CreatBot/CreatBotKlipper
CreatBot/CreatBotKlipper
7
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
CreatBotKlipper/klippy/extras
History
Kevin O'Connor 2a9a133f36 bltouch: Raise the probe as soon as the endstop triggers 
Start the raise sequence once the endstop notification arrives.  This
can reduce the response time as it does not require waiting for the
homing sequence to fully finalize.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-04-02 13:43:01 -04:00
..
display
menu: changes in tune menu according to #4023 (#4086)
2021-03-23 10:55:25 -04:00
__init__.py
…
ad5206.py
extras: Use "from . import module" for relative imports
2020-06-15 17:15:53 -04:00
adc_scaled.py
adc_scaled: Add support for Duet2 Maestro "vref monitoring"
2020-09-09 22:20:54 -04:00
adc_temperature.py
spi_temperature: Simplify and comment MAX31865 temperature calculations
2020-09-02 10:04:35 -04:00
adxl345.py
adxl345: Add accelerometer chip name to the raw data file name
2021-02-02 14:13:24 -05:00
bed_mesh.py
bed_mesh: lookup the toolhead object in "handle_connect"
2021-04-01 09:32:23 -04:00
bed_screws.py
homing: Prefer printer.command_error() instead of homing.CommandError()
2020-09-04 12:10:36 -04:00
bed_tilt.py
gcode_move: Move GCodeMove class from gcode.py to new extras module
2020-08-20 21:03:22 -04:00
bltouch.py
bltouch: Raise the probe as soon as the endstop triggers
2021-04-02 13:43:01 -04:00
bme280.py
bme280: Add support for BMP280 and BME680 sensors (#4040)
2021-03-15 11:50:29 -04:00
board_pins.py
board_pins: Use an explicit parameter to specify mcu name(s)
2020-11-20 12:00:36 -05:00
bus.py
tmc2130: Verify SPI register writes
2021-03-10 17:12:25 -05:00
buttons.py
buttons: Improve python3 compatibility
2020-09-04 19:33:04 -04:00
canbus_ids.py
mcu: Add support for connecting to devices on a CAN bus
2021-03-13 11:29:41 -05:00
controller_fan.py
heater_fan: Fix typo causing excessive cpu usage
2020-12-01 12:31:22 -05:00
delayed_gcode.py
klippy: Rename try_load_module() to load_object()
2020-05-08 11:05:14 -04:00
delta_calibrate.py
delta_calibrate: Don't error on an invalid kinematic guess
2020-09-17 22:41:13 -04:00
display_status.py
display_status: fix M117 checksum trimming (#3377)
2020-09-28 10:11:05 -04:00
dotstar.py
dotstar: Don't flush the lookahead queue on a SET_LED command
2020-10-29 12:00:28 -04:00
ds18b20.py
ds18b20: new module for 1-wire temperature sensor (#3462)
2021-02-02 14:34:56 -05:00
endstop_phase.py
homing: Make homing.py an "extras" module
2021-01-08 14:01:34 -05:00
extruder_stepper.py
extruder_stepper: Don't directly access extruder member variables
2020-06-06 14:41:15 -04:00
fan_generic.py
fan_generic: Add support for named fans and gcode to control them (#3054)
2020-08-07 11:39:44 -04:00
fan.py
fan: Minor updates to tachometer handling
2021-03-01 14:57:40 -05:00
filament_motion_sensor.py
filament_motion_sensor: Add filament_motion_sensor (#3857)
2021-03-14 21:36:19 -04:00
filament_switch_sensor.py
filament_switch_sensor: report "enabled" state via get_status
2020-08-01 15:56:51 -04:00
firmware_retraction.py
firmware_retraction: Use new GCodeCommand wrappers
2020-05-05 11:08:11 -04:00
force_move.py
gcode: Automatically call reset_last_position() on a toolhead set_position()
2020-08-20 21:03:22 -04:00
gcode_arcs.py
gcode_move: Move GCodeMove class from gcode.py to new extras module
2020-08-20 21:03:22 -04:00
gcode_button.py
gcode_button: Add support for analog buttons
2020-09-09 14:21:30 -04:00
gcode_macro.py
gcode_macro: Use deepcopy() on get_status() results
2021-01-20 16:25:25 -05:00
gcode_move.py
gcode_move: Make sure to call reset_last_position() in _handle_ready()
2021-03-31 22:15:54 -04:00
hall_filament_width_sensor.py
hall_filament_width_sensor: fix range check error (#4113)
2021-03-27 12:53:40 -04:00
heater_bed.py
heaters: Make sure set_temp() command wakes up the idle_timeout
2021-03-05 18:59:01 -05:00
heater_fan.py
heater_fan: Fix typo causing excessive cpu usage
2020-12-01 12:31:22 -05:00
heater_generic.py
klippy: Rename try_load_module() to load_object()
2020-05-08 11:05:14 -04:00
heaters.py
heaters: Make sure set_temp() command wakes up the idle_timeout
2021-03-05 18:59:01 -05:00
homing_heaters.py
homing: Pass the HomingMove class to homing_move_begin/end events
2021-03-29 21:20:57 -04:00
homing_override.py
homing: Make homing.py an "extras" module
2021-01-08 14:01:34 -05:00
homing.py
homing: Pass the HomingMove class to homing_move_begin/end events
2021-03-29 21:20:57 -04:00
htu21d.py
htu21d: sensor definition fix (#4075)
2021-03-18 23:38:07 -04:00
idle_timeout.py
idle_timeout: change standard timeout g-code (#4018)
2021-03-07 13:48:54 -05:00
input_shaper.py
input_shaper: Simplify input shaper type reporting
2020-12-01 11:36:37 -05:00
lm75.py
lm75: Implement support for min_temp/max_temp checks
2021-02-01 10:37:19 -05:00
manual_probe.py
manual_probe: Use configfile note_valid=False when inspecting Z position_endstop
2020-12-13 10:41:40 -05:00
manual_stepper.py
homing: Move homing logic from manual_stepper.py to homing.py
2021-03-29 21:20:57 -04:00
mcp4018.py
…
mcp4451.py
extras: Use "from . import module" for relative imports
2020-06-15 17:15:53 -04:00
mcp4728.py
extras: Use "from . import module" for relative imports
2020-06-15 17:15:53 -04:00
multi_pin.py
mcu: Add support for changing cycle_time in set_pwm()
2020-09-26 20:55:56 -04:00
neopixel.py
neopixel: Don't wait for responses when in debug mode.
