CreatBot/CreatBotKlipper
CreatBot/CreatBotKlipper
7
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
CreatBotKlipper/config
History
Manuel Fichtner 5d52a3b19f
config: Anycubic Vyper (#4740) 
This commit contains a configuration for the Anycubic Vyper printer from 2021.
It uses a clone of the STM32F103 chip named GD32F103.
There are 2 Mainboard versions out there v0.0.5 and v0.0.6, this config has
been tested with the v0.0.6 only. It should probably work for v0.0.5 as well
since there are no different changes in the Anycubic Marlin firmware.
The LCD is not supported yet (might work, but didn't try yet).

Signed-off-by: Marc Neuhaus <marc@neuhaus.nrw>
Signed-off-by: Manuel Fichtner <manuel.fichtner@me.com>
2021-10-11 16:26:14 -04:00
..
example-cartesian.cfg
config: Don't use arduino aliases in example-xxx.cfg files
2021-03-25 10:49:17 -04:00
example-corexy.cfg
config: Don't use arduino aliases in example-xxx.cfg files
2021-03-25 10:49:17 -04:00
example-corexz.cfg
config: Don't use arduino aliases in example-xxx.cfg files
2021-03-25 10:49:17 -04:00
example-delta.cfg
config: Don't use arduino aliases in example-xxx.cfg files
2021-03-25 10:49:17 -04:00
example-extras.cfg
config: Add dummy example.cfg and example-extras.cfg files
2020-11-28 12:09:03 -05:00
example-hybrid-corexy.cfg
kinematics: Add hybrid-corexy and hybrid-corexz (#4229)
2021-05-03 14:31:23 -04:00
example-hybrid-corexz.cfg
kinematics: Add hybrid-corexy and hybrid-corexz (#4229)
2021-05-03 14:31:23 -04:00
example-polar.cfg
config: Don't use arduino aliases in example-xxx.cfg files
2021-03-25 10:49:17 -04:00
example-rotary-delta.cfg
config: Don't use arduino aliases in example-xxx.cfg files
2021-03-25 10:49:17 -04:00
example-winch.cfg
config: Don't use arduino aliases in example-xxx.cfg files
2021-03-25 10:49:17 -04:00
example.cfg
config: Add dummy example.cfg and example-extras.cfg files
2020-11-28 12:09:03 -05:00
generic-archim2.cfg
config: Update example configs to use rotation_distance
2020-12-18 10:38:49 -05:00
generic-azteeg-x5-mini-v3.cfg
config: Update example configs to use rotation_distance
2020-12-18 10:38:49 -05:00
generic-bigtreetech-e3-rrf-v1.1.cfg
config: Adds generic config for BigTreeTech SKR E3 RRF 1.1
2021-08-17 14:48:34 -04:00
generic-bigtreetech-gtr.cfg
config: Use "stealthchop_threshold: 999999" if set
2021-05-09 09:02:43 -04:00
generic-bigtreetech-octopus.cfg
config: Fix EXP2_10 alias in generic-bigtreetech-octopus.cfg
2021-09-21 13:42:52 -04:00
generic-bigtreetech-skr-2.cfg
config: Document motor_power pin in skr2 config (#4677)
2021-09-15 18:58:30 -04:00
generic-bigtreetech-skr-cr6-v1.0.cfg
config: Add generic-bigtreetech-skr-cr6-v1.0.cfg and fixes
2021-06-14 20:48:55 -04:00
generic-bigtreetech-skr-e3-dip.cfg
config: Use "stealthchop_threshold: 999999" if set
2021-05-09 09:02:43 -04:00
generic-bigtreetech-skr-e3-turbo.cfg
config: Use "stealthchop_threshold: 999999" if set
2021-05-09 09:02:43 -04:00
generic-bigtreetech-skr-mini-e3-v1.0.cfg
config: Use "stealthchop_threshold: 999999" if set
2021-05-09 09:02:43 -04:00
generic-bigtreetech-skr-mini-e3-v1.2.cfg
config: Use "stealthchop_threshold: 999999" if set
2021-05-09 09:02:43 -04:00
generic-bigtreetech-skr-mini-e3-v2.0.cfg
config: Minor indentation changes to skr configs
2021-06-01 11:28:07 -04:00
generic-bigtreetech-skr-mini-mz.cfg
config: Minor indentation changes to skr configs
2021-06-01 11:28:07 -04:00
generic-bigtreetech-skr-mini.cfg
stm32: Simplify USB/Serial/CANbus Kconfig selection
2021-03-18 13:33:33 -04:00
generic-bigtreetech-skr-pro.cfg
config: Use "stealthchop_threshold: 999999" if set
2021-05-09 09:02:43 -04:00
