CreatBotKlipper

History

Kevin O'Connor d651851567 pru: Disable ADC reading directly from the PRU

The PRU code size has grown too close to the maximum - remove the ADC
code to reduce its overall size.  (On the beaglebone, the Linux
process can, and typically does, do the ADC reading.)

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

2018-06-27 12:10:25 -04:00

img

docs: Update documentation with iterative solver changes

2018-06-20 09:26:10 -04:00

prints

docs: Minor update to square.scad

2018-01-02 21:56:29 -05:00

beaglebone.md

pru: Disable ADC reading directly from the PRU

2018-06-27 12:10:25 -04:00

Code_Overview.md

itersolve: Support setting the stepper position via a cartesian coordinate

2018-06-22 14:09:01 -04:00

Config_checks.md

docs: Recommend running PID_CALIBRATE in Config_checks.md

2018-03-18 12:43:41 -04:00

Contact.md

docs: Try to make the klippy.log bug reporting more clear

2018-01-21 13:08:31 -05:00

CONTRIBUTING.md

docs: Add a CONTRIBUTING document

2017-12-24 12:33:01 -05:00

Debugging.md

docs: Update Debugging.md with information on logextract

2018-01-11 13:48:40 -05:00

developer-certificate-of-origin

docs: Add a CONTRIBUTING document

2017-12-24 12:33:01 -05:00

FAQ.md

docs: Update documentation to note use of /dev/serial/by-path/

2018-06-01 17:22:03 -04:00

Features.md

docs: Add LPC1768 benchmarks to Features.md document

2018-05-25 11:52:13 -04:00

G-Codes.md

toolhead: Add support for the M204 command

2018-06-15 12:05:45 -04:00

Installation.md

docs: Update installation document for OctoPrint 1.3.7

2018-04-09 11:39:36 -04:00

issue_template.md

docs: Add github issue template

2018-01-31 14:30:05 -05:00

Kinematics.md

docs: Update documentation with iterative solver changes

2018-06-20 09:26:10 -04:00

MCU_Commands.md

basecmd: Rename get_status to get_clock

2018-05-29 10:57:29 -04:00

Overview.md

docs: Add a G-Codes.md file with the list of available commands

2018-03-08 14:11:20 -05:00

Pressure_Advance.md

docs: Note pressure_advance over 0.20 is unlikely to improve quality

2018-01-08 11:07:26 -05:00

Protocol.md

docs: Use only single space at start of new sentence

2017-05-01 11:58:32 -04:00

README.md

…

Releases.md

docs: Update release notes for v0.6.0 release

2018-03-31 14:04:39 -04:00

Todo.md

docs: Remove lpc176x item from Todo

2018-05-25 13:56:54 -04:00

README.md

Welcome to the Klipper documentation. The overview document is a good starting point.