CreatBotKlipper

History

Kevin O'Connor 90827a88de docs: Minor wording change to step_distance FAQ

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

2019-01-27 16:52:16 -05:00

img

docs: Add Delta_Calibrate.md guide with "enhanced delta calibration"

2018-09-25 13:48:46 -04:00

prints

delta_calibrate: Initial support for enhanced delta calibration

2018-09-25 13:48:46 -04:00

beaglebone.md

pru: Disable ADC reading directly from the PRU

2018-06-27 12:10:25 -04:00

BLTouch.md

docs: Improve the BLTouch documentation (#1107 )

2019-01-25 12:53:00 -05:00

Bootloaders.md

samd21: Add support for flashing an application via the bossac tool

2018-11-30 22:22:42 -05:00

Code_Overview.md

docs: Update Code_Overview.md with removal of printer_state() callback

2019-01-08 11:34:09 -05:00

Config_Changes.md

i2ccmds: Pass the i2c address as a 7-bit number (0-127)

2019-01-07 20:00:44 -05:00

Config_checks.md

docs: Add a Slicers.md document

2018-10-28 10:47:32 -04:00

Contact.md

docs: Expand on why it is important to provide the log in Contact.md

2018-07-08 20:30:35 -04:00

CONTRIBUTING.md

docs: Add a CONTRIBUTING document

2017-12-24 12:33:01 -05:00

Debugging.md

docs: Sort command dispatch table by transfer rate

2019-01-20 14:17:08 -05:00

Delta_Calibrate.md

delta_calibrate: Do not automatically run G28 on DELTA_CALIBRATE

2018-10-22 11:26:01 -04:00

developer-certificate-of-origin

docs: Add a CONTRIBUTING document

2017-12-24 12:33:01 -05:00

Endstop_Phase.md

docs: Minor rewording in Endstop_Phase.md

2018-11-14 09:46:21 -05:00

FAQ.md

docs: Minor wording change to step_distance FAQ

2019-01-27 16:52:16 -05:00

Features.md

docs: Add sam4s8c benchmarks

2019-01-07 19:43:56 -05:00

G-Codes.md

docs: Bltouch documentation (#1073 )

2019-01-05 20:24:35 -05:00

Installation.md

Kconfig: Move SERIAL_BAUD to src/Kconfig and show with LOW_LEVEL_OPTIONS

2019-01-25 18:02:03 -05:00

issue_template.md

docs: Add github issue template

2018-01-31 14:30:05 -05:00

Kinematics.md

docs: Minor change to wording of junction speeds

2018-08-03 15:48:07 -04:00

MCU_Commands.md

basecmd: Rename get_status to get_clock

2018-05-29 10:57:29 -04:00

Overview.md

docs: Add a new Config_Changes.md document

2019-01-07 20:00:44 -05:00

Packaging.md

util: Fix versioning when gitdir is absent (#809 )

2018-10-27 10:44:38 -04:00

Pressure_Advance.md

docs: Update pressure advance doc to note it only impacts the extruder

2018-10-25 19:09:47 -04:00

Protocol.md

docs: Replace get_status example with get_clock in Protocol.md

2018-10-20 11:53:32 -04:00

README.md

docs: Improve documentation for those starting in docs/

2017-04-27 16:05:26 -04:00

Releases.md

docs: Update release notes for v0.7.0 release

2018-12-20 09:15:24 -05:00

Sensorless_Homing.md

docs: Add guide for sensorless homing (#1004 )

2019-01-07 10:39:16 -05:00

Slicers.md

docs: Add a Slicers.md document

2018-10-28 10:47:32 -04:00

stm32f1.md

docs: Update stm32f1.md - usb is now supported.

2018-10-22 13:22:58 -04:00

README.md

Welcome to the Klipper documentation. The overview document is a good starting point.