Kevin O'Connor d02c80ef08 output_pin: Make sure to not use a cycle_time or max_duration over 5 seconds ...

Times longer than 5 seconds may result in a 32bit ticks overflow in
the micro-controller (for fast micro-controllers).

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

2021-03-26 11:37:40 -04:00

..

chelper

stepcompress: Add support for tracking history of queue_step commands

2021-03-13 15:19:43 -05:00

extras

output_pin: Make sure to not use a cycle_time or max_duration over 5 seconds

2021-03-26 11:37:40 -04:00

kinematics

extruder: Support looking up an extruder position from a past time

2021-03-13 15:19:43 -05:00

clocksync.py

…

configfile.py

configfile: Add printer.configfile.settings command template parameter

2021-01-20 16:25:25 -05:00

console.py

console: Add support for connecting via CAN bus

2021-03-13 11:29:41 -05:00

gcode.py

gcode: Move definition of CommandError and Coord from homing.py to gcode.py

2021-01-08 12:07:45 -05:00

klippy.py

klippy: Fix check for duplicate objects

2021-03-05 13:59:20 -05:00

mathutil.py

…

mcu.py

mcu: Update hints for "Timer too close" and "No next step" errors

2021-03-19 08:35:21 -04:00

msgproto.py

buildcommands: Extend number of available mcu messages from 96 to 128

2021-02-18 15:21:32 -05:00

parsedump.py

…

pins.py

…

queuelogger.py

…

reactor.py

reactor: Record time of recent gc collection sweeps

2020-09-17 02:06:20 -04:00

serialhdl.py

serialhdl: Only load the CAN module if CAN bus is configured

2021-03-13 15:02:41 -05:00

stepper.py

stepcompress: Add support for tracking history of queue_step commands

2021-03-13 15:19:43 -05:00

toolhead.py

homing: Make homing.py an "extras" module

2021-01-08 14:01:34 -05:00

util.py

…

webhooks.py

webhooks: Fix use of deprecated Exception.message attribute (#3781)

2021-01-17 22:37:41 -05:00