Kevin O'Connor 8a830ff0ce chelper: Compile with gcc -fwhole-program option ...

Use the -fwhole-program option when compiling the host C code.  This
makes it easier to support inlining across C files.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

2018-06-20 09:26:10 -04:00

..

chelper

chelper: Compile with gcc -fwhole-program option

2018-06-20 09:26:10 -04:00

extras

stepper_buzz: Move STEPPER_BUZZ command from stepper.py to new file

2018-06-20 09:26:10 -04:00

cartesian.py

gcode: Add minval/maxval/above/below options to get_X parsers

2018-04-20 22:24:36 -04:00

clocksync.py

clocksync: Simplify is_active() check

2018-05-31 18:20:30 -04:00

console.py

console: Report timestamp on each read message

2018-05-21 12:01:26 -04:00

corexy.py

homing_override: Allow moves prior to homing an axis

2018-01-28 12:19:26 -05:00

delta.py

stepper: Raise an error if position_endstop is not in min/max range

2018-05-18 19:41:03 -04:00

extruder.py

extruder: Report max_extrude_ratio in log

2018-06-05 20:48:55 -04:00

gcode.py

klippy: Return an error code if batch input results in an error

2018-06-16 16:18:01 -04:00

heater.py

temperature_fan: Add support for temperature-triggered fan.

2018-05-10 19:32:23 -04:00

homing.py

homing: Apply speed rounding after calling home_prepare()

2018-05-14 11:40:35 -04:00

klippy.py

klippy: try_load_module() should return the module loaded

2018-06-20 09:26:10 -04:00

mathutil.py

mathutil: Move coordinate_descent() to new file

2018-03-04 09:56:50 -05:00

mcu.py

mcu: config_reset_cmd typo fixed

2018-06-01 09:49:55 -04:00

msgproto.py

msgproto: Add support for a get_constant_int() method

2018-05-28 10:43:40 -04:00

parsedump.py

…

pins.py

lpc176x: Add support for GPIO pins

2018-05-25 11:52:13 -04:00

queuelogger.py

klippy: Automatically clear rollover_info on each restart

2018-04-03 13:18:52 -04:00

reactor.py

…

serialhdl.py

serialqueue: Limit message transmission to available receive buffer size

2018-05-28 11:12:30 -04:00

stepper.py

stepper_buzz: Move STEPPER_BUZZ command from stepper.py to new file

2018-06-20 09:26:10 -04:00

toolhead.py

toolhead: Add support for the M204 command

2018-06-15 12:05:45 -04:00

util.py

util: Change the /tmp/printer pty to be group readable

2018-05-16 13:25:21 -04:00