2020-12-01 11:36:37 -05:00
output_pin.py
output_pin: Fix bug in setting of self.resend_interval
2021-03-27 14:52:21 -04:00
palette2.py
palette2: Add support for P2 devices (#4057)
2021-03-26 11:21:10 -04:00
pause_resume.py
pause_resume: Perform setup via "klippy:connect" instead of "klippy:ready"
2021-04-01 10:10:39 -04:00
pid_calibrate.py
heaters: Make sure set_temp() command wakes up the idle_timeout
2021-03-05 18:59:01 -05:00
print_stats.py
print_stats: exclude time prior to first extrusion from "print_duration"
2020-11-13 20:48:15 -05:00
probe.py
homing: Pass the HomingMove class to homing_move_begin/end events
2021-03-29 21:20:57 -04:00
pulse_counter.py
fan: Minor updates to tachometer handling
2021-03-01 14:57:40 -05:00
quad_gantry_level.py
quad_gantry_level: Add additional comments on how leveling works
2020-09-03 12:09:02 -04:00
query_adc.py
query_adc: Use new GCodeCommand wrappers
2020-05-05 11:08:11 -04:00
query_endstops.py
gcode_macro: Use deepcopy() on get_status() results
2021-01-20 16:25:25 -05:00
replicape.py
replicape: Don't require a host alias for the enable_pin default
2021-03-25 10:49:17 -04:00
resonance_tester.py
resonance_tester: Increase test max_accel to 10K and max_freq to 133 Hz
2021-02-02 14:13:24 -05:00
respond.py
…
safe_z_home.py
homing: Make homing.py an "extras" module
2021-01-08 14:01:34 -05:00
samd_sercom.py
…
save_variables.py
gcode_macro: Use deepcopy() on get_status() results
2021-01-20 16:25:25 -05:00
screws_tilt_adjust.py
extras: Use "from . import module" for relative imports
2020-06-15 17:15:53 -04:00
servo.py
servo: Set initial value via mcu_servo.setup_start_value()
2020-07-25 11:39:39 -04:00
shaper_calibrate.py
graph_accelerometer: Support axis-level comparison of adxl345 data
2021-03-20 13:24:43 -04:00
skew_correction.py
skew_correction: Register during "connect" phase instead of "ready" phase
2021-03-31 22:13:36 -04:00
spi_temperature.py
spi_temperature: Improve handling of min_temp/max_temp overflows
2021-02-01 10:37:19 -05:00
static_digital_output.py
…
statistics.py
…
stepper_enable.py
gcode: Report the final print_time in debuginput mode
2020-07-30 12:53:59 -04:00
sx1509.py
mcu: Add support for changing cycle_time in set_pwm()
2020-09-26 20:55:56 -04:00
temperature_fan.py
temperature_fan: Add MAX_SPEED and MIN_SPEED to SET_TEMPERATURE_FAN_TARGET command (#3873)
2021-02-02 14:30:04 -05:00
temperature_host.py
temperature_host: Rename "path" config to "sensor_path"
2021-02-20 09:23:13 -05:00
temperature_mcu.py
temperature_mcu: Improve handling when in debug output mode
2021-01-24 15:28:16 -05:00
temperature_sensor.py
temperature_sensor: Report temperature in stats
2020-12-06 21:55:26 -05:00
thermistor.py
thermistor: Add support for the board thermistor on the Einsy Rambo
2020-10-08 15:25:09 -04:00
tmc2130.py
tmc2130: Report CS_ACTUAL in DUMP_TMC even if zero
2021-03-16 11:31:24 -04:00
tmc2208.py
tmc: Move SET_TMC_CURRENT command to TMCCommandHelper()
2021-02-27 10:39:46 -05:00
tmc2209.py
tmc: Move SET_TMC_CURRENT command to TMCCommandHelper()
2021-02-27 10:39:46 -05:00
tmc2660.py
tmc2660: Fix typo in seup field
2021-03-18 23:36:25 -04:00
tmc5160.py
tmc: Fix order of init during sensorless homing
2021-02-28 18:30:25 -05:00
tmc_uart.py
tmc_uart: Limit to only one active uart at a time on an mcu
2021-03-12 20:51:11 -05:00
tmc.py
homing: Pass the HomingMove class to homing_move_begin/end events
2021-03-29 21:20:57 -04:00
tsl1401cl_filament_width_sensor.py
hall_filament_width_sensor: Fix race condition (#3790)
2021-01-22 13:41:34 -05:00
tuning_tower.py
gcode_move: Move GCodeMove class from gcode.py to new extras module
2020-08-20 21:03:22 -04:00
verify_heater.py
docs: Move config reference information to new Config_Reference.md
2020-11-18 20:10:21 -05:00
virtual_sdcard.py
palette2: Add support for P2 devices (#4057)
2021-03-26 11:21:10 -04:00
z_tilt.py
gcode: Automatically call reset_last_position() on a toolhead set_position()
2020-08-20 21:03:22 -04:00