Alfredo Monclus 8a8c6c064c

Graph in temp panel, combine preheat and temp (#393 )

* Graph in temp panel, combine preheat and temp

* Fix target not working properly

* Fix initial preselect

* Add the ability to change in delta temps

* Make the label translatable

* Add Unit to the label

* Add de/select button to popover

* Warn the user if nothing was selected

* Fix templabel

* Fix to comply with pep8

* Fix colors, thanks Jordan

* Fix popover selection

* Update docs image

* Gain horizontal space

* Gain even more horizontal space (remove target)

* Fix temperature_fan

* Add icon and style to temperature_fan

* List preheat deprecation in breaking changes

* Use the printer maximum temperature

* Cleanup target and fix popover select

* Fix codestyle

* Add extra preheat presets

* Change Class name

* Update docs image

* Improve Maximum temperature handling and Temperature fans

2022-01-11 00:39:42 -05:00

1.9 KiB

Raw Blame History

Panels

Job Status

Bed Level

type: bed_level

The bed level panel has the ability to have preset locations from Klipper. Please see documentation on the following Klipper Sections:

Important Note: Due to Klipper using the bltouch/probe offsets in screws_tilt_adjust, if a bltouch/probe is enabled KlipperScreen will add the offset to the defined screw values. This will not occur if bed_screws section is used.

This panel will favor screws_tilt_adjust over the bed_screws section. If screws_tilt_adjust is defined, an extra button for Screws Calibrate will appear. This button runs the SCREWS_TILT_CALCULATE command and shows the results on the panel.