CreatBotKlipper

History

Kevin O'Connor 43bb45a1d3 docs: Minor update to Config_Changes.md

Use same "ls /dev/serial/by-id/*" command used in Installation.md.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

2019-12-01 14:25:40 -05:00

_layouts

…

img

docs: Update Pressure_Advance.md to use tuning tower

2019-10-23 19:28:03 -04:00

prints

docs: Minor cleanup to square_tower.scad

2019-10-27 12:16:17 -04:00

_config.yml

…

beaglebone.md

…

Bed_Level.md

…

Benchmarks.md

docs: Update SAMD51 benchmarks

2019-11-18 12:49:05 -05:00

BLTouch.md

docs: Recommend safe_z_home over homing_override

2019-11-07 16:50:52 -05:00

Bootloaders.md

docs: Update example openocd config in Bootloaders.md

2019-10-23 19:05:04 -04:00

CNAME

…

Code_Overview.md

stepper: Add get/set_tag_position() and convert calc_position()

2019-11-13 19:00:17 -05:00

Command_Templates.md

toolhead: Report which axes are homed via get_status()

2019-11-24 20:21:13 -05:00

Config_Changes.md

docs: Minor update to Config_Changes.md

2019-12-01 14:25:40 -05:00

Config_checks.md

docs: Add Bed_Level.md and Probe_Calibrate.md documents

2019-02-12 13:20:32 -05:00

Contact.md

…

CONTRIBUTING.md

…

Debugging.md

config: Rename avrsim.cfg to generic-simulavr.cfg

2019-11-24 20:21:13 -05:00

Delta_Calibrate.md

…

developer-certificate-of-origin

…

Endstop_Phase.md

…

FAQ.md

docs: Recommend safe_z_home over homing_override

2019-11-07 16:50:52 -05:00

Features.md

docs: Update SAMD51 benchmarks

2019-11-18 12:49:05 -05:00

G-Codes.md

extruder: Initial support for "smoothed pressure advance"

2019-11-21 13:18:19 -05:00

Installation.md

docs: Recommend OctoPrint v1.3.12 in Installation.md

2019-10-30 11:02:03 -04:00

issue_template.md

…

Kinematics.md

docs: Kinematics.md updates for extruder instantaneous corner velocity

2019-11-22 17:04:14 -05:00

Manual_Level.md

docs: Minor wording changes to Manual_level.md

2019-10-16 16:48:50 -04:00

MCU_Commands.md

docs: Update MCU_Commands with schedule_soft_pwm_out changes

2019-08-01 00:23:09 -04:00

Overview.md

docs: Remove outdated stm32f1.md document

2019-10-23 18:53:11 -04:00

Packaging.md

…

Pressure_Advance.md

docs: Minor wording change in Pressure_Advance.md

2019-11-25 11:48:41 -05:00

Probe_Calibrate.md

probe: Add range to probe accuracy results (#2015 )

2019-09-29 16:56:46 -04:00

Protocol.md

docs: Update Protocol.md to use enumerations for pins

2019-07-09 14:17:28 -04:00

README.md

…

Releases.md

docs: Update release notes for v0.8.0 release

2019-10-21 22:30:04 -04:00

Sensorless_Homing.md

docs: Update Sensorless_Homing.md with new TMCs (#1958 )

2019-10-03 17:56:40 -04:00

skew_correction.md

docs: Update for latest changs to skew_correction

2019-06-29 10:58:46 -04:00

Slicers.md

docs: Warn against using "PreloadVE" on KISSlicer

2019-06-23 12:18:24 -04:00

stm32f0_CAN.md

…

TSL1401CL_Filament_Width_Sensor.md

…

README.md

Welcome to the Klipper documentation. The overview document is a good starting point.