CreatBotKlipperScreen/docs/Zcalibrate.md

Zcalibrate

This panel supports various modes of operation to assist in the calibration of the Z axis of the machine. It's strongly suggested to read Klipper documentation about Bed level

Buttons

• "Start" will initiate the only method available, or ask the user if multiple methods are available.
• The raise(+) and lower(-) buttons send TESTZ Z=distance where distance is selected in the bottom row.
• Accept will send ACCEPT
• Abort will send ABORT

Calibration methods

Endstop (Z_ENDSTOP_CALIBRATE)

Available when an physical endstop is defined for [stepper_z]

See Klipper documentation: Calibrating a Z endstop

Probe (PROBE_CALIBRATE)

Available when a probe is defined. (BL-Touch is a probe)

See Klipper documentation: Calibrating probe Z offset

Bed mesh (BED_MESH_CALIBRATE)

Available when a probe is not defined and [bed_mesh] is defined

this mode lets you create a mesh leveling bed using the paper test in various points.

!!! warning DO NOT adjust the bed screws while using this mode.

Adjust the screws using the [bed screws](Screws.md) panel before running this tool.

Delta Automatic/Manual (DELTA_CALIBRATE)

Available when the kinematics are defined as delta.

See Klipper documentation: Delta calibration

!!! note KlipperScreen will automatically Home(G28) if needed