generic-bigtreetech-skr-v1.1.cfg
config: Update example configs to use rotation_distance
2020-12-18 10:38:49 -05:00
generic-bigtreetech-skr-v1.3.cfg
config: Use "stealthchop_threshold: 999999" if set
2021-05-09 09:02:43 -04:00
generic-bigtreetech-skr-v1.4.cfg
config: Use "stealthchop_threshold: 999999" if set
2021-05-09 09:02:43 -04:00
generic-cramps.cfg
config: Do not use beagleboard aliases in example config files
2021-03-25 10:49:17 -04:00
generic-creality-v4.2.7.cfg
config: Fix missing trailing commas in board_pins config sections
2021-08-19 17:10:54 -04:00
generic-creality-v4.2.10.cfg
config: Minor changes to printer-creality-cr30-2021.cfg
2021-05-06 11:08:57 -04:00
generic-duet2-duex.cfg
config: Update example configs to use rotation_distance
2020-12-18 10:38:49 -05:00
generic-duet2-maestro.cfg
config: Use "stealthchop_threshold: 999999" if set
2021-05-09 09:02:43 -04:00
generic-duet2.cfg
config: Update example configs to use rotation_distance
2020-12-18 10:38:49 -05:00
generic-duet3-mini.cfg
config: Fix spi bus comment in generic-duet3-mini.cfg
2021-09-26 13:44:45 -04:00
generic-einsy-rambo.cfg
config: Warn about prusa einsy boards in generic-einsy-rambo.cfg
2021-01-20 10:52:23 -05:00
generic-flyboard.cfg
config: Use "stealthchop_threshold: 999999" if set
2021-05-09 09:02:43 -04:00
generic-fysetc-cheetah-v1.1.cfg
config: Use "stealthchop_threshold: 999999" if set
2021-05-09 09:02:43 -04:00
generic-fysetc-cheetah-v1.2.cfg
config: Update generic-fysetc-cheetah-v1.2.cfg (#4315)
2021-05-25 13:31:03 -04:00
generic-fysetc-f6.cfg
config: Use "stealthchop_threshold: 999999" if set
2021-05-09 09:02:43 -04:00
generic-fysetc-s6-v2.cfg
config: Use "stealthchop_threshold: 999999" if set
2021-05-09 09:02:43 -04:00
generic-fysetc-s6.cfg
config: Use "stealthchop_threshold: 999999" if set
2021-05-09 09:02:43 -04:00
generic-fysetc-spider.cfg
config: Use "stealthchop_threshold: 999999" if set
2021-05-09 09:02:43 -04:00
generic-gt2560.cfg
config: Don't use arduino mega aliases in example config files
2021-03-25 10:49:17 -04:00
generic-mellow-super-infinty-hv.cfg
config: Added the Mellow Super Infinity HV board (#4691)
2021-09-21 14:06:15 -04:00
generic-melzi.cfg
config: Update example configs to use rotation_distance
2020-12-18 10:38:49 -05:00
generic-mightyboard.cfg
pca9533: RGB support for the mightyboard (#4150)
2021-04-09 17:47:16 -04:00
generic-mini-rambo.cfg
config: Update example configs to use rotation_distance
2020-12-18 10:38:49 -05:00
generic-minitronics1.cfg
config: Update example configs to use rotation_distance
2020-12-18 10:38:49 -05:00
generic-mks-robin-e3.cfg
config: Fix missing trailing commas in board_pins config sections
2021-08-19 17:10:54 -04:00
generic-mks-robin-nano-v1.cfg
stm32: Simplify USB/Serial/CANbus Kconfig selection
2021-03-18 13:33:33 -04:00
generic-mks-robin-nano-v2.cfg
config: Fix extruder1 step_pin in Robin Nano V2 example (#4098)
2021-03-23 10:52:10 -04:00
generic-mks-robin-nano-v3.cfg
config: fan pin number correction for Robin Nano 3 (#4005)
2021-02-28 16:17:21 -05:00
generic-mks-rumba32-v1.0.cfg
config: Add generic-mks-rumba32-v1.0.cfg to tests
2021-02-11 18:23:42 -05:00
generic-mks-sgenl.cfg
config: Use "stealthchop_threshold: 999999" if set
2021-05-09 09:02:43 -04:00
generic-printrboard-g2.cfg
config: Update example configs to use rotation_distance
2020-12-18 10:38:49 -05:00
generic-printrboard.cfg
config: Update example configs to use rotation_distance
2020-12-18 10:38:49 -05:00
generic-prusa-buddy.cfg
config: Rename generic-buddy.cfg to generic-prusa-buddy.cfg
2021-06-14 12:40:36 -04:00
generic-radds.cfg
config: Don't use arduino due aliases in example config files
