[include base.cfg]

[extruder]
control = pid
pid_kp = 26.414
pid_ki = 1.334
pid_kd = 130.750

[extruder1]
control = pid
pid_kp = 26.414
pid_ki = 1.334
pid_kd = 130.750

[heater_bed]
control = pid
pid_kp = 52.123
pid_ki = 0.922
pid_kd = 736.891

[heater_generic chamber]
control: pid
pid_kp: 214.568
pid_ki: 8.115
pid_kd: 0

[probe]
z_offset: 4

#*# <---------------------- SAVE_CONFIG ---------------------->
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
#*#
#*# [input_shaper]
#*# shaper_type_x = mzv
#*# shaper_freq_x = 31.2
#*# shaper_type_y = ei
#*# shaper_freq_y = 29.6