CreatBot/CreatBotKlipperScreen

alfrix c047bed518 bed_level: hide the panel if bed_screws or screws_tilt_calculate are not defined

there are printers with fixed beds that don't need this panel

2022-08-01 12:23:40 -03:00

2.1 KiB

Raw Blame History

Panels

Job Status

panel: job_status

Bed Level

panel: bed_level

The bed level panel has the ability to have preset locations from Klipper. Please see documentation on the following Klipper Sections:

!!! important: [bed_screws] uses Nozzle positions and [screws_tilt_adjust] uses Probe positions

This panel will favor [bed_screws] but if it's not defined, the probe offset will be applied to the defined screw values in [screws_tilt_adjust], this way the position buttons behave like if [bed_screws] was defined.

Bed Mesh

panel: bed_mesh

Extrude

panel: extrude theme:material-dark

Fan

panel: fan

Fine Tune

panel: fine_tune

Gcode Macros

panel: gcode_macros

Move

panel: move

Network

panel: network

Power

panel: power

Print

panel: print

Settings

panel: settings

System

panel: system

Temperature

panel: temperature

Z Calibrate

panel: zcalibrate

Limits

panel: limits

Retraction

panel: retraction

Input Shapers

panel: input_shaper