diff --git a/docs/Hardware/GPIO_35.md b/docs/Hardware/GPIO_35.md
index 8c9b4270..7d04b360 100644
--- a/docs/Hardware/GPIO_35.md
+++ b/docs/Hardware/GPIO_35.md
@@ -3,8 +3,8 @@ How i installed the 3.5" (A) type of screen on RaspberryOS Bookworm (Debian 12)
 
 ![preview](../img/hardware/rpi35a.jpg)
 
-!!! abstract
-    this is based on my own experience and it's provided for general information
+!!! abstract "Disclaimer"
+    This is based on my own experience, and it's provided for general information
     and does not constitute as advice of any kind.
 
 
@@ -70,5 +70,5 @@ add at the start or end:
 fbcon=map:11
 ```
 
-!!! warning Important
-    do not add newlines to the file,  it must be 1 line with the options separated by spaces
+!!! warning "Important"
+    Do not add newlines to the file,  it must be 1 line with the options separated by spaces
diff --git a/docs/Hardware/HDMI.md b/docs/Hardware/HDMI.md
index df8e6da2..ed233223 100644
--- a/docs/Hardware/HDMI.md
+++ b/docs/Hardware/HDMI.md
@@ -8,8 +8,8 @@ you can do this by editing the kernel commandline
 sudo nano /boot/firmware/cmdline.txt
 ```
 
-!!! tip "Important"
-    Put all parameters in cmdline.txt on the same line, do not use carriage returns.
+!!! warning "Important"
+    Do not add newlines to the file, it must be 1 line with the options separated by spaces
 
 for example:
 ```