优化外置驱动的支持

config/CreatBot_D1000/base.cfg

@@ -358,6 +358,7 @@ z_hop_speed: 10
 gcode:
     SET_STEPPER_ENABLE STEPPER=stepper_x ENABLE=1
     SET_STEPPER_ENABLE STEPPER=stepper_y ENABLE=1
+    SET_STEPPER_ENABLE STEPPER=stepper_z ENABLE=1
     SET_KINEMATIC_POSITION X=500 Y=500 Z=0
 
 [gcode_macro T0]
@@ -555,6 +556,7 @@ gcode:
     {% if not homing_cmd %}
         SET_STEPPER_ENABLE STEPPER=stepper_x ENABLE=1
         SET_STEPPER_ENABLE STEPPER=stepper_y ENABLE=1
+	    SET_STEPPER_ENABLE STEPPER=stepper_z ENABLE=1
         G4 P300
         C28
         _ACTIVATE_DEFAULT_EXTRUDER
@@ -949,6 +951,8 @@ gcode:
     {% if hotend == "extruder1" %}
         {% set z_offset_total = z_offset_total +  z_offset %}
     {% endif %}
+    SET_STEPPER_ENABLE STEPPER=stepper_z ENABLE=1
+    G4 P300
     M118 Recovery in progress, please wait
     RUN_SHELL_COMMAND CMD=_POWER_LOSS_RECOVERY PARAMS="{z_height} \"{last_file}\" \"{z_offset_total}\""
     SDCARD_PRINT_FILE FILENAME=.plr/"{last_file}"

config/CreatBot_D1000_V0/base.cfg

@@ -294,6 +294,7 @@ z_hop_speed: 10
 gcode:
     SET_STEPPER_ENABLE STEPPER=stepper_x ENABLE=1
     SET_STEPPER_ENABLE STEPPER=stepper_y ENABLE=1
+    SET_STEPPER_ENABLE STEPPER=stepper_z ENABLE=1
     SET_KINEMATIC_POSITION X=500 Y=500 Z=0
 
 [gcode_macro T0]
@@ -885,6 +886,8 @@ gcode:
     {% if hotend == "extruder1" %}
         {% set z_offset_total = z_offset_total +  z_offset %}
     {% endif %}
+    SET_STEPPER_ENABLE STEPPER=stepper_z ENABLE=1
+    G4 P300
     M118 Recovery in progress, please wait
     RUN_SHELL_COMMAND CMD=_POWER_LOSS_RECOVERY PARAMS="{z_height} \"{last_file}\" \"{z_offset_total}\""
     SDCARD_PRINT_FILE FILENAME=.plr/"{last_file}"

config/CreatBot_D600Pro2/base.cfg

@@ -358,6 +358,7 @@ z_hop_speed: 10
 gcode:
     SET_STEPPER_ENABLE STEPPER=stepper_x ENABLE=1
     SET_STEPPER_ENABLE STEPPER=stepper_y ENABLE=1
+    SET_STEPPER_ENABLE STEPPER=stepper_z ENABLE=1
     SET_KINEMATIC_POSITION X=300 Y=300 Z=0
 
 [gcode_macro T0]
@@ -660,7 +661,7 @@ gcode:
     {% set toolchange = client.change_runout|lower|default("") %}
     {% set extruder_filament = client.filament_state.extruder %}
     {% set extruder1_filament = client.filament_state.extruder1 %}
-    {% set resume_extruder = client.resume_extruder %}
+    {% set resume_extruder = client.resume_extruder|default("extruder") %}
 
     {% if autoshift_on == 'true' %}
         {% if extruder_filament and extruder1_filament %}
@@ -772,7 +773,6 @@ gcode:
     {% set autoshift = printer.save_variables.variables.auto_change_nozzle|default(False) %}
     {% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
     {% set do_resume = False %}
-    {% set prompt_txt = [] %}
     {% set runout = True %}
     ##### end of definitions #####
     _FILAMENT_UPDATE
@@ -944,6 +944,8 @@ gcode:
     {% if hotend == "extruder1" %}
         {% set z_offset_total = z_offset_total +  z_offset %}
     {% endif %}
+    SET_STEPPER_ENABLE STEPPER=stepper_z ENABLE=1
+    G4 P300
     M118 Recovery in progress, please wait
     RUN_SHELL_COMMAND CMD=_POWER_LOSS_RECOVERY PARAMS="{z_height} \"{last_file}\" \"{z_offset_total}\""
     SDCARD_PRINT_FILE FILENAME=.plr/"{last_file}"

config/CreatBot_D600Pro2_V0/base.cfg

@@ -295,6 +295,7 @@ z_hop_speed: 10
 gcode:
     SET_STEPPER_ENABLE STEPPER=stepper_x ENABLE=1
     SET_STEPPER_ENABLE STEPPER=stepper_y ENABLE=1
+    SET_STEPPER_ENABLE STEPPER=stepper_z ENABLE=1
     SET_KINEMATIC_POSITION X=300 Y=300 Z=0
 
 [gcode_macro T0]
@@ -709,7 +710,6 @@ gcode:
     {% set autoshift = printer.save_variables.variables.auto_change_nozzle|default(False) %}
     {% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
     {% set do_resume = False %}
-    {% set prompt_txt = [] %}
     {% set runout = True %}
     ##### end of definitions #####
     _FILAMENT_UPDATE
@@ -881,6 +881,8 @@ gcode:
     {% if hotend == "extruder1" %}
         {% set z_offset_total = z_offset_total +  z_offset %}
     {% endif %}
+    SET_STEPPER_ENABLE STEPPER=stepper_z ENABLE=1
+    G4 P300
     M118 Recovery in progress, please wait
     RUN_SHELL_COMMAND CMD=_POWER_LOSS_RECOVERY PARAMS="{z_height} \"{last_file}\" \"{z_offset_total}\""
     SDCARD_PRINT_FILE FILENAME=.plr/"{last_file}"

config/CreatBot_F430NX/base.cfg

@@ -419,6 +419,7 @@ z_hop:5
 gcode:
     SET_STEPPER_ENABLE STEPPER=stepper_x ENABLE=1
     SET_STEPPER_ENABLE STEPPER=stepper_y ENABLE=1
+    SET_STEPPER_ENABLE STEPPER=stepper_z ENABLE=1
     SET_KINEMATIC_POSITION X=200 Y=150 Z=0
 
 [gcode_macro _RESTORE_DEFAULT_EXTRUDER]
@@ -1167,6 +1168,8 @@ gcode:
     {% if hotend == "extruder1" %}
         {% set z_offset_total = z_offset_total +  z_offset %}
     {% endif %}
+    SET_STEPPER_ENABLE STEPPER=stepper_z ENABLE=1
+    G4 P300
     M118 Recovery in progress, please wait
     RUN_SHELL_COMMAND CMD=_POWER_LOSS_RECOVERY PARAMS="{z_height} \"{last_file}\" \"{z_offset_total}\""
     SDCARD_PRINT_FILE FILENAME=.plr/"{last_file}"