13233ca878
* major docs update * Delete info.md * update file permissions * added screenshots and updated first-boot.md
47 lines
1.4 KiB
Markdown
47 lines
1.4 KiB
Markdown
---
|
|
layout: default
|
|
title: Operating System
|
|
parent: Manual Setup
|
|
grand_parent: Setup Guides
|
|
nav_order: 2
|
|
permalink: /setup/manual-setup/operating-systen
|
|
description: >-
|
|
Manual Setup: tips and recommendations for the OS.
|
|
---
|
|
|
|
# {{ page.title }}
|
|
{{ page.description }}
|
|
|
|
Do **not** use an OctoPi image as it can cause unforeseen (avoidable) problems.
|
|
{: .warning }
|
|
Don't forget to enable SSH and configure a network if using Wi-Fi.
|
|
{: .info}
|
|
|
|
It is recommended to use a clean [Raspberry Pi OS 32-bit Lite](https://downloads.raspberrypi.org/raspios_lite_armhf_latest){:target="_blank"} image (previously called Raspbian).
|
|
|
|
We recommend you follow the RaspberryOS official [documentation](https://www.raspberrypi.org/documentation/installation/installing-images/){:target="_blank"} to flash and install the operating system to your SD card.
|
|
|
|
Once you have finished the installation and are connected via SSH, you can continue.
|
|
|
|
## Requirements
|
|
|
|
Install the required packages and update the system:
|
|
|
|
```bash
|
|
sudo apt update && sudo apt upgrade
|
|
sudo apt install git dfu-util unzip
|
|
```
|
|
|
|
**Verify that your distribution's Python 3 package(s) are version 3.7 or newer.**
|
|
{: .alert }
|
|
|
|
Moonraker requires Python 3.7 and will not operate without it.
|
|
|
|
You can check the current Python version installed to your operating system with the following terminal command:
|
|
```
|
|
python3 --version
|
|
```
|
|
|
|
---
|
|
[< table of contents](index.md){: .btn } [next step >](klipper.md){: .btn }
|