CreatBotKlipper

History

ds18b20: new module for 1-wire temperature sensor (#3462 )

Initial commit of code to support 1-wire (Dallas) sensors such
as the DS18B20. Requires Linux kernel drivers to create a file
in /sysfs which is read by this module, and temperature
typically returned to a temperature_fan.

Signed-off-by: Alan Lord <alanslists@gmail.com>
Signed-off-by: Josh Headapohl <joshhead@gmail.com>

2021-02-02 14:34:56 -05:00

display

hd44780: Add hd44780 protocol init config

2021-01-31 19:35:40 -05:00

__init__.py

klippy: Add support for dynamic loading of python modules

2018-01-28 12:19:26 -05:00

ad5206.py

extras: Use "from . import module" for relative imports

2020-06-15 17:15:53 -04:00

adc_scaled.py

adc_scaled: Add support for Duet2 Maestro "vref monitoring"

2020-09-09 22:20:54 -04:00

adc_temperature.py

spi_temperature: Simplify and comment MAX31865 temperature calculations

2020-09-02 10:04:35 -04:00

adxl345.py

adxl345: Add accelerometer chip name to the raw data file name

2021-02-02 14:13:24 -05:00

bed_mesh.py

webhooks: Fix use of deprecated Exception.message attribute (#3781 )

2021-01-17 22:37:41 -05:00

bed_screws.py

homing: Prefer printer.command_error() instead of homing.CommandError()

2020-09-04 12:10:36 -04:00

bed_tilt.py

gcode_move: Move GCodeMove class from gcode.py to new extras module

2020-08-20 21:03:22 -04:00

bltouch.py

bltouch: Fix bug causing incorrect position when "stow_on_each_sample=False"

2020-10-24 00:22:58 -04:00

bme280.py

bme280: Implement support for min_temp/max_temp checks

2021-02-01 11:27:16 -05:00

board_pins.py

board_pins: Use an explicit parameter to specify mcu name(s)

2020-11-20 12:00:36 -05:00

bus.py

…

buttons.py

buttons: Improve python3 compatibility

2020-09-04 19:33:04 -04:00

controller_fan.py

heater_fan: Fix typo causing excessive cpu usage

2020-12-01 12:31:22 -05:00

delayed_gcode.py

klippy: Rename try_load_module() to load_object()

2020-05-08 11:05:14 -04:00

delta_calibrate.py

delta_calibrate: Don't error on an invalid kinematic guess

2020-09-17 22:41:13 -04:00

display_status.py

display_status: fix M117 checksum trimming (#3377 )

2020-09-28 10:11:05 -04:00

dotstar.py

dotstar: Don't flush the lookahead queue on a SET_LED command

2020-10-29 12:00:28 -04:00

ds18b20.py

ds18b20: new module for 1-wire temperature sensor (#3462 )

2021-02-02 14:34:56 -05:00

endstop_phase.py

homing: Make homing.py an "extras" module

2021-01-08 14:01:34 -05:00

extruder_stepper.py

extruder_stepper: Don't directly access extruder member variables

2020-06-06 14:41:15 -04:00

fan_generic.py

fan_generic: Add support for named fans and gcode to control them (#3054 )

2020-08-07 11:39:44 -04:00

fan.py

fan: Separate out the part cooling fan code from the generic fan code

2020-07-05 21:04:04 -04:00

filament_switch_sensor.py

filament_switch_sensor: report "enabled" state via get_status

2020-08-01 15:56:51 -04:00

firmware_retraction.py

…

force_move.py

gcode: Automatically call reset_last_position() on a toolhead set_position()

2020-08-20 21:03:22 -04:00

gcode_arcs.py

gcode_move: Move GCodeMove class from gcode.py to new extras module

2020-08-20 21:03:22 -04:00

gcode_button.py

gcode_button: Add support for analog buttons

2020-09-09 14:21:30 -04:00

gcode_macro.py

gcode_macro: Use deepcopy() on get_status() results

2021-01-20 16:25:25 -05:00

gcode_move.py

homing: Make homing.py an "extras" module

2021-01-08 14:01:34 -05:00

hall_filament_width_sensor.py

hall_filament_width_sensor: Fix race condition (#3790 )

2021-01-22 13:41:34 -05:00

heater_bed.py

klippy: Rename try_load_module() to load_object()

2020-05-08 11:05:14 -04:00

heater_fan.py

heater_fan: Fix typo causing excessive cpu usage

2020-12-01 12:31:22 -05:00

heater_generic.py

klippy: Rename try_load_module() to load_object()

2020-05-08 11:05:14 -04:00

heaters.py

ds18b20: new module for 1-wire temperature sensor (#3462 )

2021-02-02 14:34:56 -05:00

homing_heaters.py

klippy: Rename try_load_module() to load_object()

2020-05-08 11:05:14 -04:00

homing_override.py

homing: Make homing.py an "extras" module

2021-01-08 14:01:34 -05:00

homing.py

homing: Fix references to CommandError()

2021-01-11 10:01:14 -05:00

htu21d.py

htu21d: Implement support for min_temp/max_temp checks

2021-02-01 11:30:27 -05:00

idle_timeout.py

klippy: Rename try_load_module() to load_object()

2020-05-08 11:05:14 -04:00

input_shaper.py

input_shaper: Simplify input shaper type reporting

2020-12-01 11:36:37 -05:00

lm75.py

lm75: Implement support for min_temp/max_temp checks

2021-02-01 10:37:19 -05:00

manual_probe.py

manual_probe: Use configfile note_valid=False when inspecting Z position_endstop

2020-12-13 10:41:40 -05:00

manual_stepper.py

homing: Prefer printer.command_error() instead of homing.CommandError()

2020-09-04 12:10:36 -04:00

mcp4018.py

…

mcp4451.py

extras: Use "from . import module" for relative imports

2020-06-15 17:15:53 -04:00

mcp4728.py

extras: Use "from . import module" for relative imports

2020-06-15 17:15:53 -04:00

multi_pin.py

mcu: Add support for changing cycle_time in set_pwm()

2020-09-26 20:55:56 -04:00

neopixel.py

neopixel: Don't wait for responses when in debug mode.

2020-12-01 11:36:37 -05:00

output_pin.py

output_pin: Don't flush lookahead queue on a SET_PIN command

2020-11-13 18:29:41 -05:00

pause_resume.py

webhooks: Remove "method" parameter from webhook requests

2020-08-16 13:20:25 -04:00

pid_calibrate.py

pid_calibrate: Update for improved python3 compatibility

2020-09-04 19:30:18 -04:00

print_stats.py

print_stats: exclude time prior to first extrusion from "print_duration"

2020-11-13 20:48:15 -05:00

probe.py

homing: Make homing.py an "extras" module

2021-01-08 14:01:34 -05:00

quad_gantry_level.py

quad_gantry_level: Add additional comments on how leveling works

2020-09-03 12:09:02 -04:00

query_adc.py

…

query_endstops.py

gcode_macro: Use deepcopy() on get_status() results

2021-01-20 16:25:25 -05:00

replicape.py

pca9685: Use move queue for pwm updates

2020-12-04 16:10:13 -05:00

resonance_tester.py

resonance_tester: Increase test max_accel to 10K and max_freq to 133 Hz

2021-02-02 14:13:24 -05:00

respond.py

…

rpi_temperature.py

rpi_temperature: Fix time reporting of temperature measurements

2021-01-24 15:37:37 -05:00

safe_z_home.py

homing: Make homing.py an "extras" module

2021-01-08 14:01:34 -05:00

samd_sercom.py

…

save_variables.py

gcode_macro: Use deepcopy() on get_status() results

2021-01-20 16:25:25 -05:00

screws_tilt_adjust.py

extras: Use "from . import module" for relative imports

2020-06-15 17:15:53 -04:00

servo.py

servo: Set initial value via mcu_servo.setup_start_value()

2020-07-25 11:39:39 -04:00

shaper_calibrate.py

shaper_calibrate: Choose input shapers accounting smoothing

2020-12-22 18:37:41 -05:00

skew_correction.py

gcode: Split G0/G1 command handling to new gcode_move class

2020-08-20 21:03:22 -04:00

spi_temperature.py

spi_temperature: Improve handling of min_temp/max_temp overflows

2021-02-01 10:37:19 -05:00

static_digital_output.py

…

statistics.py

…

stepper_enable.py

gcode: Report the final print_time in debuginput mode

2020-07-30 12:53:59 -04:00

sx1509.py

mcu: Add support for changing cycle_time in set_pwm()

2020-09-26 20:55:56 -04:00

temperature_fan.py

temperature_fan: Add MAX_SPEED and MIN_SPEED to SET_TEMPERATURE_FAN_TARGET command (#3873 )

2021-02-02 14:30:04 -05:00

temperature_mcu.py

temperature_mcu: Improve handling when in debug output mode

2021-01-24 15:28:16 -05:00

temperature_sensor.py

temperature_sensor: Report temperature in stats

2020-12-06 21:55:26 -05:00

thermistor.py

thermistor: Add support for the board thermistor on the Einsy Rambo

2020-10-08 15:25:09 -04:00

tmc2130.py

tmc5160: diag0 support (#3159 )

2020-08-09 08:17:51 -04:00

tmc2208.py

extras: Use "from . import module" for relative imports

2020-06-15 17:15:53 -04:00

tmc2209.py

tmc5160: diag0 support (#3159 )

2020-08-09 08:17:51 -04:00

tmc2660.py

extras: Use "from . import module" for relative imports

2020-06-15 17:15:53 -04:00

tmc5160.py

tmc5160: diag0 support (#3159 )

2020-08-09 08:17:51 -04:00

tmc_uart.py

mcu: Avoid using "async" for variables as it conflicts with Python3

2020-06-15 17:15:53 -04:00

tmc.py

endstop_phase: Obtain phases directly from stepper microsteps config

2020-12-18 10:30:32 -05:00

tsl1401cl_filament_width_sensor.py

hall_filament_width_sensor: Fix race condition (#3790 )

2021-01-22 13:41:34 -05:00

tuning_tower.py

gcode_move: Move GCodeMove class from gcode.py to new extras module

2020-08-20 21:03:22 -04:00

verify_heater.py

docs: Move config reference information to new Config_Reference.md

2020-11-18 20:10:21 -05:00

virtual_sdcard.py

gcode: Split G0/G1 command handling to new gcode_move class

2020-08-20 21:03:22 -04:00

z_tilt.py

gcode: Automatically call reset_last_position() on a toolhead set_position()

2020-08-20 21:03:22 -04:00