Kevin O'Connor 167b18b58f gcode: Ignore M21 command ...

No need to recommend users disable "SD card support" in octoprint -
instead, just ignore the M21 command.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

2017-04-20 10:11:10 -04:00

..

img

docs: Reword parts of the pressure advance kinematics description.

2017-04-19 20:48:23 -04:00

prints

docs: Add initial Pressure Advance tuning document

2017-04-19 16:02:11 -04:00

Code_Overview.md

docs: Add initial Kinematics document

2017-04-15 22:26:03 -04:00

Debugging.md

docs: Add documentation on how to run the graphstats.py script

2017-04-11 13:41:11 -04:00

Features.md

docs: Updates to Features document

2017-04-15 22:52:36 -04:00

Firmware_Commands.md

docs: Update Firmware_Commands with recent end stop changes

2017-04-11 12:36:29 -04:00

Installation.md

gcode: Ignore M21 command

2017-04-20 10:11:10 -04:00

Kinematics.md

docs: Reword parts of the pressure advance kinematics description.

2017-04-19 20:48:23 -04:00

Overview.md

docs: Add initial Pressure Advance tuning document

2017-04-19 16:02:11 -04:00

Pressure_Advance.md

docs: Add initial Pressure Advance tuning document

2017-04-19 16:02:11 -04:00

Protocol.md

command: Check for reentrant calls to sendf()

2017-01-13 12:10:00 -05:00

Releases.md

docs: Note version 0.3.0 release

2016-12-23 19:10:09 -05:00

Todo.md

docs: Update Todo - initial kinematic document written

2017-04-15 22:59:34 -04:00