66 lines
2.2 KiB
Markdown
66 lines
2.2 KiB
Markdown
---
|
|
layout: default
|
|
title: First boot
|
|
parent: MainsailOS
|
|
grand_parent: Setup Guides
|
|
nav_order: 3
|
|
has_children: false
|
|
permalink: /setup/mainsailos/first-boot
|
|
---
|
|
|
|
|
|
# First boot
|
|
|
|
Insert the flashed SD card into your Pi and connect other desired/necessary hardware (ethernet, USB to 3D printer, webcam).
|
|
|
|
Power on the Pi and leave it to boot.
|
|
|
|
**The initial boot of MainsailOS may take some time to expand your "root" filesystem. The larger the SD card, the longer the first boot will take.**
|
|
{: .warning}
|
|
|
|
Initially the green LED on the Pi will be extremely active. After some time it will only intermittently flicker, indicating it has likely completed the boot sequence.
|
|
|
|
The web ui should now be ready to access on your local network:
|
|
|
|
```
|
|
http://mainsailos.local
|
|
http://<IP address of your pi>
|
|
```
|
|
|
|
## Mainsail.cfg
|
|
|
|
**Important:** Include the mainsail.cfg into your printer.cfg
|
|
{: .warning}
|
|
|
|
Mainsail will not work unless Klipper is told to include its configuration. This can be achieved either by placing the contents of mainsail.cfg into your printer.cfg.
|
|
|
|
To do this, open the default printer.cfg in the Mainsail web GUI:
|
|
|
|
|
|
|
|
|
|
|
|
Add the following line:
|
|
|
|
```yml
|
|
[include mainsail.cfg]
|
|
```
|
|
and click on the "Save & Restart" button.
|
|
|
|
## Updates
|
|
|
|
Once you've successfully navigated to the Mainsail web ui we _thoroughly_ recommend that you run updates.
|
|
|
|
Klipper, Moonraker and Mainsail have fast development cycles and whilst we do our best to ensure MainsailOS ships as close to the bleeding edge as we can, there will always be a short delay before releases make it into the image.
|
|
|
|
We recommend that you enable and use the [built in update-manager](../../update/update-manager) to perform a system update, then update the stack components (Klipper, Moonraker, Mainsail)
|
|
|
|
|
|
|
|
|
|
MainsailOS is now configured, and we can get Klipper's [printer.cfg](klipper-setup) setup.
|
|
|
|
---
|
|
[< tool selection](../mainsail-os.md){: .btn } [next step >](klipper-setup){: .btn }
|
|
|