CreatBotMainsail/docs/necessary-cfg.md

layout	title	nav_order	has_children	permalink
default	Necessary Configuration	5	false	/necessary-configuration

Mainsail requires a minimum configuration to function properly. It should give you a warning at startup if the required parts are not found in your configuration.

Required configuration

virtual_sdcard

This allows gcode file uploads.

[virtual_sdcard]
path: ~/gcode_files

display_status

This is required for messages in your status panel, if you don't have a [display] in your configuration.

[display_status]

pause / resume / cancel

This enables pause / resume in mainsail.

[pause_resume]

Macros

for pause / resume / cancel functionality

These should be modified to your own needs. {% raw %}

[gcode_macro PAUSE]
description: Pause the actual running print
rename_existing: PAUSE_BASE
gcode:
    ##### set defaults #####
    {% set x = params.X|default(230) %}      #edit to your park position
    {% set y = params.Y|default(230) %}      #edit to your park position
    {% set z = params.Z|default(10)|float %} #edit to your park position
    {% set e = params.E|default(1) %}        #edit to your retract length
    ##### calculate save lift position #####
    {% set max_z = printer.toolhead.axis_maximum.z|float %}
    {% set act_z = printer.toolhead.position.z|float %}
    {% set lift_z = z|abs %}
    {% if act_z < (max_z - lift_z) %}
        {% set z_safe = lift_z %}
    {% else %}
        {% set z_safe = max_z - act_z %}
    {% endif %}
    ##### end of definitions #####
    PAUSE_BASE
    G91
    {% if printer.extruder.can_extrude|lower == 'true' %}
      G1 E-{e} F2100
    {% else %}
      {action_respond_info("Extruder not hot enough")}
    {% endif %}
    {% if "xyz" in printer.toolhead.homed_axes %}    
      G1 Z{z_safe}
      G90
      G1 X{x} Y{y} F6000
    {% else %}
      {action_respond_info("Printer not homed")}
    {% endif %}

[gcode_macro RESUME]
description: Resume the actual running print
rename_existing: RESUME_BASE
gcode:
    ##### set defaults #####
    {% set e = params.E|default(1) %} #edit to your retract length
    #### get VELOCITY parameter if specified ####
    {% if 'VELOCITY' in params|upper %}
      {% set get_params = ('VELOCITY=' + params.VELOCITY)  %}
    {%else %}
      {% set get_params = "" %}
    {% endif %}
    ##### end of definitions #####
    G91
    {% if printer.extruder.can_extrude|lower == 'true' %}
      G1 E{e} F2100
    {% else %}
      {action_respond_info("Extruder not hot enough")}
    {% endif %}  
    RESUME_BASE {get_params}

[gcode_macro CANCEL_PRINT]
description: Cancel the actual running print
rename_existing: CANCEL_PRINT_BASE
gcode:
    TURN_OFF_HEATERS
    CANCEL_PRINT_BASE

{% endraw %}

Optional

customize klipper default commands

for example, if you want to adjust the BED_MESH_CALIBRATE command, which you can run from "heightmap > calibrate". {% raw %}

[gcode_macro BED_MESH_CALIBRATE]
rename_existing: BASE_BED_MESH_CALIBRATE
gcode:
    #before the original gcode
    BED_MESH_CLEAR
    QUAD_GANTRY_LEVEL
    G1 X125 Y125 Z5 F6000
    #the original gcode
    BASE_BED_MESH_CALIBRATE
    #after the original gcode

{% endraw %}