# Macros

## Hide Macros

Macros can be completely hidden in the interface by prefixing the name with an underscore.

```ini
[gcode_macro MY_AWESOME_GCODE]
gcode:
    _MY_HELPER_CODE

[gcode_macro _MY_HELPER_CODE]
gcode:
    M300
```

`MY_AWESOME_GCODE` appears in your interface settings, but `_MY_HELPER_CODE` does not.

## Extrude Panel

### LOAD_FILAMENT / UNLOAD_FILAMENT

This macros are used in the Extrude panel `Load` and `Unload` buttons.

The selected speed in the panel is transferred as a parameter.

The following examples show how this can be used:

```ini
[gcode_macro LOAD_FILAMENT]
gcode:
    {% set speed = params.SPEED|default(300) %}
    {% set max_velocity = printer.configfile.settings['extruder'].max_extrude_only_velocity %}
    SAVE_GCODE_STATE NAME=load_state
    M300 # beep
    G91
    G92 E0
    G1 E350 F{max_velocity * 60} # fast-load
    G1 E25 F{speed} # purge
    M300
    M300
    RESTORE_GCODE_STATE NAME=load_state
```

```ini
[gcode_macro UNLOAD_FILAMENT]
gcode:
    {% set speed = params.SPEED|default(300) %}
    {% set max_velocity = printer.configfile.settings['extruder'].max_extrude_only_velocity %}
    SAVE_GCODE_STATE NAME=unload_state
    G91
    M300 # beep
    G92 E0
    G1 E25 F{speed} # purge
    G1 E-420 F{max_velocity * 60} # fast-unload
    M300
    M300
    RESTORE_GCODE_STATE NAME=unload_state
```