Alec B. Plumb daadb36cb4 gcode_button: Execute gcode when a button is pressed or released (#1745) ...

An extra to execute gcode when a hardware button is pressed or released. Uses the jinja2 templating system.

Inspired by pull request #545 from Miguel Moitinho miguel@moitinho.net and pull request #1098 from Paulo Drugos paulodrugos@gmail.com

Signed-off-by: Alec Plumb <alec@etherwalker.com>

2019-06-21 18:06:31 -04:00

..

avrsim.cfg

…

example-corexy.cfg

…

example-delta.cfg

probe: Move multi-sampling capability from ProbePointsHelper to Probe

2019-06-06 10:08:58 -04:00

example-extras.cfg

gcode_button: Execute gcode when a button is pressed or released (#1745)

2019-06-21 18:06:31 -04:00

example-menu.cfg

…

example-multi-mcu.cfg

…

example-polar.cfg

…

example-winch.cfg

…

example.cfg

thermistor: Add support for printers with an "inline_resistor"

2019-06-02 10:59:23 -04:00

generic-azteeg-x5-mini-v3.cfg

config: Clarify which boards use lpc1768 vs lpc1769 when known

2019-06-20 11:23:30 -04:00

generic-bigtreetech-skr-v1.1.cfg

config: Clarify which boards use lpc1768 vs lpc1769 when known

2019-06-20 11:23:30 -04:00

generic-bigtreetech-skr-v1.3.cfg

config: Clarify which boards use lpc1768 vs lpc1769 when known

2019-06-20 11:23:30 -04:00

generic-cramps.cfg

…

generic-duet2-maestro.cfg

config: Add LCD settings to config/generic-duet2-maestro.cfg

2019-06-13 11:29:55 -04:00

generic-duet2.cfg

atsam: Use enumerations for buses and reserve pins

2019-04-04 18:29:31 -04:00

generic-einsy-rambo.cfg

…

generic-fysetc-f6.cfg

config: Force PB0 high in fysetc f6 config

2019-05-24 18:07:41 -04:00

generic-gt2560.cfg

…

generic-melzi.cfg

…

generic-mini-rambo.cfg

…

generic-minitronics1.cfg

…

generic-printrboard.cfg

config: Reduce the stepper current in the example printrboard config

2019-03-14 10:44:02 -04:00

generic-radds.cfg

…

generic-rambo.cfg

…

generic-ramps.cfg

…

generic-re-arm.cfg

config: Clarify which boards use lpc1768 vs lpc1769 when known

2019-06-20 11:23:30 -04:00

generic-replicape.cfg

replicape: add support for Linux hardware PWM (#1443)

2019-04-06 13:51:51 -04:00

generic-rumba.cfg

config: Update extra extruder pins in generic-rumba.cfg

2019-03-14 11:48:25 -04:00

generic-smoothieboard.cfg

lpc176x: Add support for flashing via "make flash"

2019-03-08 22:22:41 -05:00

kit-voron2-250mm.cfg

probe: Move multi-sampling capability from ProbePointsHelper to Probe

2019-06-06 10:08:58 -04:00

kit-zav3d-2019.cfg

probe: Move multi-sampling capability from ProbePointsHelper to Probe

2019-06-06 10:08:58 -04:00

printer-adimlab-2018.cfg

…

printer-anet-a8-2017.cfg

config: Add button support for anet a8

2019-04-19 10:43:22 -04:00

printer-anet-e10-2018.cfg

…

printer-anycubic-4max-2018.cfg

config: Added Anycubic 4Max printer config file

2019-03-22 13:02:01 -04:00

printer-anycubic-i3-mega-2017.cfg

…

printer-anycubic-kossel-2016.cfg

…

printer-anycubic-kossel-plus-2017.cfg

…

printer-creality-cr10-2017.cfg

config: Use "ATC Semitec 104GT-2" for CR10 (and similar) heater beds

2019-02-08 12:20:16 -05:00

printer-creality-cr10mini-2017.cfg

config: Use "ATC Semitec 104GT-2" for CR10 (and similar) heater beds

2019-02-08 12:20:16 -05:00

printer-creality-cr10s-2017.cfg

config: Use "ATC Semitec 104GT-2" for CR10 (and similar) heater beds

2019-02-08 12:20:16 -05:00

printer-creality-cr20-2018.cfg

…

printer-creality-ender2-2017.cfg

config: Use consistent advice on flashing the Melzi board

2018-11-13 14:32:52 -05:00

printer-creality-ender3-2018.cfg

…

printer-creality-ender5-2019.cfg

config: Add Creality Ender 5 2019

2019-05-01 15:25:42 -04:00

printer-lulzbot-taz6-2017.cfg

…

printer-makergear-m2-2012.cfg

…

printer-micromake-d1-2016.cfg

…

printer-seemecnc-rostock-max-v2-2015.cfg

…

printer-tevo-flash-2018.cfg

probe: Move multi-sampling capability from ProbePointsHelper to Probe

2019-06-06 10:08:58 -04:00

printer-tronxy-x5s-2018.cfg

config: Add buttons to printer-tronxy-x5s-2018.cfg

2019-03-01 00:09:30 -05:00

printer-tronxy-x8-2018.cfg

…

printer-velleman-k8200-2013.cfg

…

printer-wanhao-duplicator-6-2016.cfg

…

printer-wanhao-duplicator-i3-plus-2017.cfg

…

printer-wanhao-duplicator-i3-plus-mark2-2019.cfg

config: Create printer-wanhao-duplicator-i3-plus-mark2-2019.cfg

2019-06-18 10:13:41 -04:00

printer-wanhao-duplicator-i3-v2.1-2017.cfg

…

sample-macros.cfg

config: Update M600 in sample-macros.cfg to use SAVE_GCODE_STATE

2019-05-31 10:29:09 -04:00

sample-probe-as-z-endstop.cfg

config: Fix G90 use in sample-probe-as-z-endstop.cfg

2019-06-07 10:37:10 -04:00