15 lines
1.1 KiB
Markdown
15 lines
1.1 KiB
Markdown
# KlipperScreen
|
|
|
|
KlipperScreen is a touchscreen GUI that interfaces with [Klipper](https://github.com/kevinOConnor/klipper) via [Moonraker](https://github.com/arksine/moonraker). It can switch between multiple printers to access them from a single location, and it doesn't even need to run on the same host, you can install it on another device and configure the IP address to access the printer.
|
|
|
|
### Documentation [](https://klipperscreen.readthedocs.io/en/latest/?badge=latest)
|
|
|
|
[Click here to access the documentation.](https://klipperscreen.readthedocs.io/en/latest/)
|
|
|
|
### Inspiration
|
|
KlipperScreen was inspired by [OctoScreen](https://github.com/Z-Bolt/OctoScreen/) and the need for a touchscreen GUI that
|
|
will natively work with [Klipper](https://github.com/kevinOConnor/klipper) and [Moonraker](https://github.com/arksine/moonraker).
|
|
|
|
[](https://klipperscreen.readthedocs.io/en/latest/Panels/)
|
|
|
|
[More Screenshots](https://klipperscreen.readthedocs.io/en/latest/Panels/) |