Kevin O'Connor d94c856118 display: Allow the ST7920_DISPLAY parameter to be configured ...

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

2018-06-21 09:58:35 -04:00

..

chelper

itersolve: Move tracking of commanded position to itersolve code

2018-06-20 09:26:10 -04:00

extras

display: Allow the ST7920_DISPLAY parameter to be configured

2018-06-21 09:58:35 -04:00

cartesian.py

cartesian: Convert cartesian kinematics to use the iterative solver

2018-06-20 09:26:10 -04:00

clocksync.py

clocksync: Simplify is_active() check

2018-05-31 18:20:30 -04:00

console.py

console: Report timestamp on each read message

2018-05-21 12:01:26 -04:00

corexy.py

corexy: Convert corexy to use the iterative solver

2018-06-20 09:26:10 -04:00

delta.py

delta: Convert delta kinematics to use iterative solver

2018-06-20 09:26:10 -04:00

extruder.py

extruder: Convert to using iterative solver

2018-06-20 09:26:10 -04:00

gcode.py

klippy: Return an error code if batch input results in an error

2018-06-16 16:18:01 -04:00

heater.py

temperature_fan: Add support for temperature-triggered fan.

2018-05-10 19:32:23 -04:00

homing.py

homing: Apply speed rounding after calling home_prepare()

2018-05-14 11:40:35 -04:00

klippy.py

klippy: try_load_module() should return the module loaded

2018-06-20 09:26:10 -04:00

mathutil.py

mathutil: Move coordinate_descent() to new file

2018-03-04 09:56:50 -05:00

mcu.py

itersolve: Move tracking of commanded position to itersolve code

2018-06-20 09:26:10 -04:00

msgproto.py

msgproto: Add support for a get_constant_int() method

2018-05-28 10:43:40 -04:00

parsedump.py

build: Request python2 for all directly executed python binaries

2017-06-27 20:26:02 -04:00

pins.py

lpc176x: Add support for GPIO pins

2018-05-25 11:52:13 -04:00

queuelogger.py

klippy: Automatically clear rollover_info on each restart

2018-04-03 13:18:52 -04:00

reactor.py

reactor: Fix bug causing end() to not always work

2017-04-13 13:20:13 -04:00

serialhdl.py

serialqueue: Limit message transmission to available receive buffer size

2018-05-28 11:12:30 -04:00

stepper.py

kin_cartesian: Remove stepcompress_push_const()

2018-06-20 09:26:10 -04:00

toolhead.py

toolhead: Add support for the M204 command

2018-06-15 12:05:45 -04:00

util.py

util: Change the /tmp/printer pty to be group readable

2018-05-16 13:25:21 -04:00