Kevin O'Connor abf493496c mathutil: Disable queuelogger in background_coordinate_descent() ...

If the queuelogger was holding the lock when the process is forked
then any attempt to log from the background process would result in a
deadlock.  Attempt a workaround by disabling the queuelogger at the
start of the background process.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

2019-12-17 09:51:45 -05:00

..

chelper

itersolve: Improve numerical stability of gen_steps_pre_active check

2019-12-10 16:44:02 -05:00

extras

heater_bed: Move M140/M190 commands from gcode.py to heater_bed.py

2019-12-16 20:02:48 -05:00

kinematics

extruder: No need to track extrude_pos locally

2019-12-17 02:01:54 -05:00

clocksync.py

clocksync: Fix typo in pause() call at connect time

2019-10-31 11:36:35 -04:00

configfile.py

…

console.py

…

gcode.py

extruder: Move M104/M140 commands from gcode.py to extruder.py

2019-12-16 20:16:21 -05:00

heater.py

heater: Use printer.command_error() instead of internal heater.error()

2019-12-16 19:16:58 -05:00

homing.py

toolhead: Rename _full_flush() to flush_step_generation() and use globally

2019-11-21 13:17:45 -05:00

klippy.py

mcu: Contact and identify all the mcus prior to configuring them

2019-11-06 10:35:24 -05:00

mathutil.py

mathutil: Disable queuelogger in background_coordinate_descent()

2019-12-17 09:51:45 -05:00

mcu.py

mcu: Minor simplification to default reset detection

2019-11-12 22:15:04 -05:00

msgproto.py

msgproto: unresolved symbol fixed

2019-11-15 11:36:54 -05:00

parsedump.py

…

pins.py

stepper: Move MCU_stepper from mcu.py to stepper.py

2019-11-12 17:32:18 -05:00

queuelogger.py

mathutil: Disable queuelogger in background_coordinate_descent()

2019-12-17 09:51:45 -05:00

reactor.py

…

serialhdl.py

…

stepper.py

stepper: Remove set_commanded_position() call

2019-11-13 19:35:26 -05:00

toolhead.py

toolhead: Report which axes are homed via get_status()

2019-11-24 20:21:13 -05:00

util.py

…