# Hardware

There are no recommended screens, but the minimum supported resolution is 480x320.

In general, if the device can show a GNU/Linux desktop, then KlipperScreen should work too.

#### Hardware known to work

* [BTT PI TFT50](https://www.biqu.equipment/collections/lcd/products/bigtreetech-pi-tft50-v1-0-tft-display-for-raspberry-pi-3d-printer-part)
* [BTT HDMI5/7](https://biqu.equipment/products/bigtreetech-hdmi5-v1-0-hdmi7-v1-0)
* [Raspberry PI 7" Touchscreen](https://www.raspberrypi.org/products/raspberry-pi-touch-display/)
* [Hyperpixel 4](https://shop.pimoroni.com/products/hyperpixel-4)
* [3.5" Elegoo](https://www.elegoo.com/de/products/elegoo-3-5-inch-tft-lcd-screen)
* [3.5" RPi Display](http://www.lcdwiki.com/3.5inch_RPi_Display)
* [5" HDMI Display-B](http://lcdwiki.com/5inch_HDMI_Display-B)
* [VoCore](https://klipper.discourse.group/t/hardware-known-to-work-with-klipperscreen/35/7)
* [WAVESHARE 4.3 inch DSI LCD](https://www.waveshare.com/4.3inch-dsi-lcd.htm)
* [DFrobot DFR0550](https://wiki.dfrobot.com/5%27%27TFT-Display_with_Touchscreen_V1.0_SKU_DFR0550)
* [Android phone](Android.md)


* [More known hardware in the klipper discourse](https://klipper.discourse.group/t/hardware-known-to-work-with-klipperscreen/35)

### Configuration

Follow the manufacturer instructions on how to install your screen. In general if you see a white screen, then it's not properly installed, ensure that you at least see a console, Then [install](Installation.md) KlipperScreen, if you are having troubles refer to the [troubleshooting page](Troubleshooting.md) for further information.

## Screen rotation

[Moved to Rotation](Troubleshooting/Rotation.md)

## Touchscreen touch rotation

[Moved to Touch issues](../Troubleshooting/Touch_issues/#touch-rotation-and-matrix)