2.2 KiB
Configuration
In the KlipperScreen folder, a file KlipperScreen.conf allows for configuration of the screen. This document will detail how to configure KlipperScreen. A default config is included here: ks_includes/KlipperScreen.conf
Preheat Options
[preheat my_temp_setting]
# Temperature for the heated bed
bed: 40
# Temperature for the tools
extruder: 195
Menu
This allows a custom configuration for the menu displayed while the printer is idle. You can use sub-menus to group different items and there are several panel options available. It is possible to have a gcode script run on a menu button press. There are two menus available in KlipperScreen, __main and __print. The __main menu is displayed while the printer is idle. The __print menu is accessible from the printing status page.
A menu item is configured as follows:
[menu __main my_menu_item]
# To build a sub-menu of this menu item, you would next use [menu __main my_menu_item sub_menu_item]
name: Item Name
icon: home
# Optional Parameters
# Panel from the panels listed below
panel: preheat
# Moonraker method to call when the item is selected
method: printer.gcode.script
# Parameters that would be passed with the method above
params: {"script":"G28 X"}
# Enable allows hiding of a menu if the condition is false. This statement is evaluated in Jinja2
# Available variables are listed below.
enable: {{ printer.power_devices.count > 0 }}
Available panels are listed here: docs/panels.md
Certain variables are available for conditional testing of the enable statement:
printer.bltouch # Available if bltouch section defined in config
printer.idle_timeout # Idle timeout section
printer.pause_resume # Pause resume section of Klipper
printer.probe # Available if probe section defined in config
printer.power_devices.count # Number of power devices configured in Moonraker
A sample configuration of a main menu would be as follows:
[menu __main homing]
name: Homing
icon: home
[menu __main preheat]
name: Preheat
icon: heat-up
panel: preheat
[menu __main print]
name: Print
icon: print
panel: print
[menu __main homing homeall]
name: Home All
icon: home
method: printer.gcode.script
params: {"script":"G28"}