CreatBotKlipper

History

shiftingtech 8443c0b0f8 docs: a slight clarity improvement for the rPi mcu

Just a small attempt to make the build process slightly clearer 
In the compilation instructions for the rPi mcu

Signed-off-by: Ben Eastep <shifting@shifting.ca>

2021-05-02 13:07:07 -04:00

_layouts

docs: Add indentation to generated table-of-contents on klipper3d.org site

2020-12-03 19:24:40 -05:00

img

docs: document bed mesh "faulty_regions"

2021-04-10 11:16:07 -04:00

prints

docs: Suggested improvements to Input Shaper tuning guide

2020-07-29 21:28:18 -04:00

_config.yml

…

API_Server.md

docs: Move status field reference to new Status_Reference.md file

2021-04-28 20:32:00 -04:00

beaglebone.md

docs: Move config reference information to new Config_Reference.md

2020-11-18 20:10:21 -05:00

Bed_Level.md

docs: Minor wording change to Bed_Level.md

2019-05-23 19:31:44 -04:00

Bed_Mesh.md

docs: document bed mesh "faulty_regions"

2021-04-10 11:16:07 -04:00

Benchmarks.md

stepper: Remove min_stop_interval from mcu code

2021-04-30 11:26:19 -04:00

BLTouch.md

bltouch: Recommend using a pullup on the sensor_pin

2020-12-11 11:01:44 -05:00

Bootloaders.md

docs: Update bootloaders.md with HID bootloader documentation

2020-05-28 14:44:51 -04:00

CANBUS_protocol.md

docs: Update CAN bus documents

2021-03-13 11:33:56 -05:00

CANBUS.md

docs: Add notes on terminating resistors to CANBUS.md

2021-04-25 15:45:24 -04:00

CNAME

docs: Fixup github pages

2019-04-14 22:41:23 -04:00

Code_Overview.md

gcode_move: Move GCodeMove class from gcode.py to new extras module

2020-08-20 21:03:22 -04:00

Command_Templates.md

docs: Move status field reference to new Status_Reference.md file

2021-04-28 20:32:00 -04:00

Config_Changes.md

toolhead: Do not limit SET_VELOCITY_LIMIT to values specified in config

2021-04-30 11:26:19 -04:00

Config_checks.md

stepper: Calculate step_distance from rotation_distance

2020-12-18 10:30:32 -05:00

Config_Reference.md

docs: Move palette2 location in Config_Reference.md

2021-04-28 20:40:24 -04:00

Contact.md

docs: Add links to Klipper Discourse server to Contact.md

2021-03-27 12:51:17 -04:00

CONTRIBUTING.md

docs: Updates to Contact.md and use of github issues

2021-01-31 19:13:47 -05:00

Debugging.md

console: Make baud an optional parameter

2021-03-02 11:38:50 -05:00

Delta_Calibrate.md

docs: Note PROBE_CALIBRATE results invalidated on motion system update

2020-10-20 19:26:24 -04:00

developer-certificate-of-origin

…

Endstop_Phase.md

endstop_phase: Obtain phases directly from stepper microsteps config

2020-12-18 10:30:32 -05:00

Example_Configs.md

docs: Note that attribution/history should be avoiding in Example_Configs.md

2021-04-13 21:14:46 -04:00

FAQ.md

docs: Update FAQ on which mcus have hard pwm support

2021-03-26 12:39:47 -04:00

Features.md

docs: Use relative links for files outside the docs/ directory

2020-12-03 15:06:58 -05:00

G-Codes.md

stepper: Remove min_stop_interval from mcu code

2021-04-30 11:26:19 -04:00

HallFilamentWidthSensor.md

hall_filament_width_sensor: Fix Flow update before next pending_position #3184 (#3198 )

2020-08-19 18:58:49 -04:00

Installation.md

docs: Use relative links for files outside the docs/ directory

2020-12-03 15:06:58 -05:00

Kinematics.md

kin_extruder: Convert pressure advance to use "weighted average"

2019-12-20 12:21:58 -05:00

Manual_Level.md

screws_tilt_adjust: Add MAX_DEVIATION parameter for bed level invariant.

2021-04-28 11:53:18 -04:00

MCU_Commands.md

stepper: Remove min_stop_interval from mcu code

2021-04-30 11:26:19 -04:00

Measuring_Resonances.md

docs: Added a note about different ADLX345 PCB designs

2021-03-20 13:24:43 -04:00

Overview.md

docs: Move status field reference to new Status_Reference.md file

2021-04-28 20:32:00 -04:00

Packaging.md

…

Pressure_Advance.md

docs: Minor wording change to Pressure_Advance.md

2021-02-08 11:46:40 -05:00

Probe_Calibrate.md

stepper: Calculate step_distance from rotation_distance

2020-12-18 10:30:32 -05:00

Protocol.md

…

README.md

docs: Improve documentation for those starting in docs/

2017-04-27 16:05:26 -04:00

Releases.md

docs: Note the release of v0.9.1

2020-10-28 10:55:21 -04:00

Resonance_Compensation.md

docs: Input Shaper and Resonances docs improvements (#3627 )

2020-12-17 17:44:46 -05:00

Rotation_Distance.md

docs: Minor reword to Rotation_Distance.md

2021-01-10 11:09:45 -05:00

RPi_microcontroller.md

docs: a slight clarity improvement for the rPi mcu

2021-05-02 13:07:07 -04:00

SDCard_Updates.md

docs: add documentation for SD Card firmware updates

2021-02-05 19:37:56 -05:00

skew_correction.md

…

Slicers.md

docs: Use relative links for files outside the docs/ directory

2020-12-03 15:06:58 -05:00

Status_Reference.md

docs: Update Status_Reference.md for better Jekyll rendering

2021-04-28 20:38:07 -04:00

TMC_Drivers.md

docs: Note stealthchop can cause overcurrent error in TMC_Drivers.md

2021-04-24 12:30:27 -04:00

TSL1401CL_Filament_Width_Sensor.md

…

Using_PWM_Tools.md

output_pin: Support setting max_duration (#3995 )

2021-03-26 11:25:09 -04:00

README.md

Welcome to the Klipper documentation. The overview document is a good starting point.