CreatBotKlipper

History

Kevin O'Connor a878831d5e mcp4728: Update to better match printrbot revf requirements

Reported by @Grumps49.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

2019-07-26 11:02:56 -04:00

_layouts

docs: Fix markdown table layout in html rendering

2019-04-18 22:56:56 -04:00

img

skew_correction: add documentation

2019-06-26 20:16:35 -04:00

prints

…

_config.yml

docs: Fix inclusion of CONTRIBUTING.md in the automatic html generation

2019-04-18 23:10:32 -04:00

beaglebone.md

…

Bed_Level.md

docs: Minor wording change to Bed_Level.md

2019-05-23 19:31:44 -04:00

Benchmarks.md

docs: Add initial STM32F446 benchmark results

2019-07-25 18:18:42 -04:00

BLTouch.md

docs: Improve bltouch v3 documentation

2019-05-26 11:09:32 -04:00

Bootloaders.md

docs: Add information on using OpenOCD to Bootloaders.md

2019-07-09 13:37:17 -04:00

CNAME

docs: Fixup github pages

2019-04-14 22:41:23 -04:00

Code_Overview.md

…

Command_Templates.md

docs: Add documentation for [delayed_gcode]

2019-07-01 11:09:30 -04:00

Config_Changes.md

mcp4728: Update to better match printrbot revf requirements

2019-07-26 11:02:56 -04:00

Config_checks.md

docs: Add Bed_Level.md and Probe_Calibrate.md documents

2019-02-12 13:20:32 -05:00

Contact.md

…

CONTRIBUTING.md

docs: Add a CONTRIBUTING document

2017-12-24 12:33:01 -05:00

Debugging.md

docs: Add information on running the regression suite locally

2019-06-23 17:59:23 -04:00

Delta_Calibrate.md

docs: Update Delta_Calibrate.md with probe location bias info

2019-06-06 10:08:58 -04:00

developer-certificate-of-origin

…

Endstop_Phase.md

…

FAQ.md

docs: Update FAQ to reference Bootloaders.md on "make flash" failure

2019-07-22 10:07:34 -04:00

Features.md

docs: Note tmc2209 and tmc5160 support in Features.md

2019-06-23 12:28:39 -04:00

G-Codes.md

neopixel: Add support for daisy-chained chips

2019-07-23 21:59:38 -04:00

Installation.md

docs: Recommend OctoPrint 1.3.11 or later

2019-05-20 23:01:04 -04:00

issue_template.md

…

Kinematics.md

docs: Minor change to wording of junction speeds

2018-08-03 15:48:07 -04:00

Manual_Level.md

docs: Try to be more clear that the "paper test" steps need to be run

2019-05-24 22:44:00 -04:00

MCU_Commands.md

endstop: Rename mcu end_stop commands to endstop

2019-07-12 08:10:53 -04:00

Overview.md

docs: Add skew_correction.md to Overview.md

2019-06-27 09:50:17 -04:00

Packaging.md

…

Pressure_Advance.md

docs: Update pressure advance doc to note it only impacts the extruder

2018-10-25 19:09:47 -04:00

Probe_Calibrate.md

docs: Update Probe_Calibrate.md with information on common probe errors

2019-06-06 10:08:58 -04:00

Protocol.md

docs: Update Protocol.md to use enumerations for pins

2019-07-09 14:17:28 -04:00

README.md

docs: Improve documentation for those starting in docs/

2017-04-27 16:05:26 -04:00

Releases.md

docs: Update release notes for v0.7.0 release

2018-12-20 09:15:24 -05:00

Sensorless_Homing.md

Update sensorless homing documentation to disable second home

2019-03-19 10:55:59 -04:00

skew_correction.md

docs: Update for latest changs to skew_correction

2019-06-29 10:58:46 -04:00

Slicers.md

docs: Warn against using "PreloadVE" on KISSlicer

2019-06-23 12:18:24 -04:00

stm32f0_CAN.md

…

stm32f1.md

…

TSL1401CL_Filament_Width_Sensor.md

…

README.md

Welcome to the Klipper documentation. The overview document is a good starting point.