CreatBotKlipper

History

Kevin O'Connor f1222565b8 docs: Update Debugging.md with information on logextract

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

2018-01-11 13:48:40 -05:00

img

docs: Add an initial configuration checklist document

2017-12-26 20:54:37 -05:00

prints

docs: Minor update to square.scad

2018-01-02 21:56:29 -05:00

beaglebone.md

…

Code_Overview.md

…

Config_checks.md

docs: Add an initial configuration checklist document

2017-12-26 20:54:37 -05:00

Contact.md

docs: Offer alternatives to ssh/scp/sftp

2017-12-21 17:34:35 -05:00

CONTRIBUTING.md

docs: Add a CONTRIBUTING document

2017-12-24 12:33:01 -05:00

Debugging.md

docs: Update Debugging.md with information on logextract

2018-01-11 13:48:40 -05:00

developer-certificate-of-origin

docs: Add a CONTRIBUTING document

2017-12-24 12:33:01 -05:00

FAQ.md

docs: Add a table of contents to the FAQ

2018-01-05 11:42:00 -05:00

Features.md

…

Installation.md

docs: Update installation document with pointers to FAQ

2018-01-04 13:29:17 -05:00

Kinematics.md

…

MCU_Commands.md

gpiocmds: Allow the start value for a pin to differ from the default_value

2017-10-12 11:59:27 -04:00

Overview.md

docs: Add an initial configuration checklist document

2017-12-26 20:54:37 -05:00

Pressure_Advance.md

docs: Note pressure_advance over 0.20 is unlikely to improve quality

2018-01-08 11:07:26 -05:00

Protocol.md

…

README.md

…

Releases.md

docs: Note version 0.5.0 release

2017-10-25 11:27:20 -04:00

Todo.md

stepper: Automatically detect and handle shared stepper enable lines

2018-01-10 19:10:26 -05:00

README.md

Welcome to the Klipper documentation. The overview document is a good starting point.