CreatBotKlipper

History

Kevin O'Connor ea9eac6c38 Kconfig: Change the default usb vendor/product id

Change the product/vendor id to 0x1d50/0x614e, which has been reserved
for Klipper (thanks to the openmoko project).

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

2020-05-31 21:05:04 -04:00

_layouts

docs: Fix markdown table layout in html rendering

2019-04-18 22:56:56 -04:00

img

docs: Update FAQ with TMC2208 "standalone" mode workaround

2020-03-29 11:08:49 -04:00

prints

docs: Minor cleanup to square_tower.scad

2019-10-27 12:16:17 -04:00

_config.yml

docs: Fix inclusion of CONTRIBUTING.md in the automatic html generation

2019-04-18 23:10:32 -04:00

beaglebone.md

scripts: Replicape pru update start scripts (#2277 )

2019-12-18 12:11:40 -05:00

Bed_Level.md

docs: Minor wording change to Bed_Level.md

2019-05-23 19:31:44 -04:00

Bed_Mesh.md

docs: Update documentation to reflect bed_mesh changes

2020-01-09 14:14:13 -05:00

Benchmarks.md

docs: Update SAMD51 benchmarks

2019-11-18 12:49:05 -05:00

BLTouch.md

docs: Add stow_on_each_sample description to BL-Touch.md

2020-05-11 12:46:25 -04:00

Bootloaders.md

docs: Update bootloaders.md with HID bootloader documentation

2020-05-28 14:44:51 -04:00

CNAME

docs: Fixup github pages

2019-04-14 22:41:23 -04:00

Code_Overview.md

docs: Minor updates to Code_Overview.md

2020-03-02 21:54:22 -05:00

Command_Templates.md

docs: Note that printer.heater got changed to printer.heaters

2020-04-26 17:30:57 -04:00

Config_Changes.md

Kconfig: Change the default usb vendor/product id

2020-05-31 21:05:04 -04:00

Config_checks.md

docs: Minor formatting change to Config_checks.md

2020-01-06 10:45:53 -05:00

Contact.md

docs: Fix typo in Contact.md

2020-05-24 15:26:00 -04:00

CONTRIBUTING.md

docs: Add a CONTRIBUTING document

2017-12-24 12:33:01 -05:00

Debugging.md

config: Rename avrsim.cfg to generic-simulavr.cfg

2019-11-24 20:21:13 -05:00

Delta_Calibrate.md

docs: Update Delta_Calibrate.md with probe location bias info

2019-06-06 10:08:58 -04:00

developer-certificate-of-origin

docs: Add a CONTRIBUTING document

2017-12-24 12:33:01 -05:00

Endstop_Phase.md

docs: Minor wording change to Endstop_Phase.md

2020-03-01 11:40:13 -05:00

FAQ.md

docs: Update FAQ with TMC2208 "standalone" mode workaround

2020-03-29 11:08:49 -04:00

Features.md

docs: Update SAMD51 benchmarks

2019-11-18 12:49:05 -05:00

G-Codes.md

docs: Clarify that Probe_Calibrate uses the speed variable for XY as well (#2735 )

2020-05-05 09:03:39 -04:00

HallFilamentWidthSensor.md

docs: Update HallFilamentWidthSensor.md (#2827 )

2020-05-05 17:45:26 -04:00

Installation.md

docs: Recommend RPi 2 or later in Installation.md

2020-02-17 20:49:32 -05:00

issue_template.md

docs: Add github issue template

2018-01-31 14:30:05 -05:00

Kinematics.md

kin_extruder: Convert pressure advance to use "weighted average"

2019-12-20 12:21:58 -05:00

Manual_Level.md

docs: Update Manual_Level.md Z_ENDSTOP_CALIBRATE instructions

2020-03-22 11:18:31 -04:00

MCU_Commands.md

docs: Update MCU_Commands with schedule_soft_pwm_out changes

2019-08-01 00:23:09 -04:00

Overview.md

hall_filament_width_sensor: Add new filament sensor

2020-02-14 13:14:34 -05:00

Packaging.md

util: Fix versioning when gitdir is absent (#809 )

2018-10-27 10:44:38 -04:00

Pressure_Advance.md

docs: Minor wording change in Pressure_Advance.md

2019-11-25 11:48:41 -05:00

Probe_Calibrate.md

probe: Add range to probe accuracy results (#2015 )

2019-09-29 16:56:46 -04:00

Protocol.md

docs: Update Protocol.md to use enumerations for pins

2019-07-09 14:17:28 -04:00

README.md

docs: Improve documentation for those starting in docs/

2017-04-27 16:05:26 -04:00

Releases.md

docs: Update release notes for v0.8.0 release

2019-10-21 22:30:04 -04:00

Sensorless_Homing.md

docs: Update Sensorless_Homing.md with new TMCs (#1958 )

2019-10-03 17:56:40 -04:00

skew_correction.md

docs: Update for latest changs to skew_correction

2019-06-29 10:58:46 -04:00

Slicers.md

docs: Add info on S3D "extra retract distance" to Slicers.md

2020-03-22 11:00:02 -04:00

stm32f0_CAN.md

stm32f0: Various fixes according to comment: (#1453 )

2019-03-28 10:21:51 -04:00

TSL1401CL_Filament_Width_Sensor.md

tsl1401cl_filament_width_sensor: Filament Width Sensor Support (#1132 )

2019-02-14 10:13:48 -05:00

README.md

Welcome to the Klipper documentation. The overview document is a good starting point.