2021-03-25 10:49:17 -04:00
generic-rambo.cfg
config: Update example configs to use rotation_distance
2020-12-18 10:38:49 -05:00
generic-ramps.cfg
config: Don't use arduino mega aliases in example config files
2021-03-25 10:49:17 -04:00
generic-re-arm.cfg
config: Update example configs to use rotation_distance
2020-12-18 10:38:49 -05:00
generic-replicape.cfg
config: Fix missing trailing commas in board_pins config sections
2021-08-19 17:10:54 -04:00
generic-rumba.cfg
config: Don't use arduino mega aliases in example config files
2021-03-25 10:49:17 -04:00
generic-ruramps-v1.3.cfg
config: Add generic-ruramps-v1.3.cfg to test cases and minor updates
2021-05-12 10:25:41 -04:00
generic-simulavr.cfg
config: Don't use sanguino aliases in example config files
2021-03-25 10:49:17 -04:00
generic-smoothieboard.cfg
config: Update example configs to use rotation_distance
2020-12-18 10:38:49 -05:00
generic-th3d-ezboard-lite-v1.2.cfg
config: Fixes for generic-th3d-ezboard-lite-v1.2.cfg
2021-06-08 21:29:52 -04:00
generic-ultimaker-ultimainboard-v2.cfg
config: Change current scale on generic-ultimaker-ultimainboard-v2.cfg
2021-05-28 18:56:33 -04:00
kit-voron2-250mm.cfg
config: Remove URLs to github repository
2021-09-23 19:45:22 -04:00
kit-zav3d-2019.cfg
config: Don't use arduino mega aliases in example config files
2021-03-25 10:49:17 -04:00
printer-adimlab-2018.cfg
config: Don't use arduino mega aliases in example config files
2021-03-25 10:49:17 -04:00
printer-alfawise-u30-2018.cfg
stm32: Simplify USB/Serial/CANbus Kconfig selection
2021-03-18 13:33:33 -04:00
printer-anet-a4-2018.cfg
config: Update example configs to use rotation_distance
2020-12-18 10:38:49 -05:00
printer-anet-a8-2017.cfg
config: Update example configs to use rotation_distance
2020-12-18 10:38:49 -05:00
printer-anet-e10-2018.cfg
config: Update example configs to use rotation_distance
2020-12-18 10:38:49 -05:00
printer-anet-e16-2019.cfg
config: Update example configs to use rotation_distance
2020-12-18 10:38:49 -05:00
printer-anycubic-4max-2018.cfg
config: Don't use arduino mega aliases in example config files
2021-03-25 10:49:17 -04:00
printer-anycubic-4maxpro-2.0-2021.cfg
config: Config for Anycubic 4MaxPro_2.0-2021 (#4557)
2021-09-21 12:56:30 -04:00
printer-anycubic-i3-mega-2017.cfg
config: Don't use arduino mega aliases in example config files
2021-03-25 10:49:17 -04:00
printer-anycubic-kossel-2016.cfg
config: Don't use arduino mega aliases in example config files
2021-03-25 10:49:17 -04:00
printer-anycubic-kossel-plus-2017.cfg
config: Don't use arduino mega aliases in example config files
2021-03-25 10:49:17 -04:00
printer-anycubic-vyper-2021.cfg
config: Anycubic Vyper (#4740)
2021-10-11 16:26:14 -04:00
printer-creality-cr6se-2020.cfg
stm32: Simplify USB/Serial/CANbus Kconfig selection
2021-03-18 13:33:33 -04:00
printer-creality-cr6se-2021.cfg
config: Added Config For Creality CR6 SE With Board Revision 4.5.3 (#4147)
2021-04-22 21:13:54 -04:00
printer-creality-cr10-2017.cfg
config: Update example configs to use rotation_distance
2020-12-18 10:38:49 -05:00
printer-creality-cr10mini-2017.cfg
config: Update example configs to use rotation_distance
2020-12-18 10:38:49 -05:00
printer-creality-cr10s-2017.cfg
config: Don't use arduino mega aliases in example config files
2021-03-25 10:49:17 -04:00
printer-creality-cr20-2018.cfg
config: Update example configs to use rotation_distance
2020-12-18 10:38:49 -05:00
printer-creality-cr20-pro-2019.cfg
config: Update example configs to use rotation_distance
2020-12-18 10:38:49 -05:00
printer-creality-cr30-2021.cfg
config: Minor changes to printer-creality-cr30-2021.cfg
