CreatBot/CreatBotMainsail
11
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
CreatBotMainsail/docs/macros.md
Stefan Dej bc0d1ed6df update install doc with link zu macros and update macros.md 
Signed-off-by: Stefan Dej <meteyou@gmail.com>
2020-09-19 22:59:28 +02:00

1.5 KiB
Raw Blame History

Useful macros for Moonraker/Mainsail

pause / resume / cancel

#is required to load the pause_resume module in klipper
[pause_resume]

[gcode_macro PAUSE]
rename_existing: BASE_PAUSE
default_parameter_X: 230    #edit to your park position
default_parameter_Y: 230    #edit to your park position
default_parameter_Z: 10     #edit to your park position
default_parameter_E: 1      #edit to your retract length
gcode:
    SAVE_GCODE_STATE NAME=PAUSE_state
    BASE_PAUSE
    G91
    G1 E-{E} F2100
    G1 Z{Z}
    G90
    G1 X{X} Y{Y} F6000

[gcode_macro RESUME]
rename_existing: BASE_RESUME
default_parameter_E: 1      #edit to your retract length
gcode:
    G91
    G1 E{E} F2100
    G90
    RESTORE_GCODE_STATE NAME=PAUSE_state MOVE=1
    BASE_RESUME

[gcode_macro CANCEL_PRINT]
rename_existing: BASE_CANCEL_PRINT
default_parameter_X: 230    #edit to your park position
default_parameter_Y: 230    #edit to your park position
default_parameter_Z: 10     #edit to your park position
gcode:
    M104 S0
    M140 S0
    M141 S0
    M106 S0
    CLEAR_PAUSE
    SDCARD_RESET_FILE
    BASE_CANCEL_PRINT

customize klipper default commands

for example, if you want to adjust the BED_MESH_CALIBRATE command, which will execute under "heightmap > calibrate".

[gcode_macro BED_MESH_CALIBRATE]
rename_existing: BASE_BED_MESH_CALIBRATE
gcode:
    #before the original gcode
    BED_MESH_CLEAR
    QUAD_GANTRY_LEVEL
    G1 X125 Y125 Z5 F6000
    #the original gcode
    BASE_BED_MESH_CALIBRATE
    #after the original gcode