From f8a28401c044575c68e9b4de372d171628bcf80f Mon Sep 17 00:00:00 2001 From: Kevin O'Connor <kevin@koconnor.net> Date: Mon, 9 Apr 2018 12:02:23 -0400 Subject: [PATCH] config: Update indentation of display section in example-extras.cfg Use the same indentation as the other sections. Signed-off-by: Kevin O'Connor <kevin@koconnor.net> --- config/example-extras.cfg | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-) diff --git a/config/example-extras.cfg b/config/example-extras.cfg index 38076f6ee..a28654f79 100644 --- a/config/example-extras.cfg +++ b/config/example-extras.cfg @@ -375,24 +375,23 @@ # Support for a display attached to the micro-controller. #[display] #lcd_type: -# The type of LCD chip in use. This may be either "hd44780" (which -# is used in "RepRapDiscount 2004 Smart Controller" type displays) -# or "st7920" (which is used in "RepRapDiscount 12864 Full Graphic -# Smart Controller" type displays). This parameter must be -# provided. +# The type of LCD chip in use. This may be either "hd44780" (which +# is used in "RepRapDiscount 2004 Smart Controller" type displays) +# or "st7920" (which is used in "RepRapDiscount 12864 Full Graphic +# Smart Controller" type displays). This parameter must be provided. #rs_pin: #e_pin: #d4_pin: #d5_pin: #d6_pin: #d7_pin: -# The pins connected to an hd44780 type lcd. These parameters must -# be provided when using an hd44780 display. +# The pins connected to an hd44780 type lcd. These parameters must +# be provided when using an hd44780 display. #cs_pin: #sclk_pin: #sid_pin: -# The pins connected to an st7920 type lcd. These parameters must -# be provided when using an st7920 display. +# The pins connected to an st7920 type lcd. These parameters must be +# provided when using an st7920 display. # Replicape support - see the generic-replicape.cfg file for further