diff --git a/config/CreatBot_D1000/base.cfg b/config/CreatBot_D1000/base.cfg
index 280854dba..ec286573c 100644
--- a/config/CreatBot_D1000/base.cfg
+++ b/config/CreatBot_D1000/base.cfg
@@ -352,11 +352,11 @@ speed:100
 z_hop:5
 z_hop_speed: 10
 
-[gcode_macro ENABLE_FORCE_MOVE]
+[gcode_macro ENABLE_MOTOR]
 gcode:
     SET_STEPPER_ENABLE STEPPER=stepper_x ENABLE=1
     SET_STEPPER_ENABLE STEPPER=stepper_y ENABLE=1
-    SET_KINEMATIC_POSITION X=500 Y=500 Z=500
+    SET_KINEMATIC_POSITION X=500 Y=500 Z=0
 
 [gcode_macro T0]
 gcode:
diff --git a/config/CreatBot_D600Pro2/base.cfg b/config/CreatBot_D600Pro2/base.cfg
index e3e9b5f69..ce7ae564c 100644
--- a/config/CreatBot_D600Pro2/base.cfg
+++ b/config/CreatBot_D600Pro2/base.cfg
@@ -352,11 +352,11 @@ speed:100
 z_hop:5
 z_hop_speed: 10
 
-[gcode_macro ENABLE_FORCE_MOVE]
+[gcode_macro ENABLE_MOTOR]
 gcode:
     SET_STEPPER_ENABLE STEPPER=stepper_x ENABLE=1
     SET_STEPPER_ENABLE STEPPER=stepper_y ENABLE=1
-    SET_KINEMATIC_POSITION X=300 Y=300 Z=300
+    SET_KINEMATIC_POSITION X=300 Y=300 Z=0
 
 [gcode_macro T0]
 gcode:
diff --git a/config/CreatBot_F430NX/base.cfg b/config/CreatBot_F430NX/base.cfg
index fec89fdd4..07829f52f 100644
--- a/config/CreatBot_F430NX/base.cfg
+++ b/config/CreatBot_F430NX/base.cfg
@@ -414,9 +414,11 @@ home_xy_position:200,150
 speed:150
 z_hop:5
 
-[gcode_macro ENABLE_FORCE_MOVE]
+[gcode_macro ENABLE_MOTOR]
 gcode:
-    SET_KINEMATIC_POSITION X=200 Y=150 Z=150
+    SET_STEPPER_ENABLE STEPPER=stepper_x ENABLE=1
+    SET_STEPPER_ENABLE STEPPER=stepper_y ENABLE=1
+    SET_KINEMATIC_POSITION X=200 Y=150 Z=0
 
 [gcode_macro _RESTORE_DEFAULT_EXTRUDER]
 gcode:
@@ -620,10 +622,6 @@ gcode:
     {% set dual_z_offset=params.S|default(0)|float %}
     SAVE_VARIABLE VARIABLE=dual_z_offset VALUE={dual_z_offset}
 
-[gcode_macro ENABLE_FORCE_MOVE]
-gcode:
-    SET_KINEMATIC_POSITION X=200 Y=150 Z=150
-
 [gcode_macro LOAD_FILAMENT]
 variable_load_distance:  90
 variable_purge_distance:  20