CreatBot/CreatBotMoonraker
6
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

power: Add HomeSeer control

Browse Source 
Signed-off-by: Mark Dietzer <git@doridian.net>
This commit is contained in:
Mark Dietzer
2021-03-11 15:54:16 -08:00
committed by Eric Callahan
parent f09cd413ca
commit a04958b1bf
2 changed files with 76 additions and 2 deletions
Download Patch File Download Diff File Expand all files Collapse all files

17
docs/configuration.md
View File

@@ -191,7 +191,8 @@ and Tasmota (via http) devices are supported.
[power device_name]
type: gpio
# The type of device. Can be either gpio, tplink_smartplug or tasmota.
# The type of device. Can be either gpio, tplink_smartplug, tasmota
# or homeseer.
# This parameter must be provided.
off_when_shutdown: False
# If set to True the device will be powered off when Klipper enters
@@ -248,7 +249,19 @@ output_id:
# If password is set but user is empty the default user "admin" will be used
# Provided an output_id (relay id) if the Shelly device supports
# more than one (default is 0).
address:
device:
user:
password:
# The above options are used for "homeseer" devices. The
# address should be a valid ip or hostname for the homeseer controller.
# "device" should be the ID of the device to control.
# To find out the ID, in the HomeSeer UI, click on the device you want to
# control (Make sure to click the sub-device that actually has On/Off
# buttons). And then go to the "status/graphics" tab and it should list
# "ID" in the "advanced information" section.
# Provide a user and password with access to "device control"
# and at least the specific device you want to control
```
Below are some potential examples: