Kevin O'Connor 0ec7eda11b pins: Add pin mapping for atmega1284p ...

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

2017-10-05 16:57:44 -04:00

..

cartesian.py

gcode: Report the raw MCU position from the M114 command

2017-10-03 22:03:52 -04:00

chelper.py

klippy: Avoid using '%' syntax when calling logging module

2017-09-27 12:38:20 -04:00

chipmisc.py

chipmisc: Add initial support for servos

2017-09-20 14:21:36 -04:00

clocksync.py

clocksync: Implement a floor on the prediction filter

2017-10-02 11:00:24 -04:00

console.py

clocksync: Move clock synchronization code into new file

2017-09-19 17:25:42 -04:00

corexy.py

gcode: Report the raw MCU position from the M114 command

2017-10-03 22:03:52 -04:00

delta.py

gcode: Report the raw MCU position from the M114 command

2017-10-03 22:03:52 -04:00

extruder.py

…

fan.py

…

gcode.py

gcode: Report the raw MCU position from the M114 command

2017-10-03 22:03:52 -04:00

heater.py

klippy: Avoid using '%' syntax when calling logging module

2017-09-27 12:38:20 -04:00

homing.py

gcode: Report the raw MCU position from the M114 command

2017-10-03 22:03:52 -04:00

klippy.py

klippy: Avoid using '%' syntax when calling logging module

2017-09-27 12:38:20 -04:00

list.h

…

mcu.py

endstop: Support oversampling of the endstop

2017-10-01 19:15:55 -04:00

msgproto.py

klippy: Avoid using '%' syntax when calling logging module

2017-09-27 12:38:20 -04:00

parsedump.py

…

pins.py

pins: Add pin mapping for atmega1284p

2017-10-05 16:57:44 -04:00

pyhelper.c

…

pyhelper.h

…

queuelogger.py

…

reactor.py

…

serialhdl.py

klippy: Avoid using '%' syntax when calling logging module

2017-09-27 12:38:20 -04:00

serialqueue.c

serialqueue: Don't report sent_time on responses that are retransmitted

2017-09-30 19:37:20 -04:00

serialqueue.h

…

stepcompress.c

stepcompress: Implement print time to clock conversion in C code

2017-09-19 17:25:43 -04:00

stepper.py

stepper: If homing_endstop_phase is configured, make 0.0 be at a full step

2017-10-03 22:06:51 -04:00

toolhead.py

gcode: Report the raw MCU position from the M114 command

2017-10-03 22:03:52 -04:00

util.py

klippy: Avoid using '%' syntax when calling logging module

2017-09-27 12:38:20 -04:00