CreatBotKlipper

History

Kevin O'Connor 08444a8b89 docs: Try to make the klippy.log bug reporting more clear

Emphasize that the log file needs to be attached to the issue.
Encourage M112 to be issued on every bug report.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

2018-01-21 13:08:31 -05:00

img

docs: Try to make the klippy.log bug reporting more clear

2018-01-21 13:08:31 -05:00

prints

docs: Minor update to square.scad

2018-01-02 21:56:29 -05:00

beaglebone.md

docs: Point to beaglebone.md from the main installation document

2017-10-11 21:03:13 -04:00

Code_Overview.md

docs: Add a section on time handling to Code_Overview.md

2017-09-27 15:11:15 -04:00

Config_checks.md

docs: Add an initial configuration checklist document

2017-12-26 20:54:37 -05:00

Contact.md

docs: Try to make the klippy.log bug reporting more clear

2018-01-21 13:08:31 -05:00

CONTRIBUTING.md

docs: Add a CONTRIBUTING document

2017-12-24 12:33:01 -05:00

Debugging.md

docs: Update Debugging.md with information on logextract

2018-01-11 13:48:40 -05:00

developer-certificate-of-origin

docs: Add a CONTRIBUTING document

2017-12-24 12:33:01 -05:00

FAQ.md

docs: Add a FAQ item on steps to upgrade the software

2018-01-12 18:38:49 -05:00

Features.md

docs: Reword performance paragraph in Features.md

2017-09-27 13:59:47 -04:00

Installation.md

docs: Update installation document with pointers to FAQ

2018-01-04 13:29:17 -05:00

Kinematics.md

toolhead: Permit look-ahead between Z moves

2017-09-03 15:46:48 -04:00

MCU_Commands.md

gpiocmds: Allow the start value for a pin to differ from the default_value

2017-10-12 11:59:27 -04:00

Overview.md

docs: Add an initial configuration checklist document

2017-12-26 20:54:37 -05:00

Pressure_Advance.md

docs: Note pressure_advance over 0.20 is unlikely to improve quality

2018-01-08 11:07:26 -05:00

Protocol.md

docs: Use only single space at start of new sentence

2017-05-01 11:58:32 -04:00

README.md

docs: Improve documentation for those starting in docs/

2017-04-27 16:05:26 -04:00

Releases.md

docs: Note version 0.5.0 release

2017-10-25 11:27:20 -04:00

Todo.md

stepper: Automatically detect and handle shared stepper enable lines

2018-01-10 19:10:26 -05:00

README.md

Welcome to the Klipper documentation. The overview document is a good starting point.