CreatBotKlipper/docs at d1da6100a6ce3cf832397953a852b2027b648b25 - CreatBotKlipper - CreatBot Git Repository

CreatBot/CreatBotKlipper

History

Kevin O'Connor f15cd62587 docs: Update Pressure_Advance.md document

Update the document to recommend tuning with decreased acceleration
and with square_corner_velocity disabled. Using this approach makes it
possible to test with significantly higher pressure advance values.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

2018-09-11 12:00:43 -04:00

..

…

…

beaglebone.md

pru: Disable ADC reading directly from the PRU

2018-06-27 12:10:25 -04:00

Bootloaders.md

docs: Update Bootloaders.md with AVR lfuse hints

2018-08-27 12:34:37 -04:00

Code_Overview.md

…

Config_checks.md

…

Contact.md

…

CONTRIBUTING.md

…

Debugging.md

…

developer-certificate-of-origin

…

FAQ.md

docs: Minor rewording of Marlin pin number section of FAQ

2018-08-26 23:06:32 -04:00

Features.md

docs: Note digipot support in Features.md

2018-09-03 21:10:53 -04:00

G-Codes.md

docs: Add Mesh Bed Leveling to G-Codes.md

2018-08-17 09:22:55 -04:00

Installation.md

docs: Update main documentation to not Smoothieboard support

2018-07-08 11:01:54 -04:00

issue_template.md

…

Kinematics.md

…

MCU_Commands.md

…

Overview.md

docs: Add a Bootloaders.md document

2018-08-08 20:47:04 -04:00

Pressure_Advance.md

docs: Update Pressure_Advance.md document

2018-09-11 12:00:43 -04:00

Protocol.md

…

README.md

docs: Improve documentation for those starting in docs/

2017-04-27 16:05:26 -04:00

Releases.md

docs: Update release notes for v0.6.0 release

2018-03-31 14:04:39 -04:00

stm32f1.md

…

README.md

Welcome to the Klipper documentation. The overview document is a good starting point.