CreatBot/GeneralKlipperScreen
7
0
Fork 0
forked from CreatBot/CreatBotKlipperScreen
Code Pull Requests Activity

更新机器的配置信息 优化外置驱动的使能延时问题 解决F430NX切头报错问题

Browse Source
This commit is contained in:
张开科 2025-01-17 16:04:57 +08:00
parent 9e1613c390
commit e88fb64ddd
3 changed files with 18 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
printer_config/D1000/base.cfg
View File

@ -357,6 +357,7 @@ z_hop_speed: 10
gcode:
SET_STEPPER_ENABLE STEPPER=stepper_x ENABLE=1
SET_STEPPER_ENABLE STEPPER=stepper_y ENABLE=1
SET_STEPPER_ENABLE STEPPER=stepper_z ENABLE=1
SET_KINEMATIC_POSITION X=500 Y=500 Z=0
[gcode_macro T0]
@ -554,6 +555,7 @@ gcode:
{% if not homing_cmd %}
SET_STEPPER_ENABLE STEPPER=stepper_x ENABLE=1
SET_STEPPER_ENABLE STEPPER=stepper_y ENABLE=1
SET_STEPPER_ENABLE STEPPER=stepper_z ENABLE=1
G4 P300
C28
_ACTIVATE_DEFAULT_EXTRUDER
@ -948,6 +950,8 @@ gcode:
{% if hotend == "extruder1" %}
{% set z_offset_total = z_offset_total + z_offset %}
{% endif %}
SET_STEPPER_ENABLE STEPPER=stepper_z ENABLE=1
G4 P300
M118 Recovery in progress, please wait
RUN_SHELL_COMMAND CMD=_POWER_LOSS_RECOVERY PARAMS="{z_height} \"{last_file}\" \"{z_offset_total}\""
SDCARD_PRINT_FILE FILENAME=.plr/"{last_file}"

8
printer_config/D600Pro2/base.cfg
View File

@ -357,6 +357,7 @@ z_hop_speed: 10
gcode:
SET_STEPPER_ENABLE STEPPER=stepper_x ENABLE=1
SET_STEPPER_ENABLE STEPPER=stepper_y ENABLE=1
SET_STEPPER_ENABLE STEPPER=stepper_z ENABLE=1
SET_KINEMATIC_POSITION X=300 Y=300 Z=0
[gcode_macro T0]
@ -411,7 +412,7 @@ gcode:
[gcode_macro PROBE_SERVO_OPEN]
gcode:
SET_SERVO SERVO=probe_servo angle=15
G4 P1000
G4 P2000
[gcode_macro PROBE_SERVO_CLOSE]
gcode:
@ -659,7 +660,7 @@ gcode:
{% set toolchange = client.change_runout|lower|default("") %}
{% set extruder_filament = client.filament_state.extruder %}
{% set extruder1_filament = client.filament_state.extruder1 %}
{% set resume_extruder = client.resume_extruder %}
{% set resume_extruder = client.resume_extruder|default("extruder") %}
{% if autoshift_on == 'true' %}
{% if extruder_filament and extruder1_filament %}
@ -771,7 +772,6 @@ gcode:
{% set autoshift = printer.save_variables.variables.auto_change_nozzle|default(False) %}
{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
{% set do_resume = False %}
{% set prompt_txt = [] %}
{% set runout = True %}
##### end of definitions #####
_FILAMENT_UPDATE
@ -943,6 +943,8 @@ gcode:
{% if hotend == "extruder1" %}
{% set z_offset_total = z_offset_total + z_offset %}
{% endif %}
SET_STEPPER_ENABLE STEPPER=stepper_z ENABLE=1
G4 P300
M118 Recovery in progress, please wait
RUN_SHELL_COMMAND CMD=_POWER_LOSS_RECOVERY PARAMS="{z_height} \"{last_file}\" \"{z_offset_total}\""
SDCARD_PRINT_FILE FILENAME=.plr/"{last_file}"

13
printer_config/F430NX/base.cfg
View File

@ -418,6 +418,7 @@ z_hop:5
gcode:
SET_STEPPER_ENABLE STEPPER=stepper_x ENABLE=1
SET_STEPPER_ENABLE STEPPER=stepper_y ENABLE=1
SET_STEPPER_ENABLE STEPPER=stepper_z ENABLE=1
SET_KINEMATIC_POSITION X=200 Y=150 Z=0
[gcode_macro _RESTORE_DEFAULT_EXTRUDER]
@ -470,14 +471,15 @@ gcode:
{% endif %}
[gcode_macro _PARK_extruder1]
variable_x_offset: 0
gcode:
{% set svv = printer.save_variables.variables %}
{% set x_offset = svv.nozzle_x_offset_val|default(0)|float %}
ACTIVATE_EXTRUDER EXTRUDER=extruder1
SET_DUAL_CARRIAGE CARRIAGE=1
SAVE_GCODE_STATE NAME=park_extruder1
G90
G1 X{475 + (x_offset if x_offset >= 0 else -x_offset)} F6000
G1 X{475 - (x_offset if x_offset >= 0 else 0)} F6000
G91
G1 X{0 if x_offset >= 0 else -x_offset} F6000
RESTORE_GCODE_STATE NAME=park_extruder1
[gcode_macro T1]
@ -501,7 +503,8 @@ gcode:
SET_DUAL_CARRIAGE CARRIAGE=1
SAVE_GCODE_STATE NAME=park1
G90
G1 X{455 + (x_offset if x_offset >= 0 else -x_offset)} F6000
G1 X{455-x_offset} F6000
SET_GCODE_VARIABLE MACRO=_PARK_extruder1 VARIABLE=x_offset VALUE="{x_offset}"
RESTORE_GCODE_STATE NAME=park1
{% if "z" in printer.toolhead.homed_axes | lower %}
SET_GCODE_OFFSET Z={z_offset} MOVE=1
@ -1164,6 +1167,8 @@ gcode:
{% if hotend == "extruder1" %}
{% set z_offset_total = z_offset_total + z_offset %}
{% endif %}
SET_STEPPER_ENABLE STEPPER=stepper_z ENABLE=1
G4 P300
M118 Recovery in progress, please wait
RUN_SHELL_COMMAND CMD=_POWER_LOSS_RECOVERY PARAMS="{z_height} \"{last_file}\" \"{z_offset_total}\""
SDCARD_PRINT_FILE FILENAME=.plr/"{last_file}"