE
#### Printer comming from timeout idle state ####
{% if printer.idle_timeout.state|upper == "IDLE" or idle_state %}
SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=idle_state VALUE=False
{% if last_extruder_temp.restore or last_extruder1_temp.restore %}
# we need to use the unicode (\u00B0) for the ° as py2 env's would throw an error otherwise
RESPOND TYPE=echo MSG='{"Restoring \"%s\" temperature to %3.1f\u00B0C, this may take some time" % (printer.toolhead.extruder, last_extruder_temp.temp) }'
{client.user_temputer_macro|default("")}
{% set do_resume = True %}
{% elif can_extrude %}
{% set do_resume = True %}
{% else %}
RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder}'
{% set _d = prompt_txt.append("\"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder) %}
{% endif %}
#### Printer comming out of regular PAUSE state ####
{% elif can_extrude %}
{% set do_resume = True %}
{% else %}
RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder}'
{% set _d = prompt_txt.append("\"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder) %}
{% endif %}
_ACT_RESUME DO_RESUME={do_resume}
[gcode_macro _ACT_RESUME]
gcode:
##### get user parameters or use default #####
{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
{% set sp_move = client.speed_move|default(velocity) %}
{% set do_resume = true if params.DO_RESUME|default(False)|lower == 'true' else false %}
{% set filament_state = printer['gcode_macro RESUME'].filament_state|default(False) %}
{% set restore_idle_timeout = printer['gcode_macro RESUME'].restore_idle_timeout|default(0) %}
{% set prompt_txt = [] %}
{% if filament_state %}
{% if do_resume %}
{% if restore_idle_timeout > 0 %} SET_IDLE_TIMEOUT TIMEOUT={restore_idle_timeout} {% endif %} # restore idle_timeout time
{client.user_resume_macro|default("")}
_CLIENT_EXTRUDE
RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}
{% endif %}
{% else %}
RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" detects no filament, please load filament and press RESUME" % printer.toolhead.extruder}'
{% set _d = prompt_txt.append("\"%s\" detects no filament, please load filament and press RESUME" % printer.toolhead.extruder) %}
{% endif %}
##### Generate User Information box in case of abort #####
{% if not (filament_state and do_resume) %}
RESPOND TYPE=command MSG="action:prompt_begin RESUME aborted !!!"
{% for element in prompt_txt %}
RESPOND TYPE=command MSG='{"action:prompt_text %s" % element}'
{% endfor %}
RESPOND TYPE=command MSG="action:prompt_footer_button Ok|RESPOND TYPE=command MSG=action:prompt_end|info"
RESPOND TYPE=command MSG="action:prompt_show"
{% endif %}
########################################
# filament_runout
########################################
[gcode_macro _FILAMENT_UPDATE]
gcode:
{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
{% set runout_resume = True if client.filament_sensor|default("") == "" # no runout
else True if not printer[client.filament_sensor].enabled # sensor is disabled
else printer[client.filament_sensor].filament_detected %} # sensor status
{% set runout_resume1 = True if client.filament_sensor1|default("") == "" # no runout
else True if not printer[client.filament_sensor1].enabled # sensor1 is disabled
else printer[client.filament_sensor1].filament_detected %} # sensor1 status
##### filament check #####
{% if printer["dual_carriage"] is not defined %}
{% set runout = runout_resume if printer.toolhead.extruder == "extruder" else runout_resume1 %}
{% else %}
{% set current_idex_mode = printer["dual_carriage"].carriage_1|lower %}
{% if current_idex_mode == 'copy' or current_idex_mode == 'mirror' %}
{% set runout = (runout_resume == false or runout_resume1 == false) %}
{% else %}
{% set runout = runout_resume if printer.toolhead.extruder == "extruder" else runout_resume1 %}
{% endif %}
{% endif %}
SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=filament_state VALUE={ runout }
[gcode_macro _RUNOUT_HANDLE]
description: filament state update
gcode:
_FILAMENT_UPDATE
{% if printer.print_stats.state == "printing" %}
_RUNOUT_PAUSE
{% endif %}
[gcode_macro _RUNOUT_PAUSE]
gcode:
{% set filament_state = printer['gcode_macro RESUME'].filament_state|default(False) %}
{% if not filament_state %}
{% set msg_extruder = "extruder" if printer.toolhead.extruder == "extruder" else "extruder1" %}