2021-05-06 11:08:57 -04:00
printer-creality-ender2-2017.cfg
config: Update example configs to use rotation_distance
2020-12-18 10:38:49 -05:00
printer-creality-ender3-2018.cfg
config: Update example configs to use rotation_distance
2020-12-18 10:38:49 -05:00
printer-creality-ender3-v2-2020.cfg
stm32: Simplify USB/Serial/CANbus Kconfig selection
2021-03-18 13:33:33 -04:00
printer-creality-ender3max-2021.cfg
config: Remove URLs to github repository
2021-09-23 19:45:22 -04:00
printer-creality-ender3pro-2020.cfg
stm32: Simplify USB/Serial/CANbus Kconfig selection
2021-03-18 13:33:33 -04:00
printer-creality-ender5-2019.cfg
config: Update example configs to use rotation_distance
2020-12-18 10:38:49 -05:00
printer-creality-ender5plus-2019.cfg
config: Ender5Plus add filament sensor (#4031)
2021-03-14 22:04:45 -04:00
printer-creality-ender6-2020.cfg
stm32: Simplify USB/Serial/CANbus Kconfig selection
2021-03-18 13:33:33 -04:00
printer-creality-sermoonD1-2021.cfg
config: add support for creality sermoon D1 printer (#4621)
2021-09-25 12:17:02 -04:00
printer-elegoo-neptune2-v1.2-2021.cfg
test: Add printer-elegoo-neptune2-v1.2-2021.cfg to printers.test
2021-08-31 13:12:15 -04:00
printer-eryone-er20-2021.cfg
config: New printer profile for Eryone ER20 and minor update for Eryone Thinker Series (#4491)
2021-07-15 14:11:55 -04:00
printer-eryone-thinker-series-v2-2020.cfg
config: Minor Eryone Thinker S config fixes. (#4695)
2021-09-21 14:12:58 -04:00
printer-flashforge-creator-pro-2018.cfg
config: Add printer-flashforge-creator-pro-2018.cfg to test cases
2021-04-16 13:58:24 -04:00
printer-flsun-q5-2020.cfg
config: Update printer-flsun-q5-2020.cfg (#4488)
2021-07-20 11:01:26 -04:00
printer-flsun-qqs-2020.cfg
config: added a configuration file for FLSUN QQ-S Pro delta printer (#4237)
2021-06-27 18:27:39 -04:00
printer-fokoos-odin5-f3-2021.cfg
config: Enable PID for bed heater in printer-fokoos-odin5-f3-2021.cfg (#4288)
2021-05-13 22:33:00 -04:00
printer-hiprecy-leo-2019.cfg
config: Remove URLs to github repository
2021-09-23 19:45:22 -04:00
printer-longer-lk4-pro-2019.cfg
config: Don't use arduino mega aliases in example config files
2021-03-25 10:49:17 -04:00
printer-lulzbot-mini1-2016.cfg
config: Update example configs to use rotation_distance
2020-12-18 10:38:49 -05:00
printer-lulzbot-taz6-2017.cfg
config: Updates to TAZ6 single extruder config (#3750)
2021-01-14 11:01:58 -05:00
printer-lulzbot-taz6-dual-v3-2017.cfg
docs: Prefer Jinja2 "set" directive to default_parameter_xxx in examples
2021-04-26 12:44:51 -04:00
printer-makergear-m2-2012.cfg
endstop_phase: Obtain phases directly from stepper microsteps config
2020-12-18 10:30:32 -05:00
printer-makergear-m2-2016.cfg
config: Update example configs to use rotation_distance
2020-12-18 10:38:49 -05:00
printer-micromake-d1-2016.cfg
config: Don't use arduino mega aliases in example config files
2021-03-25 10:49:17 -04:00
printer-monoprice-mini-delta-2017.cfg
stm32: Simplify USB/Serial/CANbus Kconfig selection
2021-03-18 13:33:33 -04:00
printer-monoprice-select-mini-v2-2018.cfg
stm32: Simplify USB/Serial/CANbus Kconfig selection
2021-03-18 13:33:33 -04:00
printer-mtw-create-2015.cfg
config: Update example configs to use rotation_distance
2020-12-18 10:38:49 -05:00
printer-prusa-mini-plus-2020.cfg
config: Update gear_ratio for Prusa Mini+ extruder based on counting teeth
2021-06-22 15:39:26 -04:00
printer-robo3d-r2-2017.cfg
config: Update printer-robo3d-r2-2017.cfg
2021-03-27 12:55:17 -04:00
printer-seemecnc-rostock-max-v2-2015.cfg
config: Update example configs to use rotation_distance
2020-12-18 10:38:49 -05:00
printer-sovol-sv01-2020.cfg
