CreatBotKlipper

History

Kevin O'Connor 1bdebeaebf docs: Add an initial configuration checklist document

Provide a document with basic steps that a user can run to verify that
the pins in the configuration file are set correctly.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

2017-12-26 20:54:37 -05:00

img

docs: Add an initial configuration checklist document

2017-12-26 20:54:37 -05:00

prints

docs: Update square test print to contain notches on inside of square

2017-12-17 12:18:25 -05:00

beaglebone.md

docs: Point to beaglebone.md from the main installation document

2017-10-11 21:03:13 -04:00

Code_Overview.md

docs: Add a section on time handling to Code_Overview.md

2017-09-27 15:11:15 -04:00

Config_checks.md

docs: Add an initial configuration checklist document

2017-12-26 20:54:37 -05:00

Contact.md

docs: Offer alternatives to ssh/scp/sftp

2017-12-21 17:34:35 -05:00

CONTRIBUTING.md

docs: Add a CONTRIBUTING document

2017-12-24 12:33:01 -05:00

Debugging.md

avr: Add SIMULAVR build option; don't show WATCHDOG or SERIAL_BAUD_U2X

2017-05-28 11:04:59 -04:00

developer-certificate-of-origin

docs: Add a CONTRIBUTING document

2017-12-24 12:33:01 -05:00

FAQ.md

docs: Add FAQ item on AVR watchdog restart failures

2017-12-11 18:17:14 -05:00

Features.md

docs: Reword performance paragraph in Features.md

2017-09-27 13:59:47 -04:00

Installation.md

docs: Add an initial configuration checklist document

2017-12-26 20:54:37 -05:00

Kinematics.md

toolhead: Permit look-ahead between Z moves

2017-09-03 15:46:48 -04:00

MCU_Commands.md

gpiocmds: Allow the start value for a pin to differ from the default_value

2017-10-12 11:59:27 -04:00

Overview.md

docs: Add an initial configuration checklist document

2017-12-26 20:54:37 -05:00

Pressure_Advance.md

…

Protocol.md

…

README.md

…

Releases.md

docs: Note version 0.5.0 release

2017-10-25 11:27:20 -04:00

Todo.md

docs: Remove items from Todo.md

2017-10-01 19:34:00 -04:00

README.md

Welcome to the Klipper documentation. The overview document is a good starting point.