RESPOND TYPE=echo MSG='{"Noting! \"%s\" filament has been pulled out." % msg_extruder}'
PAUSE
{% endif %}

12
config/CreatBot_D600Pro2/printer.cfg

@ -2,15 +2,15 @@
[extruder]
control = pid
pid_kp = 39.960
pid_ki = 2.537
pid_kd = 157.344
pid_kp = 21.950
pid_ki = 0.887
pid_kd = 135.815
[extruder1]
control = pid
pid_kp = 39.960
pid_ki = 2.537
pid_kd = 157.344
pid_kp = 21.950
pid_ki = 0.887
pid_kd = 135.815
[heater_bed]
control = pid

172
config/CreatBot_F430NX/base.cfg

@ -228,15 +228,15 @@ initial_GREEN: 0.3
initial_BLUE: 0.3
[filament_switch_sensor extruder]
pause_on_runout: True
runout_gcode:
pause_on_runout: False
runout_gcode: _RUNOUT_HANDLE
event_delay: 3.0
pause_delay: 0.5
switch_pin: ^PC14
[filament_switch_sensor extruder1]
pause_on_runout: True
runout_gcode:
pause_on_runout: False
runout_gcode: _RUNOUT_HANDLE
event_delay: 3.0
pause_delay: 0.5
switch_pin: ^PC15
@ -514,6 +514,10 @@ gcode:
G4 P500
SET_SERVO SERVO=probe_servo angle=135
[gcode_macro _START_PRINT_BASE]
description: Call when starting to print
gcode:
_RUNOUT_HANDLE
[gcode_macro START_PRINT]
gcode:
@ -670,6 +674,22 @@ gcode:
C28 {homing_cmd}
{% if 'X' in homing_cmd %}
_RESTORE_DEFAULT_EXTRUDER
{% endif %}
{% endif %}
[gcode_macro M109]
rename_existing: C109
gcode:
{% set hotend = "extruder" %}
{% set s = params.S|default(0)|float %}
{% set t = params.T|default(0)|int %}
{% if params.S is defined %}
{% if t != 0 %}
{% set hotend = hotend ~ t %}
{% endif %}
SET_HEATER_TEMPERATURE HEATER={hotend} TARGET={s}
{% if s != 0 %}
TEMPERATURE_WAIT SENSOR={hotend} MINIMUM={s-3} MAXIMUM={s+3}
{% endif %}
{% endif %}
@ -680,13 +700,24 @@ gcode:
SET_HEATER_TEMPERATURE HEATER=chamber target={s|int}
{% endif %}
[gcode_macro M190]
rename_existing: C190
gcode:
{% set s = params.S|default(0)|float %}
{% if params.S is defined %}
SET_HEATER_TEMPERATURE HEATER="heater_bed" TARGET={s}
{% if s != 0 %}
TEMPERATURE_WAIT SENSOR="heater_bed" MINIMUM={s-3} MAXIMUM={s+3}
{% endif %}
{% endif %}
[gcode_macro M191]
gcode:
{% set s = params.S|default(0)|float %}
{% if params.S is defined %}
M141 S{s}
{% if s != 0 %}
TEMPERATURE_WAIT SENSOR="heater_generic chamber" MINIMUM={s-2} MAXIMUM={s+2}
TEMPERATURE_WAIT SENSOR="heater_generic chamber" MINIMUM={s-3} MAXIMUM={s+3}
{% endif %}
{% endif %}
@ -697,6 +728,10 @@ gcode:
SET_STEPPER_ENABLE STEPPER=stepper_z enable=1
_RESTORE_DEFAULT_EXTRUDER
########################################
# CANCEL_PRINT/PAUSE/RESUME/
########################################
[gcode_macro _CLIENT_VARIABLE]
variable_use_custom_pos : True
variable_custom_park_x : 200.0
@ -715,8 +750,11 @@ variable_park_at_cancel_y : None
variable_use_fw_retract : False
variable_idle_timeout : 600
variable_runout_sensor : ""
variable_filament_sensor : "filament_switch_sensor extruder"
variable_filament_sensor1 : "filament_switch_sensor extruder1"
variable_user_temp_resume : "_USER_TEMP_RESUME"
variable_user_pause_macro : "_USER_PAUSE"
variable_user_resume_macro: "_USER_RESUME"
variable_user_resume_macro: ""
variable_user_cancel_macro: "_USER_CANCEL"
gcode:
# Nothing
@ -732,11 +770,7 @@ gcode:
SET_GCODE_VARIABLE MACRO=RESUME VARIABLE={name} VALUE="{{'restore': restore, 'temp': temp}}"
{% endfor %}
[gcode_macro RESUME]
variable_last_extruder_temp: {'restore': False, 'temp': 0}
variable_last_extruder1_temp: {'restore': False, 'temp': 0}
[gcode_macro _USER_RESUME]
[gcode_macro _USER_TEMP_RESUME]
gcode:
{% set extruder_info = [
{'index': 0, 'name': 'last_extruder_temp'},
@ -761,4 +795,118 @@ gcode:
[gcode_macro _USER_CANCEL]
gcode:
M84
G91
G1 Z30 F600 ; lift nozzle
M84
[gcode_macro RESUME]
description: Resume the actual running print
rename_existing: RESUME_BASE
variable_last_extruder_temp: {'restore': False, 'temp': 0}
variable_last_extruder1_temp: {'restore': False, 'temp': 0}
variable_restore_idle_timeout: 0
variable_idle_state: False
variable_filament_state: False
gcode:
##### get user parameters or use default #####
{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
{% set can_extrude = True if printer.toolhead.extruder == '' # no extruder defined in config
else printer[printer.toolhead.extruder].can_extrude %} # status of active extruder
{% set do_resume = False %}
{% set prompt_txt = [] %}
{% set runout = True %}
##### end of definitions #####
_FILAMENT_UPDATE
#### Printer comming from timeout idle state ####
{% if printer.idle_timeout.state|upper == "IDLE" or idle_state %}
SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=idle_state VALUE=False
{% if last_extruder_temp.restore or last_extruder1_temp.restore %}
# we need to use the unicode (\u00B0) for the ¡ã as py2 env's would throw an error otherwise
RESPOND TYPE=echo MSG='{"Restoring \"%s\" temperature to %3.1f\u00B0C, this may take some time" % (printer.toolhead.extruder, last_extruder_temp.temp) }'
{client.user_temputer_macro|default("")}
{% set do_resume = True %}
{% elif can_extrude %}
{% set do_resume = True %}
{% else %}
RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder}'
{% set _d = prompt_txt.append("\"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder) %}
{% endif %}
#### Printer comming out of regular PAUSE state ####
{% elif can_extrude %}
{% set do_resume = True %}
{% else %}
RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder}'
{% set _d = prompt_txt.append("\"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder) %}
{% endif %}
_ACT_RESUME DO_RESUME={do_resume}
[gcode_macro _ACT_RESUME]
gcode:
##### get user parameters or use default #####
{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
{% set sp_move = client.speed_move|default(velocity) %}
{% set do_resume = true if params.DO_RESUME|default(False)|lower == 'true' else false %}
{% set filament_state = printer['gcode_macro RESUME'].filament_state|default(False) %}
{% set restore_idle_timeout = printer['gcode_macro RESUME'].restore_idle_timeout|default(0) %}
{% set prompt_txt = [] %}
{% if filament_state %}
{% if do_resume %}
{% if restore_idle_timeout > 0 %} SET_IDLE_TIMEOUT TIMEOUT={restore_idle_timeout} {% endif %} # restore idle_timeout time
{client.user_resume_macro|default("")}
_CLIENT_EXTRUDE
RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}
{% endif %}
{% else %}
RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" detects no filament, please load filament and press RESUME" % printer.toolhead.extruder}'
{% set _d = prompt_txt.append("\"%s\" detects no filament, please load filament and press RESUME" % printer.toolhead.extruder) %}
{% endif %}
##### Generate User Information box in case of abort #####
{% if not (filament_state and do_resume) %}
RESPOND TYPE=command MSG="action:prompt_begin RESUME aborted !!!"
{% for element in prompt_txt %}
RESPOND TYPE=command MSG='{"action:prompt_text %s" % element}'
{% endfor %}
RESPOND TYPE=command MSG="action:prompt_footer_button Ok|RESPOND TYPE=command MSG=action:prompt_end|info"
RESPOND TYPE=command MSG="action:prompt_show"
{% endif %}
########################################
# filament_runout
########################################
[gcode_macro _FILAMENT_UPDATE]
gcode:
{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
{% set runout_resume = True if client.filament_sensor|default("") == "" # no runout
else True if not printer[client.filament_sensor].enabled # sensor is disabled
else printer[client.filament_sensor].filament_detected %} # sensor status
{% set runout_resume1 = True if client.filament_sensor1|default("") == "" # no runout
else True if not printer[client.filament_sensor1].enabled # sensor1 is disabled
else printer[client.filament_sensor1].filament_detected %} # sensor1 status
##### filament check #####
{% if printer["dual_carriage"] is not defined %}
{% set runout = runout_resume if printer.toolhead.extruder == "extruder" else runout_resume1 %}
{% else %}
{% set current_idex_mode = printer["dual_carriage"].carriage_1|lower %}
{% if current_idex_mode == 'copy' or current_idex_mode == 'mirror' %}
{% set runout = (runout_resume == false or runout_resume1 == false) %}
{% else %}
{% set runout = runout_resume if printer.toolhead.extruder == "extruder" else runout_resume1 %}
{% endif %}
{% endif %}
SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=filament_state VALUE={ runout }
[gcode_macro _RUNOUT_HANDLE]
description: filament state update
gcode:
_FILAMENT_UPDATE
{% if printer.print_stats.state == "printing" %}
_RUNOUT_PAUSE
{% endif %}
[gcode_macro _RUNOUT_PAUSE]
gcode:
{% set filament_state = printer['gcode_macro RESUME'].filament_state|default(False) %}
{% if not filament_state %}
{% set msg_extruder = "extruder" if printer.toolhead.extruder == "extruder" else "extruder1" %}
RESPOND TYPE=echo MSG='{"Noting! \"%s\" filament has been pulled out." % msg_extruder}'
PAUSE
{% endif %}