diff --git a/config/generic-bigtreetech-skr-e3-turbo.cfg b/config/generic-bigtreetech-skr-e3-turbo.cfg
new file mode 100644
index 000000000..3dfeaf367
--- /dev/null
+++ b/config/generic-bigtreetech-skr-e3-turbo.cfg
@@ -0,0 +1,134 @@
+# This file contains common pin mappings for the BIGTREETECH SKR E3
+# Turbo. To use this config, the firmware should be compiled for the
+# LPC1769.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: P1.4
+dir_pin: !P1.8
+enable_pin: !P1.0
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^P1.29
+position_endstop: 0
+position_max: 235
+homing_speed: 50
+
+[tmc2209 stepper_x]
+uart_pin: P1.1
+#diag_pin: P1.29
+run_current: 0.580
+hold_current: 0.500
+stealthchop_threshold: 99999
+
+[stepper_y]
+step_pin: P1.14
+dir_pin: !P1.15
+enable_pin: !P1.9
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^P1.28
+position_endstop: 0
+position_max: 235
+homing_speed: 50
+
+[tmc2209 stepper_y]
+uart_pin: P1.10
+#diag_pin: P1.28
+run_current: 0.580
+hold_current: 0.500
+stealthchop_threshold: 99999
+
+[stepper_z]
+step_pin: P4.29
+dir_pin: P4.28
+enable_pin: !P1.16
+microsteps: 16
+rotation_distance: 8
+endstop_pin: ^P1.27
+position_endstop: 0.0
+position_max: 250
+
+[tmc2209 stepper_z]
+uart_pin: P1.17
+#diag_pin: P1.27
+run_current: 0.580
+hold_current: 0.500
+stealthchop_threshold: 99999
+
+[extruder]
+step_pin: P2.6
+dir_pin: !P2.7
+enable_pin: !P0.4
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: P2.3
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: P0.24
+control: pid
+pid_Kp: 21.527
+pid_Ki: 1.063
+pid_Kd: 108.982
+min_temp: 0
+max_temp: 250
+
+[tmc2209 extruder]
+uart_pin: P0.5
+#diag_pin: P1.26
+run_current: 0.650
+hold_current: 0.500
+stealthchop_threshold: 99999
+
+#[extruder1]
+#step_pin: P2.11
+#dir_pin: P2.12
+#enable_pin: !P0.21
+#heater_pin: P2.4
+#sensor_pin: P0.23
+#...
+
+#[tmc2209 extruder1]
+#uart_pin: P0.22
+##diag_pin: P1.25
+#...
+
+[heater_bed]
+heater_pin: P2.5
+sensor_type: ATC Semitec 104GT-2
+sensor_pin: P0.25
+control: pid
+pid_Kp: 54.027
+pid_Ki: 0.770
+pid_Kd: 948.182
+min_temp: 0
+max_temp: 130
+
+[fan]
+pin: P2.1
+
+[heater_fan nozzle_cooling_fan]
+pin: P2.2
+
+[mcu]
+serial: /dev/serial/by-id/usb-Klipper_lpc1769_00000000000000000000000000000000-if00
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100
+
+[static_digital_output tmc_standby_pins]
+pins: !P3.26, !P3.25, !P1.18, !P1.19, !P2.13
+
+[board_pins]
+aliases:
+    # EXP1 header
+    EXP1_1=P2.8,  EXP1_3=P0.19, EXP1_5=P0.20, EXP1_7=P0.17, EXP1_9=<GND>,
+    EXP1_2=P0.16, EXP1_4=<RST>, EXP1_6=P0.15, EXP1_8=P0.18, EXP1_10=<5V>
+
+# See the sample-lcd.cfg file for definitions of common LCD displays.
diff --git a/test/klippy/printers.test b/test/klippy/printers.test
index 85219af8c..6e687835f 100644
--- a/test/klippy/printers.test
+++ b/test/klippy/printers.test
@@ -101,6 +101,7 @@ CONFIG ../../config/generic-duet2-duex.cfg
 # Printers using the lpc176x
 DICTIONARY lpc176x.dict
 CONFIG ../../config/generic-azteeg-x5-mini-v3.cfg
+CONFIG ../../config/generic-bigtreetech-skr-e3-turbo.cfg
 CONFIG ../../config/generic-bigtreetech-skr-v1.1.cfg
 CONFIG ../../config/generic-bigtreetech-skr-v1.3.cfg
 CONFIG ../../config/generic-bigtreetech-skr-v1.4.cfg