CreatBotKlipper

Go to file

Kevin O'Connor bddefdde36 pid_calibrate: Fix PID_CALIBRATE command when used with heater_generic

Make sure the SAVE_CONFIG command saves the calculated PID parameters
to the correct config name.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

2024-03-13 21:41:04 -04:00

.github

github: Temporarily disable close_reviewer_needed automation

2023-12-05 17:57:11 -05:00

config

toolhead: Replace max_accel_to_decel with minimum_cruise_ratio

2024-03-13 21:31:37 -04:00

docs

toolhead: Replace max_accel_to_decel with minimum_cruise_ratio

2024-03-13 21:31:37 -04:00

klippy

pid_calibrate: Fix PID_CALIBRATE command when used with heater_generic

2024-03-13 21:41:04 -04:00

lib

…

scripts

scripts: Added shaper tuning parameters to calibrate_shaper script

2024-02-16 19:20:56 -05:00

src

stm32: Fix USART3 ALT pinout on STM32G0 (#6523 )

2024-03-10 18:48:48 -04:00

test

pwm_cycle_time: New module for output pins with dynamic cycle times

2024-01-23 20:04:03 -05:00

.gitignore

…

COPYING

…

Makefile

…

README.md

docs: Add a Sponsors.md file

2022-07-16 10:48:10 -04:00

README.md

Welcome to the Klipper project!

https://www.klipper3d.org/

Klipper is a 3d-Printer firmware. It combines the power of a general purpose computer with one or more micro-controllers. See the features document for more information on why you should use Klipper.

To begin using Klipper start by installing it.

Klipper is Free Software. See the license or read the documentation. We depend on the generous support from our sponsors.