Kevin O'Connor f8acf0f54f delta: Default stepper_b/c position_endstop to stepper_a's ...

If the position_endstop is not set for stepper_b or stepper_c then use
the value from stepper_a.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

2017-12-08 18:20:04 -05:00

..

avrsim.cfg

heater: Rename thermistor_type config name to sensor_type

2017-03-13 00:46:33 -04:00

example-corexy.cfg

stepper: Use a sane default for homing_positive_dir

2017-07-24 14:31:46 -04:00

example-delta.cfg

delta: Default stepper_b/c position_endstop to stepper_a's

2017-12-08 18:20:04 -05:00

example-extras.cfg

stepper: Support for multiple steppers controlling a single axis

2017-11-18 17:37:04 -05:00

example.cfg

stepper: Only align the stepper motor to a full step when requested

2017-12-07 17:35:19 -05:00

generic-cramps.cfg

config: Warn Beaglebone PRU users that pinmux settings are not updated

2017-10-25 11:01:36 -04:00

generic-melzi.cfg

config: Add generic-melzi.cfg file for Melzi boards

2017-10-12 12:43:13 -04:00

generic-printrboard.cfg

config: Add a generic-printrboard.cfg file

2017-10-30 10:56:08 -04:00

generic-rambo.cfg

config: List E1 micro-step pins in order in generic-rambo.cfg

2017-11-08 11:14:37 -05:00

generic-ramps.cfg

stepper: Use a sane default for homing_positive_dir

2017-07-24 14:31:46 -04:00

generic-replicape.cfg

config: Warn Beaglebone PRU users that pinmux settings are not updated

2017-10-25 11:01:36 -04:00

makergear-m2-2012.cfg

chipmisc: Add support for configuring ad5206 digipots

2017-08-26 18:27:21 -04:00