CreatBotKlipper

Go to file

Arne Jansen ce35ee45d6 stm32: fix spi_transfer for stm32f0

The current code accesses the DR as 32 bit. This enabled data packing mode,
effectively adding a 00 byte between each sent byte. The receive side had
similar problems.
To prevent this, all accesses are 8 bit now, even though this is not
necessary on stmf[14].

Signed-off-by: Arne Jansen <arne@die-jansens.de>

2020-01-23 11:10:39 -05:00

config

config: Adding a config file for the monoprice mini delta (#2392 )

2020-01-14 10:33:38 -05:00

docs

docs: Update Config_Changes.md with actual bed_mesh merge date

2020-01-09 14:17:51 -05:00

klippy

heater: add support for BME280

2020-01-13 22:29:50 -05:00

lib

stm32f0: Remove hal based stm32f0 implementation

2020-01-14 17:08:01 -05:00

scripts

scripts: Install "virtualenv setuptools==44.0.0" in install-octopi.sh

2020-01-12 18:22:14 -05:00

src

stm32: fix spi_transfer for stm32f0

2020-01-23 11:10:39 -05:00

test

stm32f0: Remove hal based stm32f0 implementation

2020-01-14 17:08:01 -05:00

.gitignore

util: Fix versioning when gitdir is absent (#809 )

2018-10-27 10:44:38 -04:00

.travis.yml

test: Update .travis.yml to list apt packages one per line

2018-08-17 09:47:57 -04:00

COPYING

Initial commit of source code.

2016-05-25 11:37:40 -04:00

Makefile

Makefile: Use "tr -s" in compile_time_request.txt generation

2019-08-22 11:40:02 -04:00

README.md

docs: Update main README file to point to website

2019-04-20 13:43:35 -04:00

README.md

Welcome to the Klipper project!

https://www.klipper3d.org/

Klipper is a 3d-Printer firmware. It combines the power of a general purpose computer with one or more micro-controllers. See the features document for more information on why you should use Klipper.

To begin using Klipper start by installing it.

Klipper is Free Software. See the license or read the documentation.