config: Don't use arduino mega aliases in example config files
2021-03-25 10:49:17 -04:00
printer-sunlu-s8-2020.cfg
config: Don't use arduino mega aliases in example config files
2021-03-25 10:49:17 -04:00
printer-tevo-flash-2018.cfg
config: Don't use arduino mega aliases in example config files
2021-03-25 10:49:17 -04:00
printer-tevo-tarantula-pro-2020.cfg
config: Don't use arduino mega aliases in example config files
2021-03-25 10:49:17 -04:00
printer-tronxy-p802e-2020.cfg
config: Update example configs to use rotation_distance
2020-12-18 10:38:49 -05:00
printer-tronxy-p802m-2020.cfg
config: Update example configs to use rotation_distance
2020-12-18 10:38:49 -05:00
printer-tronxy-x5s-2018.cfg
config: Update example configs to use rotation_distance
2020-12-18 10:38:49 -05:00
printer-tronxy-x5sa-pro-2020.cfg
config: Modify printer-tronxy-x5sa-pro-2020.cfg (#4330)
2021-06-02 10:48:24 -04:00
printer-tronxy-x5sa-v6-2019.cfg
stm32: Simplify USB/Serial/CANbus Kconfig selection
2021-03-18 13:33:33 -04:00
printer-tronxy-x8-2018.cfg
config: Update example configs to use rotation_distance
2020-12-18 10:38:49 -05:00
printer-twotrees-sapphire-plus-2020.cfg
config: Fix rotation_distance for Sapphire Plus
2021-05-12 10:00:55 -04:00
printer-twotrees-sapphire-pro-2020.cfg
config: Comment updates for recent "make menuconfig" updates
2021-03-29 20:00:26 -04:00
printer-velleman-k8200-2013.cfg
config: Don't use arduino mega aliases in example config files
2021-03-25 10:49:17 -04:00
printer-velleman-k8800-2017.cfg
config: Minor updates to printer-velleman-k8800-2017.cfg
2021-05-06 11:38:31 -04:00
printer-wanhao-duplicator-6-2016.cfg
config: Update example configs to use rotation_distance
2020-12-18 10:38:49 -05:00
printer-wanhao-duplicator-9-2018.cfg
config: Don't use arduino mega aliases in example config files
2021-03-25 10:49:17 -04:00
printer-wanhao-duplicator-i3-mini-2017.cfg
config: Don't use arduino mega aliases in example config files
2021-03-25 10:49:17 -04:00
printer-wanhao-duplicator-i3-plus-2017.cfg
config: Update example configs to use rotation_distance
2020-12-18 10:38:49 -05:00
printer-wanhao-duplicator-i3-plus-mark2-2019.cfg
config: Update example configs to use rotation_distance
2020-12-18 10:38:49 -05:00
printer-wanhao-duplicator-i3-v2.1-2017.cfg
config: Remove URLs to github repository
2021-09-23 19:45:22 -04:00
sample-aliases.cfg
avr: Rename the analog-only PE0/PE1 pins on atmega168/328 to PE2/PE3
2021-08-14 22:00:17 -04:00
sample-bigtreetech-exp-mot.cfg
config: Use "stealthchop_threshold: 999999" if set
2021-05-09 09:02:43 -04:00
sample-glyphs.cfg
docs: Move config reference information to new Config_Reference.md
2020-11-18 20:10:21 -05:00
sample-idex.cfg
config: Update example configs to use rotation_distance
2020-12-18 10:38:49 -05:00
sample-lcd.cfg
config: Add a note on wiring EXP1 to EXP3 on Creality 12864 displays
2021-05-28 11:55:18 -04:00
sample-macros.cfg
config: Fix M300 beeper example. (#4480)
2021-07-20 11:00:11 -04:00
sample-mmu2s-diy.cfg
config: Use "stealthchop_threshold: 999999" if set
2021-05-09 09:02:43 -04:00
sample-multi-extruder.cfg
config: Update example configs to use rotation_distance
2020-12-18 10:38:49 -05:00
sample-multi-mcu.cfg
config: Don't use arduino aliases in example-xxx.cfg files
2021-03-25 10:49:17 -04:00
sample-probe-as-z-endstop.cfg
docs: Move config reference information to new Config_Reference.md
2020-11-18 20:10:21 -05:00
sample-pwm-tool.cfg
docs: Add referenced config example for PWM tools (#4537)
2021-09-03 18:10:09 -04:00
sample-raspberry-pi.cfg
docs: Prefer Jinja2 "set" directive to default_parameter_xxx in examples
2021-04-26 12:44:51 -04:00