CreatBotKlipper

History

Kevin O'Connor 3b4088c23f chipmisc: Add support for Replicape board

Add support for configuring and controlling the hardware specific to
the revision "B3" Replicape board.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

2017-09-20 13:18:07 -04:00

img

docs: Kinematics document image updates

2017-04-27 12:00:09 -04:00

prints

docs: Add initial Pressure Advance tuning document

2017-04-19 16:02:11 -04:00

beaglebone.md

chipmisc: Add support for Replicape board

2017-09-20 13:18:07 -04:00

Code_Overview.md

stepcompress: Implement print time to clock conversion in C code

2017-09-19 17:25:43 -04:00

Debugging.md

avr: Add SIMULAVR build option; don't show WATCHDOG or SERIAL_BAUD_U2X

2017-05-28 11:04:59 -04:00

Features.md

pru: Compile the irq_poll() function with -O2 optimization

2017-08-15 11:05:30 -04:00

Installation.md

docs: Make it clear a RESTART is likely needed in Installation document

2017-05-03 11:15:27 -04:00

Kinematics.md

toolhead: Permit look-ahead between Z moves

2017-09-03 15:46:48 -04:00

MCU_Commands.md

docs: Remove documentation for "custom" command blocks

2017-08-26 18:27:21 -04:00

Overview.md

docs: Improve documentation for those starting in docs/

2017-04-27 16:05:26 -04:00

Pressure_Advance.md

docs: Note how to handle odd corner in Pressure_Advance.md

2017-05-25 13:39:16 -04:00

Protocol.md

docs: Use only single space at start of new sentence

2017-05-01 11:58:32 -04:00

README.md

docs: Improve documentation for those starting in docs/

2017-04-27 16:05:26 -04:00

Releases.md

docs: Note version 0.4.0 release

2017-05-03 14:32:36 -04:00

Todo.md

docs: Remove documentation for "custom" command blocks

2017-08-26 18:27:21 -04:00

README.md

Welcome to the Klipper documentation. The overview document is a good starting point.