Alexander Bazarov 8a3d2afd79 config: Config for Geeetech A-series printers: A10/M/T and A20/M/T (#6767) ...

Based on few configs found on the discourse forum, facebook groups.
In addition, using official schematics from:
https://www.geeetech.com/download.html
https://github.com/Geeetech3D/Diagram/files/8199212/GT2560V4.1BSCHA20T.pdf

Contains macros for filament mixing based on:
https://klipper.discourse.group/t/mixing-color-support/2246/12
https://klipper.discourse.group/t/mixing-hotend-m163-emulation/11423/2

Signed-off-by: Alexander Bazarov <oss@bazarov.dev>

2025-01-03 09:32:07 -05:00

..

sdcard_loop

loop_sdcard: Add loopable SD card file sections

2021-05-26 11:57:57 -04:00

bed_screws.cfg

test: Update test case to not use pin_map

2021-10-24 21:11:53 -04:00

bed_screws.test

…

bltouch.cfg

test: Update test case to not use pin_map

2021-10-24 21:11:53 -04:00

bltouch.test

…

commands.test

extruder: Allow dynamic adjustment of pressure advance (#6635)

2024-07-11 14:43:21 -04:00

delta_calibrate.cfg

test: Update test case to not use pin_map

2021-10-24 21:11:53 -04:00

delta_calibrate.test

…

delta.test

…

dual_carriage.cfg

idex_modes: Improved restoring position in RESTORE_DUAL_CARRIAGE_STATE

2024-08-03 14:40:52 -04:00

dual_carriage.test

idex_modes: Improved restoring position in RESTORE_DUAL_CARRIAGE_STATE

2024-08-03 14:40:52 -04:00

exclude_object.cfg

exclude_objects: initial implementation

2022-06-03 14:12:04 -04:00

exclude_object.test

exclude_objects: initial implementation

2022-06-03 14:12:04 -04:00

extruders.cfg

extruder_stepper: Do not default to synching with "extruder" at startup

2022-03-04 13:38:59 -05:00

extruders.test

extruder: Add new SYNC_EXTRUDER_MOTION command

2022-02-10 13:24:21 -05:00

gcode_arcs.cfg

test: Update test case to not use pin_map

2021-10-24 21:11:53 -04:00

gcode_arcs.test

gcode_arcs: Allow either one of I, J, K to be default-zero on G2/G3 (#5939)

2022-12-14 12:06:11 -05:00

hybrid_corexy_dual_carriage.cfg

test: Regression test for hybrid corexy input shaping with dual carriage

2023-06-06 20:17:49 -04:00

hybrid_corexy_dual_carriage.test

test: Regression test for hybrid corexy input shaping with dual carriage

2023-06-06 20:17:49 -04:00

input_shaper.cfg

test: Add mpu9250 to input_shaper.test regression test case

2022-06-20 12:41:24 -04:00

input_shaper.test

test: Add an input_shaper module test case

2021-10-26 20:01:33 -04:00

led.cfg

test: Add an led test for led, neopixel, dotstar, pca9533, pca9632 configs

2022-03-31 13:08:12 -04:00

led.test

test: Add an led test for led, neopixel, dotstar, pca9533, pca9632 configs

2022-03-31 13:08:12 -04:00

linuxtest.cfg

linuxtest: Add a test case for the ds18b20 sensor

2022-06-08 18:06:12 -04:00

linuxtest.test

linuxtest: Add a test case for the ds18b20 sensor

2022-06-08 18:06:12 -04:00

load_cell.cfg

hx71x: Avoid base classes to improve python2 compatibility

2024-09-12 13:15:01 -04:00

load_cell.test

hx71x: Avoid base classes to improve python2 compatibility

2024-09-12 13:15:01 -04:00

macros.cfg

test: Update test case to not use pin_map

2021-10-24 21:11:53 -04:00

macros.test

…

manual_stepper.cfg

test: Update test case to not use pin_map

2021-10-24 21:11:53 -04:00

manual_stepper.test

test: Rename atmega2560-16mhz.config to atmega2560.config

2019-03-22 12:36:18 -04:00

move.gcode

…

multi_z.cfg

test: Update test case to not use pin_map

2021-10-24 21:11:53 -04:00

multi_z.test

…

out_of_bounds.test

docs: Move config reference information to new Config_Reference.md

2020-11-18 20:10:21 -05:00

polar.test

…

pressure_advance.cfg

extruder: Allow dynamic adjustment of pressure advance (#6635)

2024-07-11 14:43:21 -04:00

pressure_advance.test

extruder: Allow dynamic adjustment of pressure advance (#6635)

2024-07-11 14:43:21 -04:00

printers.test

config: Config for Geeetech A-series printers: A10/M/T and A20/M/T (#6767)

2025-01-03 09:32:07 -05:00

pwm.cfg

pwm_cycle_time: New module for output pins with dynamic cycle times

2024-01-23 20:04:03 -05:00

pwm.test

pwm_cycle_time: New module for output pins with dynamic cycle times

2024-01-23 20:04:03 -05:00

quad_gantry_level.test

…

rotary_delta_calibrate.cfg

test: Update test case to not use pin_map

2021-10-24 21:11:53 -04:00

rotary_delta_calibrate.test

rotary_delta: Initial support for rotary delta kinematics

2020-01-06 11:52:42 -05:00

screws_tilt_adjust.cfg

test: Update test case to not use pin_map

2021-10-24 21:11:53 -04:00

screws_tilt_adjust.test

screws_tilt_adjust: Add MAX_DEVIATION parameter for bed level invariant.

2021-04-28 11:53:18 -04:00

sdcard_loop.cfg

test: Update test case to not use pin_map

2021-10-24 21:11:53 -04:00

sdcard_loop.test

loop_sdcard: Add loopable SD card file sections

2021-05-26 11:57:57 -04:00

temperature.cfg

temperature_combined: A class that can combine several other temperature sensors (#6230)

2023-08-01 13:18:03 -04:00

temperature.test

…

tmc.cfg

tmc2240: initial implementation

2023-03-01 20:43:53 -05:00

tmc.test

tmc2240: initial implementation

2023-03-01 20:43:53 -05:00

z_tilt.cfg

test: Update test case to not use pin_map

2021-10-24 21:11:53 -04:00

z_tilt.test

…

z_virtual_endstop.cfg

test: Update test case to not use pin_map

2021-10-24 21:11:53 -04:00

z_virtual_endstop.test

…